Nice video. Thanks for the info it's gonna help me a lot. I just received my new black headlights for my Titan, it will be the same procedure as this. I think it's so stupid how Nissan design this and made it a pain in the ass to swap out a headlight lens. Anyway I thumbs up your video.
Nacho 0341 thank you! I really like the performance of them. I do regret that I didn't got them with the LED , but now I put HID and I'm happy with the performance. Since I got them few of the lower small led stop working, so that might be something to think about it.
Video would be better if you take us slowly through the process one thing at a time and show us what you are doing. That's why I'm trying to watch your video. I'm not tuning in to see IF you can do it, I want to see how step by step you do it, which you're not really taking the time to show. You could also take the time to show his you adjust the lights too.
@@adrianrecla4766 at 18:33 you have the DTRL on which is the H3 bulb and then at 18:36 you have the H1 high beams on so how is it that the high and low beams are the same? I'm just trying to figure out how to set up mine
KamenNick when I got them, I didn't want to pay 100$ more for the led bulbs. Even though I really like that white light, so I just got the regular halogen bulbs, the throw is really good but I don't like the color.
Hi from Bulgaria, I'm also planning to change my Pathfinder headlights, so do you recommend these headlight over the standard stock ones? Are these better with more light throw and better night visibility? I'll use them with LED bulbs. And one more question, when you're on high beams, did the low beams stay on as well?
KamenNick much better than the stock ones.I recommend that you will buy them whit the led from them. I put different led in them and the light pattern was really bad. Now I have hid kit and I think that the throw is really good. I have an other video with the difference between all of them. You should check it out
Josue Dr Jesus you going to have to cut and connect the daylight running light wires,is the only way and for the turning light bulbs you'll have to buy a yellow one and cut the wite wire
Hello. I really don't know or see what would be the difference between 2005 and 2011( it's the same model) but from what I remember in the site says that they're good for 2005-2007 or 09 I don't remember exactly. Look them up on carid and hopefully I'll find more information.
He is right. That is what it says on the site, but I can not, for the life of me, find halo headlights, or much else, for a pathfinder between '08 and '12. I was actually wondering the same thing...if the headlights are compatible or not?
4 years later and it’s still very useful THANK YOU
Nice video. Thanks for the info it's gonna help me a lot. I just received my new black headlights for my Titan, it will be the same procedure as this. I think it's so stupid how Nissan design this and made it a pain in the ass to swap out a headlight lens. Anyway I thumbs up your video.
Thanks for the helpful preview of the work I will need to do.
Brilliant video! Thank you Sir.
OK,MERSI MULT ESTI UN MAESTRU.
Love the accent!! 😂🤣😂🤣😂💯
Thank you ,
Great job! And they look nice. Thinking of putting some on my Xterra. Compared to your old set, how do these look in the evening?
Nacho 0341 thank you! I really like the performance of them. I do regret that I didn't got them with the LED , but now I put HID and I'm happy with the performance. Since I got them few of the lower small led stop working, so that might be something to think about it.
they look nice
Kieth Thomas thank you! I do like them.
Great but it's not white .the original is Xenon headlights
Video would be better if you take us slowly through the process one thing at a time and show us what you are doing. That's why I'm trying to watch your video. I'm not tuning in to see IF you can do it, I want to see how step by step you do it, which you're not really taking the time to show. You could also take the time to show his you adjust the lights too.
I agree..im interested in the wiring steps
I'm looking for something like this for my 2010 pathfinder can you help ?
I think that I got those from carid, but probably you can find them some other places too.
, or right is high but you got it
nice job , where did you get the lights from, Thanks
Pete T. From CARID.com
What if you do not have daytime running lights? Which wires will I need to connect?
daryl young I made a video about all the wires connections and I explained some different ways to connect them.
Adrian Recla Thank You!
daryl young you're welcome!
The best and easy way is connect to side mark light...
@@adrianrecla4766 can you send the URL??
What bulbs did you use to convert it to HID? I know it comes with h1 and h3 but did you need a bulb adapter to mount the HID bulb inside the housing?
No need. You just take out the h1 halogen and put back the h1 hid. It is a bit bigger, but it fits good enough
@@adrianrecla4766 you're talking about the H1 for the high beams right? So you only ran HIDs on the high beams and not the low beams?
In that housing both high and low beam are h1 . I only put hid for the low beam
@@adrianrecla4766 at 18:33 you have the DTRL on which is the H3 bulb and then at 18:36 you have the H1 high beams on so how is it that the high and low beams are the same? I'm just trying to figure out how to set up mine
@@TooTallMike I'll try to rewatch the video later and remember exactly what I've done and give you an answer
What year is your pathfinder?
It was 2005
Plase can send me the link to buy
the original owner of the frontier i just bought has these crappy lights. i can't wait to put the original back in. These lights suck.
Why you said in the thumbs of the video: "Best mistake ever"? You're not happy with the light they throw?
KamenNick when I got them, I didn't want to pay 100$ more for the led bulbs. Even though I really like that white light, so I just got the regular halogen bulbs, the throw is really good but I don't like the color.
Hi from Bulgaria, I'm also planning to change my Pathfinder headlights, so do you recommend these headlight over the standard stock ones? Are these better with more light throw and better night visibility? I'll use them with LED bulbs.
And one more question, when you're on high beams, did the low beams stay on as well?
KamenNick much better than the stock ones.I recommend that you will buy them whit the led from them. I put different led in them and the light pattern was really bad. Now I have hid kit and I think that the throw is really good. I have an other video with the difference between all of them. You should check it out
Look into the retrofitsource.com projector upgrade for the spyder headlight assembly's. Its a dramatic improvement.
I'm looking for a video to help me conned my headlights and I can't see how this was done by watching this video
SALUT ADRIAN,CIT COSTA FARURILE ALEA DE PATHFINDER?
Cred că au fost aproape 300$ si pentru încă 100$ vin cu led-uri
Would you be able to tell me how to connect all the wires and everything?? I’m getting the same ones and I’m not sure how the wiring goes ...?
Josue Dr Jesus you going to have to cut and connect the daylight running light wires,is the only way and for the turning light bulbs you'll have to buy a yellow one and cut the wite wire
Adrian Recla can you send me a pic to see how yours are connected so I know how to do it ..?
Josue Dr Jesus I will later today
Adrian Recla thanks man I appreciate it
Josue Dr Jesus I will actually make a video so will be easier to understand comparing with a picture 😉
Do these lights work for pathfinder 2011??
Hello. I really don't know or see what would be the difference between 2005 and 2011( it's the same model) but from what I remember in the site says that they're good for 2005-2007 or 09 I don't remember exactly. Look them up on carid and hopefully I'll find more information.
He is right. That is what it says on the site, but I can not, for the life of me, find halo headlights, or much else, for a pathfinder between '08 and '12. I was actually wondering the same thing...if the headlights are compatible or not?
@@ezrabrooks8551 Bro I got a 2012 an really want to install the fuckers they look so nice. It looks like where the bolt mounts are is the same though.
, your left light is low
People coming at you are on the left