Great video with clear explainations. I was told also to add oil on the sealing part before i put them in place (drain washer, seal of the oil filtrer, O-ring of the oil filter cap). It is also important for those not having a torque wrench to not over tighten the bolts... you have mentionned it's always easier to add oil than remove some... i think it's also easier to add extra torque on a drain bolt that would suffer a mini mini leak instead of fixing a damaged thread. A last advice for those who have not torque wrench, it safe to check the proper tightening of bolts periodically especially after the few first rides. Anyway, very nice video, thank you for sharing. Thumb up from France 👍
I didn't I'm afraid. It was quite easy, just screw the wires onto the battery, and use cable ties to fix the cable underneath the tank. The cap's broken off the USB connector now, so I might replace it and I'll film it if I do!
Hi, hope all is well. If it's convenient could you post the model number( or identification number or serial number) for the sump washer and oil filter O ring in the description? I don't know which one to order online.
I got all the genuine parts from this site. I think the sump washer is #13 on this diagram: www.bike-parts-honda.com/honda-motorcycle/125-MOTO/CBF/2022/CBF125MM/Engine/CRANKCASE/103400/E_15/1/45503 and I think the oil filter O ring is #14 on here: www.bike-parts-honda.com/honda-motorcycle/125-MOTO/CBF/2022/CBF125MM/Engine/RIGHT-CRANKCASE-COVER/103400/E_06/1/45503 but check for yourself in case I made a mistake.
I've had the valve cover off on mine but because I can't find any definitive information on the valve clearances on this particular engine I've not been tempted to muck around with it. Nothing on this model appears to be remotely compatible with the old CBF125 so I don't completely trust copying the valve clearances for that model. I'm thinking I'll send my bike off to the mechanic to check valve clearances and then check for myself to see what the mechanic set the valves at. But at ~7000 kilometres it's not likely the valves will need adjusting yet anyway, so I could still use the feeler gauge to see where they're at now. I run myself around in circles wondering if I SHOULD just guess.
Valve clearances is next for me. A guy asked his honda garage and they said intake 0.08 +/- 0.02, exhaust 0.20 +/- 0.02 so I might just check with my branch before going with that. I agree, there's very little information as the bikes are still quite new but hopefully as more people get up to those mileages they'll share more info. I thought I'd get started with the oil change!
The manual says 4000 miles or annually, whichever comes first. I wouldn’t mind doing it a bit more often if you want to look after the bike long term. It’s supposed to be the best preventative maintenance for an engine.
Yes, not too hard. Work on the right hand side of the bike, take off the side panel and loosen/slide back the rear plastic (grey on mine) That takes one bolt, one screw and two plastic panel pins. Then unscrew the cover housing and wiggle it free. The filter itself has a little tab on the bottom to locate it.
The manual says it should be changed after the first 600 miles with a new filter. Then change the oil after 4000 miles or each year. Change the filter too after 8000 miles.
Sir I have a Honda sp 125 (cb 125 f) 2022 model...I used idemitsu irg5 10w30 mobil on my bike.is this mobil good?.. .so which is the best mobil for this bike.
The manual says: Honda 4-stroke motorcycle oil API Service Classification SG or higher, excluding oils marked as “Energy Conserving” or “Resource Conserving,” SAE 10W-30, JASO T 903 standard MA. If you can understand all that, you're a better man than I am.
Possibly the UK. it's the content that is important. Also this man knows what he is doing, using correct tools, including a torque wrench. This man is a compedent mechanic ! Watch and learn how to do basic mainenance on your vehicle. And be taught correct techneques.
@@richardshephard I get it why Honda put an oil filtre on that engine: it's much easier to service compared to all the other oil strainer+centrifugal filtre engines, despite representing an extra cost, although marginal. And we must not forget that this bike is designed to be a work horse or an entry level bike, so, economy is the goal. I've also watched your other video where you checked the air filtre, but on that case, on the CBF125 JC40 model, it's much easier, you just have to remove both seats. But on the other hand, on your model, because you get access to it sideways, debris won't fall into the airbox when you remove the filtre, something that might happen it you're not careful on the JC40 model. Cheers
Thanks mate! Loved that you mentioned the torque needed for the bolts !
Thank you for this detailled description. We successfully serviced my grandson's Honda.
@@uwemarkus8875 That’s excellent, well done. I fondly remember servicing my first car with my Dad.
Cheers mate, done my first oil change following your video. Easy. Will come back for advice on the next thing I don’t know how to do 😂
Glad to hear it, thanks! Let me know what the thing is if I haven't done it yet.
Hi! Thanks for video!
Need to replacement air filter?
Great video with clear explainations. I was told also to add oil on the sealing part before i put them in place (drain washer, seal of the oil filtrer, O-ring of the oil filter cap).
It is also important for those not having a torque wrench to not over tighten the bolts... you have mentionned it's always easier to add oil than remove some... i think it's also easier to add extra torque on a drain bolt that would suffer a mini mini leak instead of fixing a damaged thread. A last advice for those who have not torque wrench, it safe to check the proper tightening of bolts periodically especially after the few first rides.
Anyway, very nice video, thank you for sharing. Thumb up from France 👍
Hi Richard thank you will give it a go . Appreciate your help take care
Great channel! Thank you.
Muito bom, obrigado, acha que vale a pena tentar limpar o filtro de óleo que tem dentro do motor? Um tipo de rede metálica
I have never tried one. I could not see one available. The paper filter was not too expensive so I don't mind.
Nice vid. Where did you get the torque specs . The user manual provides very little information.
Now you mention it, I've no idea! I wouldn't have said it without a good reason, but I honestly don't remember where I found that.
Thank you for the video and very informative at the end with how to reset the service light mich appreciated
Great 🎉 Do you have a video for USB Charger on CB125F
I didn't I'm afraid. It was quite easy, just screw the wires onto the battery, and use cable ties to fix the cable underneath the tank. The cap's broken off the USB connector now, so I might replace it and I'll film it if I do!
Hi, hope all is well.
If it's convenient could you post the model number( or identification number or serial number) for the sump washer and oil filter O ring in the description?
I don't know which one to order online.
I got all the genuine parts from this site. I think the sump washer is #13 on this diagram: www.bike-parts-honda.com/honda-motorcycle/125-MOTO/CBF/2022/CBF125MM/Engine/CRANKCASE/103400/E_15/1/45503
and I think the oil filter O ring is #14 on here: www.bike-parts-honda.com/honda-motorcycle/125-MOTO/CBF/2022/CBF125MM/Engine/RIGHT-CRANKCASE-COVER/103400/E_06/1/45503
but check for yourself in case I made a mistake.
@@richardshephard thanks so much
I would recommend changing the o ring every time you change filter. Otherwise 😢😢😢😢
I've had the valve cover off on mine but because I can't find any definitive information on the valve clearances on this particular engine I've not been tempted to muck around with it. Nothing on this model appears to be remotely compatible with the old CBF125 so I don't completely trust copying the valve clearances for that model.
I'm thinking I'll send my bike off to the mechanic to check valve clearances and then check for myself to see what the mechanic set the valves at. But at ~7000 kilometres it's not likely the valves will need adjusting yet anyway, so I could still use the feeler gauge to see where they're at now. I run myself around in circles wondering if I SHOULD just guess.
Valve clearances is next for me. A guy asked his honda garage and they said intake 0.08 +/- 0.02, exhaust 0.20 +/- 0.02 so I might just check with my branch before going with that. I agree, there's very little information as the bikes are still quite new but hopefully as more people get up to those mileages they'll share more info. I thought I'd get started with the oil change!
Thanks for the vid.How often/ after how many miles do you change the oil?
The manual says 4000 miles or annually, whichever comes first. I wouldn’t mind doing it a bit more often if you want to look after the bike long term. It’s supposed to be the best preventative maintenance for an engine.
Hi Richard are you planning to do an air filter change by any chance ? Videos are great thanks
Good idea, thanks! I did have a look at it but it was still very clean. I'll film that one for sure when I do it.
Thank you . Is it a simple process ?
Yes, not too hard. Work on the right hand side of the bike, take off the side panel and loosen/slide back the rear plastic (grey on mine) That takes one bolt, one screw and two plastic panel pins. Then unscrew the cover housing and wiggle it free. The filter itself has a little tab on the bottom to locate it.
Hola Richard, el castrol power l es semisintetico y honda aconseja SINTÉTICO.
Un abrazo y gracias por tus vídeos 🔥🔥🛑🛑⛔️
0:16 "because Nick said so" 😊
Sir, Namaste from India, How frequently should engine oil be changed? for SP 125? i'm planning to buy :)
The manual says it should be changed after the first 600 miles with a new filter. Then change the oil after 4000 miles or each year. Change the filter too after 8000 miles.
@@richardshephard thank u sir
What is this button left to the power button?
@@vasilismanatos8288 Do you mean the bicycle bell? Just thought it would be funny.
Can this oil be poured into this motorcycle "Motul 7100 10w40 Fully Synthetic" ??
Sir I have a Honda sp 125 (cb 125 f) 2022 model...I used idemitsu irg5 10w30 mobil on my bike.is this mobil good?.. .so which is the best mobil for this bike.
The manual says: Honda 4-stroke motorcycle oil API Service Classification SG or higher, excluding oils marked as “Energy Conserving” or
“Resource Conserving,” SAE 10W-30, JASO T 903 standard MA. If you can understand all that, you're a better man than I am.
Hi, what size/brand oil filter does this bike use? Thanks
See packet at 0:19. I just bought the genuine honda one because I couldn't easily see a 3rd party model. There might be more available now.
13nm for drain plug ???
30NM :-)
Best information ❤
Which country is this video belongs to
in the UK
Possibly the UK. it's the content that is important. Also this man knows what he is doing, using correct tools, including a torque wrench. This man is a compedent mechanic !
Watch and learn how to do basic mainenance on your vehicle. And be taught correct techneques.
Good job
Thanks! :)
Merci..👌🇨🇵
The engine have a very good grunt for a honda bike. In India honda bikes sounds like battery bikes.
In india we call this bike as SP125
What is the Price($) in india ?
@@xxlalbatross3287Rs.1,20,000
Sir ,but I am speaking from India ( kolkata)
Uaw!!! A Honda 125 with a disposable oil filtre!...Honda techs may be losing their minds...
I only just realised you're only supposed to change it every other oil change anyway. Nevermind.
@@richardshephard I get it why Honda put an oil filtre on that engine: it's much easier to service compared to all the other oil strainer+centrifugal filtre engines, despite representing an extra cost, although marginal. And we must not forget that this bike is designed to be a work horse or an entry level bike, so, economy is the goal. I've also watched your other video where you checked the air filtre, but on that case, on the CBF125 JC40 model, it's much easier, you just have to remove both seats. But on the other hand, on your model, because you get access to it sideways, debris won't fall into the airbox when you remove the filtre, something that might happen it you're not careful on the JC40 model. Cheers