@@bobbleczar Lol. Even on the oldest model (X1C), changing the hotend is a matter of taking off a magnetic held shroud, pulling 3 connectors, removing 2 screws and the hotend comes out. A hotend can be swapped in less than 60 secons if you really would rush it. If you use one of the many 3th party units (E3D, BTT, Slice, ....) it can be done even fast. Litterally _every_ part on the Bambu's are currently replacable. Sure, a lot of it can only be gotten from Bambu, but that's true for Prusa too. (where do you get a Buddy board, or a Nextruder part ? Ah yeah. Indeed. One source only) As for open source : show me where the (semi) opensource nature of a PrusaXL has ever resulted in the community adding functionality over the last 2 years ? Yup. "0". "Open Source" sounds so nice and "honest", but when it doesn't allow any community input in terms of advances or changes, the added value of it is absolutely zero in the real world. If Prusa would be "so open", we would have a Klipper build for the XL 2 years ago, just an example. On the other hand, Bambu actively supports projects like X1Plus (open source firmware for X1C machines). There's a reason why litterally everybody has come out with an "answer/copy" of the Bambu machines. Including Prusa, by the way. :D And that's fine : it forces Bambu's hand to come up with something better in 2025.
good freaking lord, that print is obviously assembled as you can see the layer lines on those claw bases going perpendicular to the build plate, AnyCubic are really bad liars.
i get using the same ideas of bambu but why do they all have to copy the look as well..... make yourselves stand out. the only thing that stands out from bambu is the price.... which we all know is for a good reason. be like buying the Jardons that you found beside the Jordans for 1/2 the price
Why not the Creality K2, other than the price? Or the K1 Max that isn't really max, L0Lz. It's actually Smalling by 50mm in the x&y axis and 100mm in the z
Lol... the comments dosen't look good for you... I clicked on this because I saw an Bambulab P1S and Anycubic channel. So If it was a Clickbait, it worked. You made so many mistakes on this video that People are pointing out in the Comments. I Really liked Anycubic but at the moment it's not looking good. I Got Your Kobra 2 and it was Horrible. You're already been roasting in the comment section. Disable Comments to Roast and disgrace Yourself or just make a new video. I also have Like/Dislike button Mod. You already have 1/3 negative bar...
you can do multicolor TPU in this machine and Bambu and reality and others, there is both "TPU for AMS" by several filament makers, as well as flexible PLA.
Write a better returns and warranty than the 14 day window bambu gives and you will steal a larger amount of the begginers looking for the "ready to print" machines.
Schöner Drucker, es würde sich sogar lohnen diesen zu kaufen wenn ihr eure User nicht zwingen würdet den Anycubic-Slicer zu verwenden, sondern ein ansteuern über Cura oder ähnliche Slicer zulassen würdet. Ihr habt damit seitdem leider die Möglichkeit genommen die Drucker freu zu konfigurieren, was für mich ein "leider definitiv nicht kaufen" Grund ist. Ebenfalls möchte ich den First Layer mit Mesh Bed level heightmap darstellen um in anhand dessen wirklich perfekt konfigurieren zu können. Das sind absolut wichtige Grundvoraussetzungen die eure Drucker seit dem App- und Slicerzwang leider nicht mehr erfüllen und dadurch nicht mehr Kaufbar sind. Bringt das bitte in Ordnung, dann werden eure Produkte auch wieder interessant.
I just downloaded "anycubic slicer next" that is Orca slicer but with light blue instead of green color accents lol... it works as orca so i think it's fine
Bambu Lab changed the world. Change my mind.
Call us back when its time to repair it or change a nozzle. Prusa is still king. Bambu is closed source junk.
@@bobbleczar I've changed parts and nozzles on my X1C, it isn't an issue, what's your complaint lol
@@bobbleczar prusa is like apple, way too overpriced for what it can deliver.
@@bobbleczar Lol. Even on the oldest model (X1C), changing the hotend is a matter of taking off a magnetic held shroud, pulling 3 connectors, removing 2 screws and the hotend comes out. A hotend can be swapped in less than 60 secons if you really would rush it. If you use one of the many 3th party units (E3D, BTT, Slice, ....) it can be done even fast.
Litterally _every_ part on the Bambu's are currently replacable. Sure, a lot of it can only be gotten from Bambu, but that's true for Prusa too. (where do you get a Buddy board, or a Nextruder part ? Ah yeah. Indeed. One source only)
As for open source : show me where the (semi) opensource nature of a PrusaXL has ever resulted in the community adding functionality over the last 2 years ? Yup. "0".
"Open Source" sounds so nice and "honest", but when it doesn't allow any community input in terms of advances or changes, the added value of it is absolutely zero in the real world. If Prusa would be "so open", we would have a Klipper build for the XL 2 years ago, just an example. On the other hand, Bambu actively supports projects like X1Plus (open source firmware for X1C machines).
There's a reason why litterally everybody has come out with an "answer/copy" of the Bambu machines. Including Prusa, by the way. :D
And that's fine : it forces Bambu's hand to come up with something better in 2025.
@@bobbleczar Bambu is the best 👌
When you show a perfect print @0:42 with no supports straight out the printer I can't believe anything that follows.
good freaking lord, that print is obviously assembled as you can see the layer lines on those claw bases going perpendicular to the build plate, AnyCubic are really bad liars.
well they likely paid someone to make the video that doesnt have any experience 3d printing
Dam 🤣 😭
Hahahaha, that's really funny
The clone wars II continue, Who is cloning what?
everyone cloning bambu this time lol
1:09 The quality.... ☠
fr
yeah but its ABS it shity material with my Bambu lab its also almost the same
@descreennerd802 Bambu lab is better quality then thay
1:50 who the hell stores filament like that. Do you hate space that much?
eeeeeeeeeeverybody cloning bambu rn
well, its a good thing for us - its nice to see our adoption of bambu is pushing technology in the right direction
every brand wanna be bambu lab now?
Just like every brand wanted to be Prusa for the last 10 years
@@danilaalpatov1374 True, and just like Prusa now came up with their own Bambu clone too. :D
GUYS!! Just wait for the Bambu Lab H2D....
nothing can beat bambu Lab
what's that?
@@ColeIsM3 new release soon
@@johannes0012 ah, i checked out the leaks it looks promising
i get using the same ideas of bambu but why do they all have to copy the look as well..... make yourselves stand out. the only thing that stands out from bambu is the price.... which we all know is for a good reason. be like buying the Jardons that you found beside the Jordans for 1/2 the price
2:13 models do not match the colors installed ...
Is there anything less inovative than copying another company.
What did they copy? Its called advancement its called innovating... Or do you expect them to stay in the same spot? 🤦
Bambu Lab: you can copy my homework but make it look a little different
Anycubic:
@1:36 you expect people to read that marketing double-speak?
So besides being in an enclosure what's the difference between this and the kobra 3 combo?
Give us a max version at 350mm cubed and I'm in
That print volume maybe the Pro-Series since Anycubic MAX FDM printers are usually 420x420x500MM Anycubic Chiron / Korba 2 & 3 MAX for examples.
Creality Ender 5 Plus 350x350x400 mm
Why not the Creality K2, other than the price?
Or the K1 Max that isn't really max, L0Lz. It's actually Smalling by 50mm in the x&y axis and 100mm in the z
i do hope they put time into warning young users about the dangers of being too close to melting plastics and breathing that air
it's enclosed anyway lol
@@sourrlemonsand? fumes will escape the printer anyway
i dont get the 'anyway'? do you not understand how air works? the enclosure is for keeping the heat inside, not the vapors
This is just a 1:1 copy of BambuLab
With my experience with Anycubic. The customer support is good but the printers suck
And this printer have resume print? Or will be another lie like The kobra 2 max ?
Lol... the comments dosen't look good for you...
I clicked on this because I saw an Bambulab P1S and Anycubic channel.
So If it was a Clickbait, it worked. You made so many mistakes on this video that People are pointing out in the Comments.
I Really liked Anycubic but at the moment it's not looking good. I Got Your Kobra 2 and it was Horrible.
You're already been roasting in the comment section.
Disable Comments to Roast and disgrace Yourself or just make a new video.
I also have Like/Dislike button Mod. You already have 1/3 negative bar...
bro bambu is so ahead
I mean, 649$ for an X1C is not bad tbh.
Do you trink it will be that good ?
It ships with brass nozzles, no lidar and no acrive chamber cooling, so its not even a P1S, let alone X1C
Nice p1s
哈哈哈哈
Facts 😂😂
1:01 who is this handsome man 😛
Multicolor TPU???
you can do multicolor TPU in this machine and Bambu and reality and others, there is both "TPU for AMS" by several filament makers, as well as flexible PLA.
1:02 Bambu slicer?
Orca i think
bambu slicer is fork of prusa which is fork of orca slicer
@@apratimpanwar orca slicer is fork of bambu slicer
It's Anycubic Slicer Next
@@apratimpanwar backards:
Slic3r>Prusa Slicer>Bambu Studio>Orca Slicer>AnyCubic Slicer & Creality Slicer 2024
Write a better returns and warranty than the 14 day window bambu gives and you will steal a larger amount of the begginers looking for the "ready to print" machines.
1:16 what is this goofy ahh timelaps💀
Who else here buying this. ✋
looks like they have no idea what the market wants...............
Printer will be really nice if quality will be great if in the test quality will be nice maybe i buy it
Schöner Drucker, es würde sich sogar lohnen diesen zu kaufen wenn ihr eure User nicht zwingen würdet den Anycubic-Slicer zu verwenden, sondern ein ansteuern über Cura oder ähnliche Slicer zulassen würdet. Ihr habt damit seitdem leider die Möglichkeit genommen die Drucker freu zu konfigurieren, was für mich ein "leider definitiv nicht kaufen" Grund ist. Ebenfalls möchte ich den First Layer mit Mesh Bed level heightmap darstellen um in anhand dessen wirklich perfekt konfigurieren zu können. Das sind absolut wichtige Grundvoraussetzungen die eure Drucker seit dem App- und Slicerzwang leider nicht mehr erfüllen und dadurch nicht mehr Kaufbar sind. Bringt das bitte in Ordnung, dann werden eure Produkte auch wieder interessant.
Ja würde mir auch gefallen. Aber hier muss wohl jeder sein eigenes Slicersüppchen kochen. ☹️
I just downloaded "anycubic slicer next" that is Orca slicer but with light blue instead of green color accents lol... it works as orca so i think it's fine
Too little too late. There's no reason to buy this over a P1S or P1P lol why wouldn't you make it larger at least...?
for the any cubic die-hards. every brand has them, and they are waiting for any cubic to do this.
379€ for the printer only ? P1S700+
550€ vs €800...
here we go again another x1c clone
Detest these type of promotional videos.
🎉
nintendo: ☠☠☠☠
I know, the blatant IP theft is universal with AnyCubic
pls do a giveaway i am using a cobra neo 2 and need an upgrade 😞😞😞
anycubic 4max reference!
Chinese copying chinese