This is so helpful, I don’t even need to look on the instructions that IKEA offered. This video makes everything so easy. I built it by myself around 2.5 hours only!
Omg thank you! Thank you! Thank you! I followed your directions and didn’t even read the instruction manual! You do everything step by step - you are amazing!!!!! THANK YOU
Thank you so much man you are a life savior, Ikea's manual is shit and hard to understand while you are just making it so simple for us !! They should do a QR code with a video on each product they sell haha 🎉
You were a huge help. Thank you very much. I’ve been working on this thing a long time and I gotta get ready to go to bed. I take a shower. three drawers left for tomorrow.
Followed all the steps and made sureall the CR and CL, and DR and DL rails were in the right places but when I try placing drawers on the other side they hit up against the other drawers already placed in the middle. Unable to fully close one drawer. Any help is appreciated 😵💫
I followed this step by step, worked well for me (ikea probably won’t like this but.. it saved me some annoyance) the panels with the metal railing.. if you don’t have a child or small people to worry about and aren’t concerned about the fear of tipping or plan to anchor it to a wall anyway, you can remove those rails by unscrewing the top silver metal bracket thing before adding the drawer slide rails , cause that locking mechanism is so annoying, to deal with (the little black bar sadly doesn’t cleanly come off and I had to snap it off with a flathead screwdriver or heck even a butter knife can do the job
I wish I would’ve found this a month ago 😓 It took me 7 hours to build this and the bottom drawers don’t close all the way 😞I have no idea why… I have to raise them slightly for them to close all the way which is annoying. Do you know if it’s possible to remove the locks/security from the back as to open more than one drawer at a time? That feature is also super annoying I didn’t even know it had that before purchasing it😢
Excellent video tutorial, and extremely easy to follow. My only request would be to show us the exact amount of spacing for the tiny screws on the back of the board but other than that perfect video!
Did all this (just watched to confirm I followed the directions correctly) and all my drawers are lopsided and touching with some harder to open than others…….what did I do wrong?!??
It’s PROBABLY the locking mechanism rail inside of the left and right side wall panels, that rail with the little clips stops multiple drawers from opening at once and if it’s is like slightly ajar at all that thing kicks in, see if you can’t somehow get to that side panel and remove that rail
nowhere in ikea's instructions did it show what slides were CR and CL so thank you!! edit- nevermind, i see theyre imprinted on the slides. but still, thank you for the helpful video.
Ikea needs to bring back the original damn one. Just because some dumbasses didn't watch their kids and allowed the drawer to fall on top of them doesn't mean that everyone should suffer. These locks are ridiculous and cause the doors to sometimes jam shut.
26:25 is the most confusing step. I don’t understand how this is supposed to attach with the previous step. You showed it all from an angle that does not correlate with the instructions at all
Never mind. There was a severe lapse of judgment in my evaluation of this video compared with my dresser. I am sorry for being rude and I hope you can forgive me. I am constantly working on improving myself
You slide the cardboard along the back panel first and insert the cardboard back into the sides by opening them a little bit. I'm doing it now and it's no issue
😢 I officially hate Ikea I was told my mom was a recall and then they refused to replace it even though it cost $100 more they wanted me to spend extra $100 to get the same damn dresser and they gave me a hassle over 2 months without a dresser and refused to give me anything but a $200 gift card and then they out of nowhere after told me it was already in the mail told me they weren't giving me that either and I was like you sent people to my house to steal my dresser give me something now I have the Vihals dresser and its way smaller and just not what I wanted😂 Ikea is very much a joke now
This is a very detailed and straight to the point guide. I used it to assemble my IKEA drawer dresser and it came out perfect! Thank you so much.
You’re a lifesaver!!! Took me 6 hours to put it together myself but I did it lmao
Facts😂
This is so helpful, I don’t even need to look on the instructions that IKEA offered. This video makes everything so easy. I built it by myself around 2.5 hours only!
Wow best tutorial ever! I’m 8 months pregnant and assembly was so much easier with this video than the ikea manual👏🏼thank you for your service!!
You saved me with this video!! It was so much easier for me to follow this video instead of the manual. Thank you so much!!
Omg thank you! Thank you! Thank you! I followed your directions and didn’t even read the instruction manual! You do everything step by step - you are amazing!!!!! THANK YOU
Took me about 5 hours very helpful video, not one hiccup thanks man
Thank you so much man you are a life savior, Ikea's manual is shit and hard to understand while you are just making it so simple for us !! They should do a QR code with a video on each product they sell haha 🎉
Lifesaver ! If it wasn’t for this video , I wouldn’t be able to assemble this drawer. Thank you !
Thank you for producing this video, it made the assembly of the MALM so much easier.
Fantastic step-by-step tutorial! I followed along and did each step watching on my iPad and it came out perfect! Thank you!
Great video. The instruction booklet that came with the dresser was useful, but this video clarified the steps. Thanks and keep up the good work!
You were a huge help. Thank you very much. I’ve been working on this thing a long time and I gotta get ready to go to bed. I take a shower. three drawers left for tomorrow.
Thank you so much, it was the biggest help. IKEA directions i was lost. Your instructions were easy to follow… thank you again to happy i found you.
underrated content
Stuff like this doesn’t seem useful until u need it
Thank you so much for this video! We assembled it while watching and we absolutely love the dresser!
This is wsy more helpful thanthe booklet. Thanj you for helping us build our malm!
For me, it's the best tutorial so far. Thank you for your help.
thank you for making this less painful!
Built 2 of these dressers with this video thanks man!!
Thanks bro !! Was a pain but your vid helped so so much🔥👍🏼
You are a life saver! Thank you so much
Thanks a bunch you are a genius!
Thank you sooo much! So easy to follow. I was able to fix my mistakes bc of this video (drawers weren’t closing fully).
My drawer won’t go Inside it’s like it’s something blocking it from fully going in all the way and idk why 😢
Check that you placed the railings in the right direction.. it happened to me.. I had placed one that should have been on the left on the right side
Thanks so much for the video! It made putting together the dresser so much easier! Super appreciate this video.
Thanks for putting together this incredibly helpful video!
Thank you for your help!
This video was so helpful… thank you, genuinely!!!
Thank you so much for this video! You made it so easy to follow along.❤
Thanks for the video. Some holes were tighter than others but still got the job done
Life saviour! Your tutorial made set up such a breeze.
Very helpful!
Followed all the steps and made sureall the CR and CL, and DR and DL rails were in the right places but when I try placing drawers on the other side they hit up against the other drawers already placed in the middle. Unable to fully close one drawer. Any help is appreciated 😵💫
Mine came with dr and dl alongside cl and cr. My parts don’t match
Mine to ! Did you end up figuring it out ?
@@Problem-n2l yes. You have to open all boxes at once (even though they’re labeled separately)
@@AnOracleReadingWithMarie GOD BLESS YOUR SOUL !!! Thank you :)
Yeah had the same problem too. Spent 20 min looking for all the Cr parts
I followed this step by step, worked well for me (ikea probably won’t like this but.. it saved me some annoyance) the panels with the metal railing.. if you don’t have a child or small people to worry about and aren’t concerned about the fear of tipping or plan to anchor it to a wall anyway, you can remove those rails by unscrewing the top silver metal bracket thing before adding the drawer slide rails , cause that locking mechanism is so annoying, to deal with (the little black bar sadly doesn’t cleanly come off and I had to snap it off with a flathead screwdriver or heck even a butter knife can do the job
Thank you SO much for this!!
Can you remove the lock mechanism?
Your the best UA-camr in the world
This video was so clutch.. Thank you, it made things so much easier. I had no issues 🙌🏾
this was my first ikea build, i dont know what i would do without you bro 🙌
Very detailed and helpful! Thank you
Thank you for posting this!
I wish I would’ve found this a month ago 😓 It took me 7 hours to build this and the bottom drawers don’t close all the way 😞I have no idea why… I have to raise them slightly for them to close all the way which is annoying. Do you know if it’s possible to remove the locks/security from the back as to open more than one drawer at a time? That feature is also super annoying I didn’t even know it had that before purchasing it😢
Excellent video tutorial, and extremely easy to follow. My only request would be to show us the exact amount of spacing for the tiny screws on the back of the board but other than that perfect video!
My boxes didn’t come with the drawer slides in the very first step.
I hate the new locking mechanism. Anyone know how to get it off and will it work without it? Thx!
Did all this (just watched to confirm I followed the directions correctly) and all my drawers are lopsided and touching with some harder to open than others…….what did I do wrong?!??
Thank you, very helpful video 😊
my top left drawer is completley stuck after I put it in... what do I do?
It’s PROBABLY the locking mechanism rail inside of the left and right side wall panels, that rail with the little clips stops multiple drawers from opening at once and if it’s is like slightly ajar at all that thing kicks in, see if you can’t somehow get to that side panel and remove that rail
I unscrewed the drawer slides from the side panel and removed the rail assembly myself
Super fun putting it together with a person who thinks they know it all.
Appreciate this video was a life saver
nowhere in ikea's instructions did it show what slides were CR and CL so thank you!!
edit- nevermind, i see theyre imprinted on the slides. but still, thank you for the helpful video.
Yooooo thank you!! So helpful!! Took me exactly 3 hours! 😉🙌🏽😊 your video is on point!
Thank you so much. Very helpful.
can this be put together without a drill?
Yes
Amazing tutorial!!! Thank you!!!
Gracias brother, explicacion al detalle
None of the whole for my CR drawer sliders match up. What’s gone wrong here
Very helpful. Thanks!!!!
I don’t see the difference between the DR & DL drawer slide 😭 Somebody Help Me!!
If you look closely on the white part DL/DR is engraved in it… and the black pieces on them will be labeled L for left and R for right
The drawers lock and get stuck it’s a nightmare that black piece clicks and locks can I just remove it
It locks to prevent the dresser tipping over.. so it’ll only allow 1 drawer open at a time
Amazing thanks for the help bro
This helped sooooo much
Ikea needs to bring back the original damn one. Just because some dumbasses didn't watch their kids and allowed the drawer to fall on top of them doesn't mean that everyone should suffer. These locks are ridiculous and cause the doors to sometimes jam shut.
Thank you sir, this helped a lot
Thank you!
26:25 is the most confusing step. I don’t understand how this is supposed to attach with the previous step. You showed it all from an angle that does not correlate with the instructions at all
Never mind. There was a severe lapse of judgment in my evaluation of this video compared with my dresser. I am sorry for being rude and I hope you can forgive me. I am constantly working on improving myself
You slide the cardboard along the back panel first and insert the cardboard back into the sides by opening them a little bit. I'm doing it now and it's no issue
Or you can do it per the instructions. Either way you work the cardboard in all the slots
The locking mechanism doesn’t slide for me
27:24 That’s a DR rail and goes on the other side.
Anyone else missing a top panel ?
Nice, my box is missing the CR drawer slides. I guess I’ll be back!
Thank you 🙏
Mine didn’t come with the nails
I have 2 White and 1 brown side ....
I hate this drawer
why
Yes! It’s so flimsy! Better off paying more money for a sturdier product
@@daraudobong7195shoot I just bought it..
@@daraudobong7195 you probably didn’t even use wood glue
@@flufnug why would I need wood glue??😭 that wasn’t part of the assembly instructions
Thank you!!!
Have him record from behind you next time
Your the shit ❤
NUNEZ !
😢 I officially hate Ikea I was told my mom was a recall and then they refused to replace it even though it cost $100 more they wanted me to spend extra $100 to get the same damn dresser and they gave me a hassle over 2 months without a dresser and refused to give me anything but a $200 gift card and then they out of nowhere after told me it was already in the mail told me they weren't giving me that either and I was like you sent people to my house to steal my dresser give me something now I have the Vihals dresser and its way smaller and just not what I wanted😂 Ikea is very much a joke now
SO helpful, thank you.