Resolved Bro. I spend the same with the phantom 4. You have to remove the battery 1 or 3 times from the drone without turning it off and wait for it to calibrate or level automatically, then connect the drone and do the drone controller synchronization and vice versa to update the sensor. regards
Avelino Archibold ive never had any hard landings with my drone and it happened to mine over the weekend i also have used extreme care when handling the gimble area so i seriously doubt i damaged my flex cable but you said i have to pull the battery out while the drone is still on?
I haven't had this error come up again since I've replaced the flex cable. If it does again though, I will take Avelino's suggestion and remove the battery a few times.
RAHMAT HIDAYAT it will cost a lot more than the $20 it costed me to buy the flex ribbon. If your drone is still covered under warranty, DJI will fix it for you. You will have to send it in and wait for them to get it back though.
Am experiencing the same issue .DJI go suck. Whats the point of having an expensive camera that comes with expensive repairs and also time wasting.Am thinking of selling mine.
Alvine Ouma by the view count on this video, it seems like many are experiencing or have experienced this problem. They are great cameras when they work, but if something goes wrong, it costs more money to fix it. My friend send his into DJI for a battery being lodged in the drone. They wanted $130 to fix it.
HI, I fixed this problem by changing camera's gimble flex cable. Flex cable is really fragile for some reason, magnetic field, dent and so on ... So weird for me but it was working again after this manipulation.
Keyvin Rodriguez this is how dji makes there money by making a drone that cost alot of money but has so many issues with it .that is why it is better just to have the cheap drones easy to fix and the parts are not expensive I regret buying the fantom 4 drone .toany problems and to expensive to fix I have a problem with my controller not charging so there for I can't fly my drone well this is what happens there smart only giving a,warranty for a short time because they new there products were gonna have a lot of problems
i have the same problem and when i was flying my drone i lost it connection. I was 250 meters and it drops down. total crashed it. i called DJI and they watched the data fly and they could't figure out what happen. now i sent it to them to fix it and probably i have to buy a new one. lost me phantom 4 pro and my $$$$
The fix to this problem is in my next video: ua-cam.com/video/2oDDrrKgv_M/v-deo.html
Resolved Bro. I spend the same with the phantom 4. You have to remove the battery 1 or 3 times from the drone without turning it off and wait for it to calibrate or level automatically, then connect the drone and do the drone controller synchronization and vice versa to update the sensor. regards
Avelino Archibold really, haven’t tried that before, thanks for sharing!
Avelino Archibold ive never had any hard landings with my drone and it happened to mine over the weekend i also have used extreme care when handling the gimble area so i seriously doubt i damaged my flex cable but you said i have to pull the battery out while the drone is still on?
Did this fix it?
I haven't had this error come up again since I've replaced the flex cable. If it does again though, I will take Avelino's suggestion and remove the battery a few times.
Just started having this issue with the p4, unfortunately the battery trick isn't working for me ;\
How much the cost if i send to the centre for repairing ?
RAHMAT HIDAYAT it will cost a lot more than the $20 it costed me to buy the flex ribbon. If your drone is still covered under warranty, DJI will fix it for you. You will have to send it in and wait for them to get it back though.
Am experiencing the same issue .DJI go suck. Whats the point of having an expensive camera that comes with expensive repairs and also time wasting.Am thinking of selling mine.
Alvine Ouma by the view count on this video, it seems like many are experiencing or have experienced this problem. They are great cameras when they work, but if something goes wrong, it costs more money to fix it. My friend send his into DJI for a battery being lodged in the drone. They wanted $130 to fix it.
Has it fixed it yet? what did you do for solution it?
David Losada Bermeo yes it has been fixed, a simple $12 fix by buying the flex cable.
HI, I fixed this problem by changing camera's gimble flex cable. Flex cable is really fragile for some reason, magnetic field, dent and so on ... So weird for me but it was working again after this manipulation.
Yes the flex cable is the weak point. It worked for me as well.
So what happened in the end?? did you replace it?
Camair droneboy waiting on the flex cable to arrive
this video not recom for watching, problem for this drone not found
DIVISION 2 ROG INDONESIA check the pinned comment.
I have switched cable not being the same problem
Hmm, does it work now?
Has it fixed it yet?
Yes, it is fixed now. I have both camera feed and recording capabilities. The flex cable was the problem.
It happens to me after a firmware upgrade...still haven't been able to fix it!!!!!!
Did you fix it? Jorge Tabora
I've been hesitant to upgrade my firmware lately for this exact reason.
Hi man where did you send it to buy? I have the same problem!!
Keyvin Rodriguez I bought the part and replaced it myself. See my latest video.
thanks man
Keyvin Rodriguez this is how dji makes there money by making a drone that cost alot of money but has so many issues with it .that is why it is better just to have the cheap drones easy to fix and the parts are not expensive I regret buying the fantom 4 drone .toany problems and to expensive to fix I have a problem with my controller not charging so there for I can't fly my drone well this is what happens there smart only giving a,warranty for a short time because they new there products were gonna have a lot of problems
Why post this video if you don’t know how to fix it
Please watch the next video: ua-cam.com/video/2oDDrrKgv_M/v-deo.html
How do i fix this?
Kegumaツ Flex cable replacement will fix it.
i have the same problem and when i was flying my drone i lost it connection. I was 250 meters and it drops down. total crashed it. i called DJI and they watched the data fly and they could't figure out what happen. now i sent it to them to fix it and probably i have to buy a new one. lost me phantom 4 pro and my $$$$
alejandro ochoa wow that sucks
I know, I am thinking now to buy a different one but i dont know which one. . I dont wanna spend that king of money and go thru the same problem. :(
alejandro ochoa That’s the thing with electronics, they aren’t perfect. DJI is the best known brand in the drone industry though.
Camera gimbol cable fold
Yes, I hope that fixed it.
Fucking expensive phantom All People on the World have same problem . Its 1200 $ shit .
Right, I think the mavik is lighter and does the same now.
Gimbal Camera
Thats what the drone uses.