WHY MY LS1 REBUILD DIDN'T LAST!!
Вставка
- Опубліковано 2 жов 2024
- What's up everyone! We've been busy on DALE30!
And a valuable lesson was learnt! CLEAN CLEAN CLEAN the motor and parts before re-assembling, After thinking I had a bad lifter it turned out to be WAY worse!
I have been trying to get this all repaired and going in one video but it has taken longer than expected for parts & machining, so I wanted to give you guys an update on the situation!
To support the channel Make sure you SUBSCRIBE for more
@Fazyluck_co
I overhauled my first ls1 in my 99 z28 back in 2005 Back when LS were very $$$$ It was first time I was had or built anything nice or could afford part's not outta the junkyard. Think i spent almost $1000 on just the fastener's. But anyhow we got her wrapped up and in the car. For 3 days I just ran her easy. Finally me and my brother got maybe mile from home the very first time I tried to get on it the motor went boom. It looked like I never torqued a fuckin thing. Been buyn junkyard motors since lol
Nice one , Joel the legend coming through!
The world needs more Joel's!
Hahahaha you don't want too many Joel's pal. The world can only handle so much sexy
I use a pressure washer to blast out the oil journals. Some blocks have plugs and oil passages that change angles. I pull those plugs out and pressure wash from all angles. Good luck with your reassembly and undersized crank!
I ended up doing that this time around! Several times to be sure after soaking the whole block in degreaser!
The motor is all back together and in the car so should be ready to start soon! Hopefully have a video up soon!
hey i have an ls1 with 419k miles, america miles sadly, on it. it is solid and easy to work with. you cn't go wrong. hope you get the motor running, let me know if you need anything
Thanks man! I think I have it sorted now! I'll have another update video up soon!
I have an ls1 with 140k and i want to keep it forever what did you do to keep it so long without a rebuild? Ive already done a bunch of gaskets, and im going to reseal the entire engine as well. Any other recommendations?
Did u measure the bearings
Mine hydrolocked with 55k miles because of dried out intake gaskets and a leaky cowl and I built a HCI 5.3 to save 3000$ lol
can the ls1 head be adapted to the old gm 151 4 cylinder?
What’s the tire spec