4'' Table Saw - Byrnes Model Machines - overview
Вставка
- Опубліковано 21 сер 2024
- Review and brief demonstration of the Byrnes Table saw.
All-purpose Table Saw.
💡All videos about the WORKSHOP&EQUIPMENT in the PLAYLIST:
• Perfect WORKSHOР
Огляд модельної циркулярки Бернса та її можливості.
Універсальна настільна уиркулярка.
🎞Cutting planks to uniform thickness with a Table Saw:
(Калібрування рейок на циркулярці):
• Cutting planks to unif...
💡Ділюся досвідом з вибору і експлуатації циркулярок на своєму сайті:
My experience in choosing and using table saws:
www.shipphotog...
⚓️4'' Table Saw - Byrnes Model Machines:
Замовити можна тут 4'' Table Saw:
www.byrnesmode...
Delivery in almost all corners of the world.
Доставка є майже у всі куточки світу.
🎞You can find all my built models in this PLAYLIST:
• Full build-logs with m...
🔔Subscribe to the channel - not to miss any issue:
/ olhabatchvarov
💰Become a member of this channel to get more benefits:
/ @olhabatchvarov
🔥Official channel website:
www.shipphotog...
📨Contact me:
www.shipphotog...
⛵️GALLERY of my models:
www.shipphotog...
⛵️🇺🇸🇺🇦
#olhabatchvarov #shipmodelersworkshop
Дякую за детальний огляд, щей рідню. В планах на майбутнє є зробити щось подібне. Дуже сподобався ліфт підйому пилки. Вам творчих успіхів і всього найкращого.
Щиро дякую! Навзаєм!
Good review! The micrometer impressed me, which I find really useful.
Thanks for sharing!
Настолько подробного и всестороннего обзора я давно не видел , спасибо и конечно подписка !
I have owned this saw for over 10 years for making dollhouse furniture and I love it. As a machinist I have gone over it checking alignment, squareness etc. And I am impressed with its accuracy. I couldn't find anything wrong.
The eraser on a pencil makes an excellent push stick. I also use a strip of 1/8 inch Baltic birch with silicon on one edge.
For blades some are screw slotting blades, the thinnest is .008 inches. (From Thurston). This saw will cut down the centerline of a sharpened pencil without breaking the lead. I have made a lot of jigs for this from plexigass since I have a lot of access to scrap. For glue I use glacial acetic acid.
Finally I'll tell you something nobody else knows. Cut a strip of 1/8 inch thick wood to snugly fit in the right side miter slide and let it stick out the back a bit. Slide the fence over untill it touches the strip then lock it in place. Cut a strip of wood and measure it. It should measure 0.500 inches. If its off change the blade thickness. Lift the strip and move the fence over untill it stops again. It should be 1.000 inches or close to it. That's the fastest way I know to get a 1/2 inch wide strip.
WOW - Thank you very much for the tips!
Отличный станок, как раз для шикарной мастерской.
С огромным удовольствием смотрю ваши ролики. 👍
I was impressed by the capabilities this table-saw.
There is also micrometer, if you want you can cut the strips of the thickness you want.
I don’t think there are such particular companies in Europe.
In Italy there is Cremona Tools that build professional tunnel.
Congratulations again for your table-saw.
Escuse me for bad english.
😀👍👍👍👍
Thank you very much!
Got my table saw yesterday. Looks great and everythning feels precise. Have to test it this weekend :-)
Thank you. I own one and many accessories and love it! I just need a net for catching the flying cuts!
Great commentary Olha.
Вы умница!!!
Thank you for such a thorough review. I bought my Byrnes table saw in 2016 and it is still working flawlessly even on hardwoods. A couple of points…
1) Mr. Byrnes also sells a version with an extended 18” table. I have that version and find the additional 6 inches to be very valuable.
2) There is no riving knife and so the wood, on thin cuts, tends to fly back towards you. For that reason, I ONLY use the saw with a foot-switch so I can turn off the saw as it cuts through the final fraction of an inch. This will prevent/minimize any fly-back of the wood.
3) In one of your cuts, you use the miter gauge with the wood pressed against the fence. That is very dangerous since the wood can get trapped and break apart. You should only use the miter gauge or the fence, but NEVER both.
Yes, this is a really great and irreplaceable tool!
This video is just a demonstration of a table saw, not how to work on it!
This I demonstrate in my videos with the building of the models ...
ua-cam.com/video/WJNZQaKxvrk/v-deo.html
Belle présentation pour cette scie circulaire qui ma l'air d'être super et simple d'utilisation !
Merci! Oui, c'est la meilleure scie à table que j'ai jamais utilisée...
Você é uma excelente profissional e professora, parabéns!!!!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻😍😍😍😍😍😘😘😘😘😘😘🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Obrigado!
雙手千萬別離開圓鋸片太近唷!! 😊
That's really a great piece of engineering, I have a basic Proxxon, no blade height nor tilt adjustment, but this seems much superior in quality and flexibility! All of your kit for the price of...?
Indeed, thank you for the review
I had a proxxon's FET but that tool needs an extra $ 300-400 to upgrade it and to get a tool suitable for shipmodeling. So I started saving money for this one - but my husband got ahead of me and gave it to me for my birthday. The price starts from $ 450 + everything you choose additionally. Under the video there is a link to the manufacturer. There isalso a price calculator on the site...
Thank you for the video.
You're welcome!
Спасибо за обзор!!
Всегда пожалуйста!
Great review - just what I was looking for.
Thank You very much!
Thank you for this review!
My pleasure!
Byrnes makes a great saw. At this point, I must ask two questions: 1) how did you become involved with ship models? 2) your work suggests a professional effort over a hobby. Do you build on commission? Sell your work? Thank you!
In 2010, I bought a magazine with parts of a galleon and that's how it started. And I started selling because in order to start building the next model, I had to free up space from the previous one. And then the orders appeared ...
Очень смачный видеообзор.Снято красиво и очень профессионально.
Спасибо!
'Excellent review.
Glad you liked it!
@@OlhaBatchvarov Not only liked it followed it to your website. Inspiring. I also make model ships but from kits. It looks as if yours are scratch built. Excellent workmanship (and photography).
З святом, Незламна!
Отличная вещь! Только нужно доп.кожух на движок приделать. Чтобы древесная пыль и стружка на него по минимуму попадали.
Я пЬІлесошу станок после каждого использования. Так как мастерская она и же и студия - а злейший враг фото-техники ето пЬІль...
@@OlhaBatchvarov Не поверишь, я тоже стараюсь убираться. Но когда я узнал что мой токарный имеет щель и туда мусор летит, то самопальный кожух, немедленно изготовился и спасает дорогущий движок))))) Самое забавное, щель - это не брак. А так производитель спроектировал⁰) Так что это просто дружеский совет)
Благодарю за обзор! Буду заказывать!
Супер! Рада помочь!
Good review. The micrometer helps a lot I have the circular saw from Proxxon and it is not always easy to adjust the cut measurement.
Merci pour la démonstration. Je viens de recevoir la mienne et j'adore!
Very nice!
Thank you!
Very good review of this saw! I have a question though. On a full size tablesaw, the operation you are doing @ 5:17 is considered super dangerous! The thicker piece always being placed between the blade and fence so the thinner piece can fall away from the blade, and a push stick is used to push the bigger piece clear of the blade. If the thinner piece is between the blade and fence, there is a huge chance of kickback when the cut is completed because there’s no room for a push stick, and the thinner slice, being pinched between the fence and rotating blade gets shot out of the saw toward the operator at warp speed! My question being can the micrometer be moved to a location that would the thin piece to be on the far side of the blade from the fence? I really like this saw, but I don’t like what I see from the micrometer part as far as operator or bystander safety! Thanks!
Yes, you are absolutely right about the full size saw. But the specifics of shipmodeling are different. I suggest you see this table saw in use. You can find the link in the cards in the video or in the end screen. I will duplicate the link in the next message if UA-cam does not block it...
ua-cam.com/video/ge_OTqQXSfY/v-deo.html
@@OlhaBatchvarov Your video was an eye opener for me! I’ve always taken for granted that these little saws were underpowered, useless machines. Thanks to this video, I now know that they are surprisingly powerful and accurate, and have several very useful options! I’ve never built a ship model, being a longtime model railroader, but I can see the value in having one of them! My main interest at this stage of my life is railroad and mining structures, not so much the trains theirselves! While researching the Ultimation sander and slicer, I found a video from your channel on their website, and have enjoyed watching several of you vids since, and many more to go! Thanks for your response!
Came to say this exact thing as well. There's a number of problematic shots in your videos safety wise. This minisaw (which I own and use in mini making) is NO different in this respect.
I would consider adding a disclaimer if you don't edit the videos or at least review your cutting techniques.
even tho i don't understand what you said nice work . i would like to buy one can you tell me where i can find it .
This is a really good table saw. I left a link under the video (in the description) because UA-cam blocks messages with links
Hey am waiting for your message I would like to buy one 😊
@@RehobothProduction I already wrote you that the link in the description under the video!
I can't insert it in the comment, because UA-cam will block it!
byrnesmodelmachines(dot)com
You really do get what you pay for. The only thing I would different if I was to be the designer is to use two miter gears to drive the elevating screw. That way the elevating handle could be graduated in set amounts.
Maybe two other things. A tilting blade instead of a table. Also a riving knife.
A handy feature to have on the longer table version might be a way to mount a 3mm/1/8th" rotary tool for routing.
But extra features cost extra ¥£€$. Not in materials. The cost is in the labor.
Yes it really is!
But this is a great base and I can now upgrade and add new devices to this saw...
Great saw...great demo....I'm a scratch builder my present saw is a problem...thx
Thanks for watching!
Good effort no doubt about it. In regard to the sliding table I assume that the height / thickness of the wood that can be cut is reduced by the thickness of the sliding table which is ???????? It states on the Byrnes Website that this machine can cut up to 15/16ths of an inch (23mm) thick material. I am guessing that the sliding table base is about 1/8 th of an inch but it would be nice to know for sure. Thank you once again for a comprehensive review.
And so it is - you calculated absolutely correctly - thickness of the sliding table base is 1/8 inсh (3 mm) ...
@@OlhaBatchvarov Thank you for your prompt reply. 1/8th inch thick was a informed guess. Keep up the good work, all the best from Australia.
Ольга,-станочек шикарный !!! А в таком не стандартном положении удобно резать под углом? С приветом HDIV.
Привет!
Да там даже упор есть, или можно толкателем воспользоваться - идет так же как и в горизонтадьном положении...
I own one of these and have lost it! I moved house and packed it in a box and put it in a safe place but cannot find it after two years.
I’m so distraught because it cost me $1000 in New Zealand. It had all the accessories as well. I’m still looking🙈
It is sad!
I hope you will find this box!
Use a push stick for ripping and save your beautiful hands!
Thank you!
Yes, I use extra pieces of wood for this in everyday model building!
Hi again, I am already in the Byrnes club. Could you please explain or possibly make a short video on how to change the blades on this saw? Should I first unscrew the table or should I get there from the bottom? Do you use the regular blade that comes with the saw in this video?
My congratulations on your purchase!
I use 2 wrenches. I do it from the bottom. I just put the saw on its side and change the blade...
Here at 10:45 there is a short episode with a change of blade:
ua-cam.com/video/Fwgst8aQNkI/v-deo.html
Usually I cut large pieces with a regular blade and for finer work and a clean cut - I use a blade with more teeth...
P.S. I'm on vacation now - I'll be able to shoot a video in October with a detailed change of the blade.
@@OlhaBatchvarov Thank you. How do you block the axis on which the blade is mounted? I cannot see where do you attach the other wrench, the one at the bottom. Did you remove the cover that protects the belt?
@@gondebas I have not remove the cover that protects the belt - I just have a long enough wrench!
@@OlhaBatchvarov Yes, I saw that there is a hole from the front side. Thank you.
Good review. Have you compared this one to Proxxon table saw FET. It looks more silde than Proxxon, but s does the price.
Thank you!
I had a proхxon too but this one is better!
Ольга, доброго Вам дня 🤗. Дякуємо за те, що Ви ділитеся своїми знаннями 👍. Підкажіть, будь-ласка, чи можливо використовувати цей станок в квартирі на балконі ? Який в нього рівень шуму ? Чи ним необхідно користуватися лише в нежитлових приміщеннях ?
Та ще, підкажіть, будь-ласка, де його можна придбати ? Буду дуже вдячний за Вашу відповідь 🤗
Станок досить тихий. Я була дуже здивована цим. І має вивід під будівельний пилосос! Хоча від неї тирса не розлітається аж на стелю, як від китайських циркулярок. Бо раніше мені доводилося все накривати перед роботою зі станком, а потім все пилососити, бо на. Плконі приміщення не велике і все вкривалося шаром пилу. Як би тоді вже я мала таку циркулярку, я б максимум відкрила вікно для витяжки. Тирса від неї розлітається в радіусі 50 см від фрези і вона не перетворюється на дрібну куряву що висить у повітрі, а порівняно важка тирса - яку навколо я змітаю щіткою...
@@OlhaBatchvarovДякую Вам за відповідь 🤗. Та оце ж мене цікавить, чи не будуть сваритися сусіди 😉 за мою творчість в квартирі 😂. Якщо Вам не буде важко, напишіть, будь-ласка, який в нього, по технічним характеристикам рівень шуму 🙉 , томущо, можливо, мікрофон не передає оригінальний звук💤. Тому що з пилом я якось розбируся, а от з сусідами 😉😂. Наразі дуже Вам вдячний 🤗
اريد ان اشتري هذا المنشار
اين يباع وكم هو ثمنه وشكرا I want to buy this saw
Where is it sold and how much does it cost?
This is an American manufacturer, in the description under the video there is a direct link. Because UA-cam blocks comments with links to other websites!
شكرا ايتها الفتاه الجميلة ❤️❤️❤️❤️🍰👍
I was wondering if anyone is aware of a comparable micro saw available today since there has no indication that anyone is taking over production of the Brynes saw...😣
But at least Jim's family hasn't announced the closure of the company, so there's still hope that someone will save this production. As it happened with the Sea Watch Books publishing house. During the year with the new owner, the publishing house has published several new books and is currently expanding the list of authors...
@@OlhaBatchvarov Thank you, I remain hopeful.🙂
Buonasera, e fantastica, dove si può acquistare? Grazie Danilo
Temo che oggi - da nessuna parte! Il produttore di questi strumenti è morto nell'estate del 2023 e finora nessuno è riuscito a portare avanti questa attività.
Link nella descrizione sotto il video se sei interessato ad aggiornare lo stato di questa piccola impresa...
Hola, puedes por favor decirme, cuanto cuesta y en donde la puedo comprar, gracias de antemano felicidades.
I can't find any mini saw table that provides a 1/8 Kerf blade. Wasted my money on two products so far. and it appears this, proxxon and microlux don't offer 1/8 kerf blades either. Not useful if I can't match the kerf on my standard table saw for cutting kumiko strips
Check MALCO saw blades
Hi, could you please tell me which accessories are included in the standard equipment of the saw and which accessories have you purchased additionally?
The Tablesaw ships with the standard (1/8" high) rip fence, miter gage, a 4" 24-tooth carbide blade and the blade guard.
Additional blades of various sizes and kerfs are available, as well as a Sliding Table, Tilting Table, Rip Fence and Miter Gage extensions, a Taper Gage, a Micrometer, Miter Bar and Zero-clearance Insert...
@@OlhaBatchvarov Which of the additional accessories are present in your video? For example Sliding Table. I really cannot guess from Byrnes page if I may need it. The explanations about the additional equipment could not be more laconic. What of the additional accessories do you recommend buying?
@@gondebas It depends on what you plan to do. My husband gave me this table circular and compleсted it to his liking. He added a slider table and tilt. At the same time without a high fence and pusher. So I ordered them for myself because I almost do not use a slider and only once cut on a tilt table ...
This is a sliding table:
ua-cam.com/video/OEObBTP1vxg/v-deo.html
This is a tilt:
ua-cam.com/video/OEObBTP1vxg/v-deo.html
Ольга, приветствую. Практический вопрос: на сайте есть 2 варианта столов 12 и 18”. Вы похоже, используете 12 дюймов. Из вашего опыта этого достаточно или лучше заказать 18?
Доброго времени суток! Да у меня 12" в принципе достаточно с головой для моделизма. Но так как я на ней пилю всякие штуки для дома тоже то очень хочется иметь столик по больше...
@@OlhaBatchvarov я так и думал :)))
спасибо!
А какая толщина дюралевой пластины в основании торцевальной каретки? Попробую себе сделать такую.
Дно 3 мм, а бортики из 9,5 мм...
@@OlhaBatchvarov Ясно, спасибо.
Hello,
This Serra seems to be pretty accurate. Is it sold on Chinese websites? Thanks
Hі
This is an American manufacturer - link in the description under the video...
@@OlhaBatchvarov Thanks
Onde posso comprar e preço
Este é um fabricante americano! Link direto na descrição abaixo do vídeo!
Onde comprar a serra, qual o fabricante e o país de origem, moro no Brasil, obrigado?????😘😘😘😘😘🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
4'' Table Saw - Byrnes Model Machines
Link direto abaixo deste vídeo:
ua-cam.com/video/OEObBTP1vxg/v-deo.html
Magnífico equipamento!!! Onde se compra?
Obrigado!
Este é um fabricante americano "Byrnes Model Machines"
Link na descrição sob o vídeo, porque o UA-cam bloqueia comentários com links...
Hola donde comprar
¡Hola!
Enlace en la descripción debajo del vídeo!
Как вы делаете конусные мачты? Есть какой-то станок или по старинки ручками?
Можно на токарнике или сделать приспособу на циркулярку для скругления квадратных заготовок. Но я предпочитаю руками))) как вот тут на видео:
ua-cam.com/video/fRwQnbdFRNM/v-deo.html
@@OlhaBatchvarov Спасибо!
Where could I buy the blades? Thank you
Only blades can be ordered on Jim's website. Or directly from the manufacturer MALСO, but they have a minimum order amount of $100...
Did you ever consider the 18" table version?
I suspect my question was answered somewhat in one of the earlier questions.
When I bought this table saw, a large table was not yet available. But since I work on this tool more than just a modeler, I would choose a big table. Because sometimes it is not enough when you cut large frames or shelves...
Yes, I have similar questions. But this time, over the weekend, while I was at two exhibitions), I have accumulated more than 500 comments and half of them contain questions - I just can not answer instantly...
@@OlhaBatchvarov Thanks so much for your reply. I can only imagine how busy you are. Wonderful models and an excellent channel.
Where can I buy this saw in Australia
Direct link to the manufacturer in the description under the video!
cual es el precio de esta mini sierra de mesa
El precio comienza desde $ 475 - dependiendo de la configuración ...
Cuanto cuesta?
Enlace directo en la descripción debajo del vídeo!
Приветик,как называется эта модель,марка призводитель?Хочу такой же
Ето 4х инчевая настольная пила Бернса. Прямая ссЬІлка под видео в описании. Ютюб блокирует коментарии с линками по етому я не пишу полнЬІй адоес сайта:
byrnesmodelmachines(dot)com
@@OlhaBatchvarov спасибо
Can you pls tell me the weight
The tool is heavy, I can't lift it to weigh...
boa noite, me interessei na maquina, como faço para comprar ?
Isso está apenas no site do fabricante:
byrnesmodelmachines(dot)com
@@OlhaBatchvarov , bom dia !
estou interessado em comprar. Vcs podem entrar em contato ?
Where is it possible to buy?
Direct link in the description under the video.
P. S. UA-cam blocks comments with links...
Я так же держал рейки, когда распускал на мелкие и в конце среза палец соскочил и я остался без кончика пальца. Лучше коретку сделайте.
Я использую дополнительнЬІе планки при роспуске на рейки. В етом видео я показЬІваю только саму циркулярку, а не как рабртать на ней. В тот момент когда я снимала видео у меня не бЬІло толком даже чего пилить на ней. Давно уже думаю смонтировать видео именно как с ней работать, я уже накопила достатчно материалов за 2 года)))
i want buy in india delhi
The manufacturer delivers worldwide!
Link in the description under the video!
Добрый день. Подскажите где можно купить станок?
Доброго времени суток!
Добавила так же сайт в описании.
www.byrnesmodelmachines.com/tablesaw5.html
Кстати, китайцы передрали эту циркулярку со снижением качества и цены, опасайтесь подделок!
By the way, the Chinese plagiarized this circular with a decrease in quality and price, beware of fakes!
@@archi9084 Вау - не видела еще таких! Про китайский проксон - знаю))) Но тут без вариантом Джим Бернс сам собирает ети циркулярки и нигде больше как на его сайте их нельзя заказать.
На Бернсе нет расклинивающего ножа. Случаются ли обратные удары?
Как и на всех циркулярках никто етого не исключает. У меня просто все рейки затягивает обратно - циркулярка очень вьІсокооборотистая и у часто детали улетают обратно по етому стою сбоку на всякий случай. А пилю обьІчно с жертвенной доской сосньІ и вспомогальньІми брусочками-толкателями и - прижимаьелями, что б не допускать подобного...
@@OlhaBatchvarov Спасибо, понятно.
bom dia, onde comprar essa maquina?
4'' Table Saw - Byrnes Model Machines
ua-cam.com/video/OEObBTP1vxg/v-deo.html
too bad these were great but you can not get now hes passed away
Maybe someone will continue this business!
А, где купить в Украине?
Тільки напряму від виробника за лінком в описанні під відео! Але будьте готові сплатити мито при отримвнні посилки, якщо не помиляюся 32%...
@@OlhaBatchvarov спасибо
사고싶다..
비디오 아래에 주소가 있습니다
Ольга а вы не пытались самому делать парусники а не из наборов с вашими инструментами можна начинать делать
Я строю паралелтно 2 модели. По чертежам и из коробки. С нуля у меня в работе французкий катер Le CERF, тут есть видео с ее процесом:
ua-cam.com/play/PL2yU7nOqNxV9FyCahCx8j5zCcj2Dtt_N8.html
Кстати, китайцы передрали эту циркулярку со снижением качества и цены, опасайтесь подделок!
By the way, the Chinese plagiarized this circular with a decrease in quality and price, beware of fakes!
die Maschine ist ja toll, aber die Benutzerin hat wenig Ahnung vom Sägen
Das ist meine Lieblingsmaschine!
This saw is frighteningly expensive and out of reach for young modellers. It is only accessible to well-off people (or singles) or retirees with time and money on their hands. I am puzzled tho': it's not for kit builders, but for scratchbuilders.
Let's say without this tool, nothing prevents you from building kits!
But if you are ready to buy tools, it is better not to hurry and not to spend money on garbage-tools, and save enough to buy a quality machine!
If you live in Europe then this saw is too expensive to ship plus the import taxes make it out of reach, you are much better with the Proxxon FET table saw which is cheaper and available in Europe and is equally as good.
@@johnwayne1464 you are right...I would buy Byrnes but shipping and import taxes too much...I have buyed a proxxon fet
@John Wayne Well it can certainly get the job done but it is certainly not an equal quality tool (having used both)
Zdravstvuyte Olha! Gde mne kupit takuyu mashinku? V internete ne nashel. V Ameriku kak mne zakazat? Spasibo zaranee. Farhod.
hamraevharhod@gmail.com
Ви можете заказать ее только на сайте у Джима Бернса тут:
www.byrnesmodelmachines.com/tablesaw1.html
Он отправляет почти во все уголки мира.
DONT EVER PUT YOUR FINGERS SO CLOSE! use spare wood or something, that was very stupid
Thanks for the worry!
Looks like a toy to me
İm used dewalt dwe7492 😅
My husband has a Dewalt saw too - I sometimes borrow it if I need to cut something thicker than 1")))
@@OlhaBatchvarov a good husband always uses dewalt 😆im too
I'm unlucky . I live in Belgium and not possible to get it.🥲👋
Unfortunately, the manufacturer died last summer!