DIY CO2 System for Planted Aquarium | Citric Acid and Baking Soda Method

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Enhance the health and growth of your aquatic plants with a DIY CO2 generation system using citric acid and baking soda! In this comprehensive guide, we'll show you how to create a budget-friendly CO2 setup that will provide your planted aquarium with the essential carbon dioxide it needs for thriving plant life. Whether you're a beginner or a seasoned aquarium enthusiast, this step-by-step tutorial will walk you through the process, from assembling the CO2 generator to maintaining optimal CO2 levels.
    Bottle A
    200g Citric Acid Powder.
    Mix with 600ml Water until dissolved.
    Bottle B (Tube with 'T' Joint)
    200g Baking Soda
    Mix with 200ml Water until dissolved.
    Elevate your planted aquarium to the next level by harnessing the power of DIY CO2. With readily available ingredients and a little know-how, you can create an environment where your aquatic plants flourish and create a stunning underwater landscape. Don't miss out on this opportunity to create a thriving ecosystem within your aquarium. Hit play and embark on your journey to a lush and vibrant underwater world!
    Affiliate Links:
    Planted Aquarium DIY Co2 Generator Bottle Cap A & B
    amzn.to/44zme02
    Pneumatic Flow Speed Control 6mm Tube
    amzn.to/3PfLe83
    Citric Acid Crystals 200 Gram
    amzn.to/3qICHRT
    Baking Soda 200Gm
    amzn.to/3OXTQyO
    Air Control Valve for Aquarium
    amzn.to/3OWRGiV
    Transparent U Bend for Co2 Tube
    amzn.to/3PqMN3r
    Neo Ruby Co2 Diffuser
    amzn.to/3suxQ7p
    Scape Brothers Evolve Macro (200ml) & Micro (200ml) Fertilizer for Planted Aquariums
    amzn.to/3Phwg1B
    SCAPE BROTHERS Planted Aquarium Micro, Macro Fertilizer Kit
    amzn.to/3EglBOd
    #PlantedAquarium #DIYCO2 #AquariumPlants #CO2Generation #CitricAcid #BakingSoda #Aquascaping #AquariumCare #PlantGrowth #AquariumEnthusiast #AquariumTips #GreeneryUnderwater #AquariumLife #CO2Boost #DIYAquarium #UnderwaterGarden #DIYProjects #AquariumCommunity #PlantCare #CO2Injection #AquariumMaintenance #AquaFlora #DIYCO2System #AquaticPlants #amudhaquascapes #scapebrothers #petzlifeworld #natureaquarium #aquarium

КОМЕНТАРІ • 60

  • @James-ik1rv
    @James-ik1rv 16 днів тому

    Super bro.
    How long does the acid come?

  • @killerrk6684
    @killerrk6684 10 місяців тому

    Hi bro,
    1. Is this safe?
    2. Blast Aaha yedha Chances irukka?
    3. Off Panna mudivuma?
    4. 2 feet tank yedhana naal Vaum?

    • @AmudhAquascapes
      @AmudhAquascapes  10 місяців тому

      1. It is safe
      2. Yes. Sometimes it happens.
      3. No. It will run for 24 hours.
      4. 10 to 15 days depends on the plant mass.

  • @kiranupadhya1069
    @kiranupadhya1069 4 місяці тому

    Very informative video, Thank you .
    I have 160 litre tank, how much Co2 do I need?

    • @AmudhAquascapes
      @AmudhAquascapes  3 місяці тому +1

      Use a CO2 indicator to check the amount of CO2
      amzn.to/4c1j4Xq

  • @subhampatra1507
    @subhampatra1507 7 місяців тому

    How much is the price of the caps and doest the air controller leak?

    • @AmudhAquascapes
      @AmudhAquascapes  7 місяців тому

      Please check the link in the video description for price. It doesn't, it is best to check for leakage.

  • @trivenkat
    @trivenkat Рік тому

    Excellent bro awaiting for this long time.
    1. How to stop during not co2 required time
    2. Any smell or any harmmess for sensitive fishes and shrimps

    • @AmudhAquascapes
      @AmudhAquascapes  Рік тому +2

      1. You can close the controller or you can use an air pump.
      2. No smell and it will not harm live stock if CO2 is in the right quantity. Use CO2 indicator.

  • @rjmech-il2lk
    @rjmech-il2lk 7 місяців тому

    How much we need to provide CO2 bro for 60p tank bro and light should be on while providing CO2 bro ?

    • @AmudhAquascapes
      @AmudhAquascapes  7 місяців тому

      Yes add CO2 only when the light is ON. Use a CO2 Drop Checker/Indicator to check the amount of CO2 in the water column.

  • @shankarvg5118
    @shankarvg5118 Рік тому +1

    Sir.i have been watching all your videos,i am from b'lore.sir apart from online where can we get bottle cap.please let me know.T-U sir.

  • @charleskiran02-11
    @charleskiran02-11 Рік тому +1

    Hi bro how r u. Where we will get all those caps and other plastic materials

  • @judesondhas6704
    @judesondhas6704 Рік тому +1

    Bro evlo naal idhu co2 produce pannum

  • @ganesharjunan6813
    @ganesharjunan6813 9 місяців тому

    Hi sir can we use oxigen control value instead of pneumatic flow control valve

    • @AmudhAquascapes
      @AmudhAquascapes  9 місяців тому

      Yes, you can. Make sure that the air valve doesn't leak.

  • @lordofsiva4211
    @lordofsiva4211 5 місяців тому

    In this method the same quantity of material will use in diy system how many days it will work

    • @AmudhAquascapes
      @AmudhAquascapes  5 місяців тому

      2-3 weeks for a 30L Aquarium with medium plant mass.

  • @vikneshv5209
    @vikneshv5209 2 місяці тому

    I have done the same setup as per you instruction but co2 is not generated what to do?

    • @AmudhAquascapes
      @AmudhAquascapes  2 місяці тому

      Did you use baking soda or baking powder? If you used baking soda then check for leakage around the caps and joints.

    • @vikneshv5209
      @vikneshv5209 2 місяці тому

      I have used baking soda, and there is no leak, when i remove diffuser i can see bubbles coming when diffuser is fixed co2 is not coming

    • @vikneshv5209
      @vikneshv5209 2 місяці тому

      Is started after sometime, but over night all citrict acod water is transferred to baking soda and looks i have to again refill baking soda and citric acid? What could be the reason

    • @benstoneify
      @benstoneify 15 днів тому

      Video ku mattum tha its all ok

  • @charlesaaron2493
    @charlesaaron2493 11 місяців тому

    Can I keep both the bottles below the fish tank? That is my tank is on the table. Please let me know.

    • @AmudhAquascapes
      @AmudhAquascapes  11 місяців тому

      It is always safe to keep the bottles below the table.

    • @charlesaaron2493
      @charlesaaron2493 11 місяців тому

      @@AmudhAquascapes thanks a lot for your time 👍
      Also please let me know 1. How many times I should press the bottle in a day?
      2. The bottle you've used is a normal Coke bottle?
      3. How to stop the process at night time?

    • @AmudhAquascapes
      @AmudhAquascapes  11 місяців тому

      1. If you start it once you don't have to do it again.
      2. Yes, they are coke bottles. Use only soda bottles they only can withstand the pressure.
      3. You can stop it by releasing the pressure with the air control valve in the A cap. Instead you can put a air pump on timer (this is the better way).

    • @charlesaaron2493
      @charlesaaron2493 11 місяців тому

      Thanks a ton bro...

  • @shankarvg5118
    @shankarvg5118 Рік тому

    Sorry not connector what is the use of T connector?

    • @AmudhAquascapes
      @AmudhAquascapes  Рік тому

      After chemical reaction, the CO2 released goes to the citric acid bottle and builds the pressure through the T connector. Which prevents moving citric acid to baking soda bottle. You can know more here about the equilibrium www.co2supermarket.co.uk/diy-co2-kit-setup-instructions-guide-6.html

  • @srhoppy1853
    @srhoppy1853 Рік тому

    One time ready panni vecha ethana days varum bro.

  • @sundardivya2094
    @sundardivya2094 11 місяців тому

    Diy co2 la night time air pressure lock pana does bottle blast bro or entha issues varatha

    • @AmudhAquascapes
      @AmudhAquascapes  11 місяців тому +1

      I think when the pressure is stopped the reaction also stops. Mine is running 24hrs. You can know more about the process here www.co2supermarket.co.uk/diy-co2-kit-setup-instructions-guide-6.html

    • @sundardivya2094
      @sundardivya2094 11 місяців тому

      @@AmudhAquascapes giving c02 for 24hrs leds to fish dead bro??

    • @AmudhAquascapes
      @AmudhAquascapes  11 місяців тому +1

      Good surface agitation will help the gas exchange or you can use an air pump when the light is off.

    • @sundardivya2094
      @sundardivya2094 11 місяців тому +1

      @@AmudhAquascapes ok bro thankyou, while pressure vinger from bottle A to B, baking soda is coming back to A is there any way to stop this? Issue

  • @lathikpriyadharshini
    @lathikpriyadharshini 9 місяців тому

    Hello Anna. I tried this setup, CO2 is getting generated (CO2 is released from tubes in big bubbles) but when I connect diffuser, it is not sending any CO2 out.. any suggestions?

    • @AmudhAquascapes
      @AmudhAquascapes  9 місяців тому

      Please check for leakage around the caps and joints using soap water or you can submerge the entire setup into a bucket of water. If the pressure won't build up, the CO2 diffuser won't work.

    • @lathikpriyadharshini
      @lathikpriyadharshini 9 місяців тому

      No Anna, leaks yengayum ila.. pressure build agi iruku.. my bottles became stone hard after reacting with full gas. When I use DIY diffuser with syringe, Co2 is coming.. I think something wrong with the diffuser.. is there any way to treat the diffuser?

    • @AmudhAquascapes
      @AmudhAquascapes  9 місяців тому

      Which diffuser are you using? Please use bleach to treat the diffuser and try again.
      ua-cam.com/users/shortsZ2XcI1HP8N4?feature=share

    • @lathikpriyadharshini
      @lathikpriyadharshini 9 місяців тому +1

      After 30 mins of waiting it started tiny bubbles. Working fine now.. I got it from kolathur. Thank you for your response 🙏

  • @shankarvg5118
    @shankarvg5118 Рік тому

    Sir I went through whole video you have not explained about connecter.

  • @ramzanahmad4753
    @ramzanahmad4753 10 місяців тому

    citric acid bottle a prusser koodinapram autova citric acid backing soda voda mix aahi over prusser and citric acide um seekrame kaliyahiduthu, athuku enna pannalam

    • @AmudhAquascapes
      @AmudhAquascapes  10 місяців тому

      Nothing we can do bro. This happens sometimes for me also. There are a few disadvantages in DIY CO2. You can try a pressurized CO2.

    • @thiravidamanit1990
      @thiravidamanit1990 9 місяців тому +1

      A and B bottle ku naduvula extra oru NRV use Panna itha avoid pannalam bro but B bottle pressure la break Agatha alavuuku mattum Citric acid add pannunga.

    • @thiravidamanit1990
      @thiravidamanit1990 9 місяців тому

      ​​@@AmudhAquascapesbro bottle a la bottom la tube podama empty a vitrunga ungakuku yappa vanumo appa bottle a keela patha mare vache press Panna acid B bottle ku poidum then yappavum pola vachedulam so tube illatha Nala pressure koraiyum pothu varum air mattum B bottle ku pogum so problem varathu. Again namakum pressure koraiyum pothu again thala keela vache press Panna vandeyathu tha

  • @kannaabinnaa
    @kannaabinnaa Рік тому

    Iruku evalo bro selavu aagum.. ella plantskum CO2 vaikuma bro .

    • @AmudhAquascapes
      @AmudhAquascapes  Рік тому

      citric acid and baking soda oru 100 rupees varum bro. other things are one time investment only.

    • @kannaabinnaa
      @kannaabinnaa Рік тому

      @@AmudhAquascapes thanks for your reply

  • @hamzaimthiyaz2257
    @hamzaimthiyaz2257 6 місяців тому

    ❤❤❤❤

  • @TheHarish17
    @TheHarish17 Рік тому

    Bro, right after this video they just bumper the price to 700 Rs.

    • @AmudhAquascapes
      @AmudhAquascapes  Рік тому

      Try their website bro www.petzlifeworld.in/products/petzlifeworld-planted-aquarium-diy-co2-generator-quick-twist-bottle-cap-a-b-2-pcs-suits-all-water-bottles-leakproof-with-free-2-meter-co2-tube-and-2-check-valve