After 14 years of working only on Toshiba copiers I'm now working for a small company that does a little bit of everything but none of it particularly well. Especially technician training. Thank you for this video. It's made my life a little less stressful.
Great video. This helped me to rescue a 12-year-old HP CP2025. Repair place said too old to fix and should be replaced - other than beginning to jam, it is still a reliable workhorse. Something I did miss though was I could not get to the pick roller on the screen unless I reinstalled the toners. I have another CP2025 with the same symptoms and will replace its rollers tomorrow. $40.00 gets me two laser printers back in action. Thanks for the video.
After replacing the pickup roller and separation roller, the jam in tray 2 still occurs. I also cleaned the feed rollers near the transfer belt. I hear the pickup roller try twice, and it manages to bring the paper close to the following rollers near the transfer belt
You should unplug the machine after rotating the roller, and move the pick up roller out of the way first to have easier access to the separation roller.
i have a continuos error on a lj m451.indicates jam tray 1, but there is no trace of paper. I changed the pick up and it's still the same Where is the sensor? any ideas
After 14 years of working only on Toshiba copiers I'm now working for a small company that does a little bit of everything but none of it particularly well. Especially technician training. Thank you for this video. It's made my life a little less stressful.
Great video. This helped me to rescue a 12-year-old HP CP2025. Repair place said too old to fix and should be replaced - other than beginning to jam, it is still a reliable workhorse. Something I did miss though was I could not get to the pick roller on the screen unless I reinstalled the toners. I have another CP2025 with the same symptoms and will replace its rollers tomorrow. $40.00 gets me two laser printers back in action. Thanks for the video.
After rotating the Pick Roller, Unplug machine and remove the pick roller first and then the separation roller. I find this method easier..
After replacing the pickup roller and separation roller, the jam in tray 2 still occurs. I also cleaned the feed rollers near the transfer belt. I hear the pickup roller try twice, and it manages to bring the paper close to the following rollers near the transfer belt
You should unplug the machine after rotating the roller, and move the pick up roller out of the way first to have easier access to the separation roller.
Instead of replacing the rubbers I add small amount of gasket restore (oil car) and clean it ...it make the rubber work again ..
Thank you
I'm trying to replace the separation roller on a similar machine which is the m541dn but that one seems to have a spring attached to it :/
i have a continuos error on a lj m451.indicates jam tray 1,
but there is no trace of paper.
I changed the pick up and it's still the same
Where is the sensor? any ideas
thanks
Good
"remove all paper from bin out bin is full"
what a problem..?
Never mind, no spring attached to it.
For some reason the pickup roller doesn't rotate when I click OK. What would this be?
James Lagnese Switch off printer by cable (not power button)
ММ ПМ I was able to get it done, eventually. :)
@@nokoolaid how? step by step please?
@@advancedhealthclinicutah It was 5 years ago. That's water under the bridge. Long under..
No se ve nada en menú
I swear, people that unwrap stuff on UA-cam just have to make as much noise with the plastic as they can.