We and Those who started with FBW are the ones who saw their accomplishments these past months, they are creative from the first release they made, and they are quick to work, I respect them very much these heroes. We will also see the flying giant A380 in the best future work. thnx sim pilot for you report.
I dropped a 20 spot a few months back... it time for another soon... remember quality payware is around $80 for PMDG or maybe even $100?... we'll see at the end of the year when they roll out their new MSFS planes/jets... so yes 'free' is good but remember they are working for 'free' as well
Good to note that around 5:11 BAT 1 has a discharge rate of about 4A. HOT BUS 1 uses a bit more power on the ground but later this goes down to about 1A for each of the hot buses. At this point in the video the batteries are not connected to the DC BAT BUS. A battery being connected to DC BAT BUS would result in a line being displayed between the battery and DC BAT BUS on the ECAM, and the battery's voltage on the overhead panel instantly displaying the voltage of whatever is charging it.
That noise just before u turned the batteries on is actually one of the VHF knobs under the radio frequency switch it spins really fast for some reason, small bug I’m not sure they’ve noticed
This is absolutely fantastic, that you can calibrate throttle like this. I was scratching my head when i got new throttle 2 days ago on how to do it. This makes is very easy and i cant be happier.
Thank the maker! I was flying with a totally out of alignment throttle config for two weeks now. Was getting really pissed off, but the settings are just in game now, which is amazing, thanks!
As usual, your timely explanations of these updates makes the learning curve seem so much less challenging a climb! I finally installed the Airbus stick and throttle quadrant this weekend, and have been wondering if I was ever going to get the everything configured right. Up pops your video - problems solved. Many Thanks!!
They just added this into the installer, just a heads up. Quoting the announcement Tweet: "We are happy to announce that a new experimental version is available in our new installer and that includes: - custom fly-by-wire system - custom autopilot system - new engine model with autothrust system - new Primary Flight Display (PFD)"
Started a flight in the A320NX while watching this video without reading the title properly :) Taxing to the runway i found out my throttle was off, during takeoff i found out it was way off! Atleast i now know the LVR ASYM message shows up in the PFD. :D
Thanks for the explanation! Especially the throttle setup. During test flight last time LVR CLB was flashing while throttle was in CLB mode and speed increasing. Don’t know why that happened…
It is possible they were nudged slightly too far forward. If this happens it will command above climb thrust and override the auto thrust! Hope this helps!
An alternative method (that I use) for inputting SimBrief username to the EFB: Write the username in another program (e.g. notepad), then simply copy and paste it into the EFB
Super glad about this. I was extremely frustrated with the tca quadrant. I couldn’t get it to properly align and the flight stick was causing the plane to stall. But finally with this new update it’s all fixed except the autopilot. With this new update, my autopilot stopped working and idk what to do. 😩
The systems modelling is getting better and better as time goes along. But the MCDU, NAV, and VNAV systems need vast improvement. I know it's using MSFS' nav systems for the navigational capabilities, but yeah is this being worked on?
excellent video - but when I setup my reverse thruster it jumps to +1.00 instead of -1.00 so it's going to TO GA when applying reverse thrust. (Thrustmaster Airbus Edition)
Great video, thank you. I can't get the FlyPad to do anything now, all I see is a "plane" on a white background, have tried with all 3 versions. Can't work it out as it used to work OK.
THX for this, I was going bonkers trying to get around that last fix and patch. my Thrustmaster basically has been a pain since getting because the changes come so fast on each side... MSFS and FBW... then we are left in the dark wondering why our throttles don't work... AGAIN...
So there are three options when you go to the FLYBYWIRE installer. There are three choices of buttons, There is the LEFT option, the MIDDLE option, and the RIGHT hand-side option...... Which one are you choosing?
Does anyone else find the new side tablet too dark even with its brightness in settings turned up? I find it hard to read. Especially contrasted against the light from the window above. My version is a week old so maybe they improved it?
Do love this aircraft. Small question. Just picked up the rudder pedals to go with the airbus joystick and throttle. When taxing on the ground do you use the pedals or the joystick twist? I know in air it’s the pedals (and during takeoff and landing)
So the previous procedure to load fuel from Simbrief from within the MCDU is no longer in use? Also can we save the simbrief flightplan in the FMS by linking it to the EFB? I am a bit lost with all these options now :)
Great video like always. I wish to the stairs would stay until you decide to you don't want it anymore. But for some reason. Msfs does that. It should work just like the jetlag does.
do us a favor a 'post a 'link' to you set up for throttle configurations from your file so we can try your set up... make it a PDF so it will just download and open maybe?
Love the videos and bookmarked as one of my favourites - well done !. I have tried for 2 days to make the throttle calibration work but to no avail. Could you, or someone else, be able to tell me how to clear the presets I have tried from the EFB calibration page so I can restart with a fresh sheet of paper ! Or perhaps guide me to the directory on the computer that is storing the files for these settings, Cheers . . .
I don’t know how to contact you otherwise, but I’m wondering if you would consider doing a video on hand flying a landing in the a A320NX... what do you do if the airport has no Nav aids or your AP is not cooperating? I’ve encountered a couple airports in South America where I’ve had to hand fly a landing and it’s been a real struggle. I also find that RNAV is unreliable and sometimes need to hand fly the decent. I find I’m fighting the AP even if I disengage it. :(
Are the fuel tank capacities modelled as per the plane? I have seen variations between MSFS versions and FBW versions being as much as 50% different. I searched on line and couldn't get the actual tank capacities.
Very informative, thanks. Question: With the new Experimental version the SPD, HDG and ALT are no longer in Managed mode after powering the plane and you can’t place them in Managed mode. It wasn’t like that in the previous Custom FBW. Is that how it is in the real A320 and can you explain?
The throttle calibration needs work. It freezes for minutes at a time and the Set from Throttle is broken and does not display the accurate values with my Saitek Throttle Quad.
For us who have standard version msfs and so not that comp, can u provide calibratin steps..? I did on Xbox (Controller), thought to did so, but it still accels and decels above any reasonable range + upon landin on runaway it reverses me on its own..
Hey you guys :) First of all thanks @320 Sim Pilot for your videos, they helped me more than once solving a problem. Today I installed the latest version of the Custom FBW. Setting up the dents for my Thrustmaster throttle quadrant works fine for the moment, but I’m not able to save the values by clicking ‘apply’ and ‘save’ and I have to do the configuration again and again before every flight. That’s somewhat annoying. Is this normal behavior or is there something wrong?
Hello, I am French and I speak English poorly. I have a question, do you know where I can find a tutorial to use the tablet correctly as well as to calibrate my TC Quadrant with it. We see it on your video but for me it is not explicit enough. Thank you in advance for your answer.
If i move the throttle full back, the lever in the sim is jumping back to idle position. impossible to calibrate the reverse thrust. All other positions working fine..... Thrustmaster Airbus Throttle Quadrant. I think my throttle quadrant is out of range for the sim. I calibrated the throttle as shown on the thrustmaster web page.... but nevertheless ... it's not working
Thx 4 this Video... saved my life :D But i hope u have the complete Set of Airbus Thrustmaster with Flaps ? My Question is, is there a fix that u can use the Auto Break Switch correctly for A320? For me, i can use Auto Break max only but thats it :( Maybe u can help me?
How did you get rain weather? are you using REX weather because MSFS default live weather does not produce rain even if the menu says thunderstorm. Totally bonkers live weather from Asobo.
Looks awesome. You mentioned changes in the Performance screen. Can you or anyone in comments please tell me where I now enter my DH &/or MDA? ....or am I in the wrong screen? Thx. Loving your videos. Learning so much. This is such an amazing aircraft to fly. Definitely my favourite!
Thanks fro the excellent tutorials and videos. I am using A32NX latest stable version. It´s a great mod and mfs2020 looks awesome and really great with the flight planning tool built in. I always like to do the ILS approaches, but a lot of the times when in approach phase the mcdu decides to suddenly by itself skip the waypoints in the list and select the runway as next waypoint. Also it seems althoguh I am at correct altitude it does´nt seem to "catch" the ILS, no indicators showing up on the display. I ave read others having the same problems, especially the "jump to runway bug" also in the default a320 meaning it is a bug in the mfs2020 software. Anyone else seen this? IS there a "trick" besides quickly try to program DIR waypoint? And for the ILS not "locking" someone said you can type in the ILS frequency manually in the RAD/NAV page, is that working?
@@i2icho Same for me. It has been nothing but problems for me using the TCA Airbus Quadrant. I'm about to return the throttle and side stick.. pissing me off lol
@@i2icho that didn’t work for me either. Idk what to do. My issue is with calibrating the throttle using the in game iPad.. the throttle doesn’t go to reverse at all. Truly sucks.
We and Those who started with FBW are the ones who saw their accomplishments these past months, they are creative from the first release they made, and they are quick to work, I respect them very much these heroes.
We will also see the flying giant A380 in the best future work. thnx sim pilot for you report.
You know it's a great mod when you start to feel guilty not having to pay for it. FBW is the ZiboMod of MSFS XD
Hopefully we can donate ;)
@@MrBadam972 You can :)
freeware but very professionally done 👍
There is a donation at the bottom of the website I'll be throwing in after I get paid Thursday
I dropped a 20 spot a few months back... it time for another soon... remember quality payware is around $80 for PMDG or maybe even $100?... we'll see at the end of the year when they roll out their new MSFS planes/jets... so yes 'free' is good but remember they are working for 'free' as well
Cant stress enough how great the FBW team are for what they are doing here with the A320 mod. AMAZING. :)
Good to note that around 5:11 BAT 1 has a discharge rate of about 4A. HOT BUS 1 uses a bit more power on the ground but later this goes down to about 1A for each of the hot buses. At this point in the video the batteries are not connected to the DC BAT BUS. A battery being connected to DC BAT BUS would result in a line being displayed between the battery and DC BAT BUS on the ECAM, and the battery's voltage on the overhead panel instantly displaying the voltage of whatever is charging it.
Always happy to see a notification from your channel!
That noise just before u turned the batteries on is actually one of the VHF knobs under the radio frequency switch it spins really fast for some reason, small bug I’m not sure they’ve noticed
This is absolutely fantastic, that you can calibrate throttle like this. I was scratching my head when i got new throttle 2 days ago on how to do it. This makes is very easy and i cant be happier.
Glad it helped!
Thank the maker! I was flying with a totally out of alignment throttle config for two weeks now. Was getting really pissed off, but the settings are just in game now, which is amazing, thanks!
As usual, your timely explanations of these updates makes the learning curve seem so much less challenging a climb! I finally installed the Airbus stick and throttle quadrant this weekend, and have been wondering if I was ever going to get the everything configured right. Up pops your video - problems solved. Many Thanks!!
I hope you turn up to work with that exact coffee cup, that would be great! And congratulations on the 40k. :)
Thank you! Maybe one day!
They just added this into the installer, just a heads up.
Quoting the announcement Tweet:
"We are happy to announce that a new experimental version is available in our new installer and that includes:
- custom fly-by-wire system
- custom autopilot system
- new engine model with autothrust system
- new Primary Flight Display (PFD)"
Brilliant, thank you!
Undocking the EFB to type in your SimBrief username is a very good tip, thanks!
Glad it helped! I got that tip from my viewers on previous streams!
Thank goodness I have my throttles back again! Thanks for the headsup
Started a flight in the A320NX while watching this video without reading the title properly :) Taxing to the runway i found out my throttle was off, during takeoff i found out it was way off! Atleast i now know the LVR ASYM message shows up in the PFD. :D
Thanks for the explanation! Especially the throttle setup. During test flight last time LVR CLB was flashing while throttle was in CLB mode and speed increasing. Don’t know why that happened…
It is possible they were nudged slightly too far forward. If this happens it will command above climb thrust and override the auto thrust! Hope this helps!
Navigraph integration to the EFB plzzzz.
Also just control c and control v for the copilot EFB as well. Keep up the great job guys!!
Woah! All this time I never knew about the preset manager in controller settings! This changes everything!!!
An alternative method (that I use) for inputting SimBrief username to the EFB: Write the username in another program (e.g. notepad), then simply copy and paste it into the EFB
You used the x-Plane 11 logo on your thumbnail :)
No WTF 😂
Are you gae????
Thanks for your very nice tutorials, and a Big Bravo and Thankyou, to the Flybywire A320 team!!!!!
I always have the spinning VHF knob at startup, its always makes me chuckle lol
The main issues that I can´t wait are MCDU alternate rte, missed approaches, assumed temp TO, Secondary FPL, Fix page and VNAV
Incredible attention to detail!
Great video again thanks - I like that you have you name on the Dashboard and the cup.
Super glad about this. I was extremely frustrated with the tca quadrant. I couldn’t get it to properly align and the flight stick was causing the plane to stall. But finally with this new update it’s all fixed except the autopilot. With this new update, my autopilot stopped working and idk what to do. 😩
The systems modelling is getting better and better as time goes along. But the MCDU, NAV, and VNAV systems need vast improvement. I know it's using MSFS' nav systems for the navigational capabilities, but yeah is this being worked on?
I preferred the previous settings. Now I move the throttle by one millimeter and the power goes up to 40%
I had that vhf "disco" knob... Look at him gooooo 😂
Nice to have some energy in the cockpit before a flight!
this was immensely helpful. Thank you
You're welcome!
Setting the throttles works perfect except for REVERSE doesn´t work for me. Any advise?
Thanks a lot for your great tutorials as usual very generous of you !
You are very welcome, thanks for watching!
Thank you for the update!
Great stuff. Many thanks.
excellent video - but when I setup my reverse thruster it jumps to +1.00 instead of -1.00 so it's going to TO GA when applying reverse thrust. (Thrustmaster Airbus Edition)
Great video, thank you. I can't get the FlyPad to do anything now, all I see is a "plane" on a white background, have tried with all 3 versions. Can't work it out as it used to work OK.
Thanks for the brilliant tutorial, where do I get the iPad add on please.
THX for this, I was going bonkers trying to get around that last fix and patch. my Thrustmaster basically has been a pain since getting because the changes come so fast on each side... MSFS and FBW... then we are left in the dark wondering why our throttles don't work... AGAIN...
Thank you, helped a lot! 👍🙂
You're welcome!
So there are three options when you go to the FLYBYWIRE installer. There are three choices of buttons, There is the LEFT option, the MIDDLE option, and the RIGHT hand-side option...... Which one are you choosing?
Does anyone else find the new side tablet too dark even with its brightness in settings turned up? I find it hard to read. Especially contrasted against the light from the window above. My version is a week old so maybe they improved it?
Do love this aircraft. Small question. Just picked up the rudder pedals to go with the airbus joystick and throttle. When taxing on the ground do you use the pedals or the joystick twist? I know in air it’s the pedals (and during takeoff and landing)
So the previous procedure to load fuel from Simbrief from within the MCDU is no longer in use? Also can we save the simbrief flightplan in the FMS by linking it to the EFB? I am a bit lost with all these options now :)
Great video like always. I wish to the stairs would stay until you decide to you don't want it anymore. But for some reason. Msfs does that. It should work just like the jetlag does.
Must be low priority on their things to do list.
i’ve never clicked so fast
Brilliant. Throttle issues solved
do us a favor a 'post a 'link' to you set up for throttle configurations from your file so we can try your set up... make it a PDF so it will just download and open maybe?
Love the videos and bookmarked as one of my favourites - well done !. I have tried for 2 days to make the throttle calibration work but to no avail. Could you, or someone else, be able to tell me how to clear the presets I have tried from the EFB calibration page so I can restart with a fresh sheet of paper ! Or perhaps guide me to the directory on the computer that is storing the files for these settings, Cheers . . .
Sr
320 Sim Piloto buenas noches desde Bogota , pregunta y ayuda cual MOD esta probando o utilizando. Gracias
After watching this video I'm sure I'll know what I'm doing :D Great video as always :)
loved the video thank you 😊
I have the same bug with the dancing VHF knob, glad it's just not me
When you request fuel from within the MCDU, does it still do it instantly or does it abide by the new fuel loading system?
I don’t know how to contact you otherwise, but I’m wondering if you would consider doing a video on hand flying a landing in the a A320NX... what do you do if the airport has no Nav aids or your AP is not cooperating? I’ve encountered a couple airports in South America where I’ve had to hand fly a landing and it’s been a real struggle. I also find that RNAV is unreliable and sometimes need to hand fly the decent. I find I’m fighting the AP even if I disengage it. :(
Are the fuel tank capacities modelled as per the plane? I have seen variations between MSFS versions and FBW versions being as much as 50% different. I searched on line and couldn't get the actual tank capacities.
Absolutely amazing!
Is it planned to straighten that tablet? (Or turn the camera on zoom)
Interesting idea, I suppose I could setup a camera view for it! Thanks for watching
I already get a DEV version, but there is no option to set a throttle as you did on ur video. Its just because of Experimental vers. ?
This post was released on march 26 and I still couldn't find a version that brings the screen to setup the throttle. Is there any specific one?
Thanks for the video
You're welcome!
Very informative, thanks. Question: With the new Experimental version the SPD, HDG and ALT are no longer in Managed mode after powering the plane and you can’t place them in Managed mode. It wasn’t like that in the previous Custom FBW. Is that how it is in the real A320 and can you explain?
Do you still need to use the custom throttle configuration settings when using the experimental version?
The throttle calibration needs work. It freezes for minutes at a time and the Set from Throttle is broken and does not display the accurate values with my Saitek Throttle Quad.
I dont have the calibrate button inside the flypad, but inside the dev version. what can i do to get the settings ?
My throttle leavers don't move at all with new update. Any suggestions please 🙏 if possible could you add a link in chat to download this model
Amazing video. Do we know if and when this aircraft will work on failures like the Fslabs A320 ?
Thanks for showing us these updates for the A320 FBW Mod - I'm loving every minute of it !
Glad you enjoy it!
For us who have standard version msfs and so not that comp, can u provide calibratin steps..? I did on Xbox (Controller), thought to did so, but it still accels and decels above any reasonable range + upon landin on runaway it reverses me on its own..
Do you have an updated video July 2021
Cant wait for the next CRJ stream
Does this need updating, as my FlyPad in throttle calibration mode doesn't look like this???
Is there a difference between the costum autopilot and costum flybywire version, or is he just using two designations for the same version of the mod?
my fly pad looking somehow different like urs and I have this option not like u
Hey you guys :)
First of all thanks @320 Sim Pilot for your videos, they helped me more than once solving a problem. Today I installed the latest version of the Custom FBW. Setting up the dents for my Thrustmaster throttle quadrant works fine for the moment, but I’m not able to save the values by clicking ‘apply’ and ‘save’ and I have to do the configuration again and again before every flight. That’s somewhat annoying. Is this normal behavior or is there something wrong?
One of my favorite aircrafts!
MyTCA airbus throttle will not go beyond CLB I'm using your setup experimental can you help me please
Hello, I am French and I speak English poorly. I have a question, do you know where I can find a tutorial to use the tablet correctly as well as to calibrate my TC Quadrant with it. We see it on your video but for me it is not explicit enough. Thank you in advance for your answer.
If i move the throttle full back, the lever in the sim is jumping back to idle position.
impossible to calibrate the reverse thrust.
All other positions working fine.....
Thrustmaster Airbus Throttle Quadrant.
I think my throttle quadrant is out of range for the sim.
I calibrated the throttle as shown on the thrustmaster web page.... but nevertheless ... it's not working
Thx 4 this Video... saved my life :D
But i hope u have the complete Set of Airbus Thrustmaster with Flaps ? My Question is, is there a fix that u can use the Auto Break Switch correctly for A320? For me, i can use Auto Break max only but thats it :( Maybe u can help me?
How did you get rain weather? are you using REX weather because MSFS default live weather does not produce rain even if the menu says thunderstorm. Totally bonkers live weather from Asobo.
Looks awesome. You mentioned changes in the Performance screen. Can you or anyone in comments please tell me where I now enter my DH &/or MDA? ....or am I in the wrong screen? Thx. Loving your videos. Learning so much. This is such an amazing aircraft to fly. Definitely my favourite!
On the right part of the performance screen after you activate the approach you’ll see BARO and RADIO. MDA use BARO, if DH use RADIO.
are you using any graphic mod? If yes tell me please what. Thats look beautiful
No! Just the A32NX mod!
Thanks fro the excellent tutorials and videos. I am using A32NX latest stable version. It´s a great mod and mfs2020 looks awesome and really great with the flight planning tool built in. I always like to do the ILS approaches, but a lot of the times when in approach phase the mcdu decides to suddenly by itself skip the waypoints in the list and select the runway as next waypoint. Also it seems althoguh I am at correct altitude it does´nt seem to "catch" the ILS, no indicators showing up on the display. I ave read others having the same problems, especially the "jump to runway bug" also in the default a320 meaning it is a bug in the mfs2020 software. Anyone else seen this? IS there a "trick" besides quickly try to program DIR waypoint? And for the ILS not "locking" someone said you can type in the ILS frequency manually in the RAD/NAV page, is that working?
Hey I'll have you know that Newcastle is one of the driest cities in the UK! 😜
I must be thinking of somewhere else!! Thanks for watching!
Might be bit of a dumb question, but where do you get that tablet from, and what do you use it for. Is there a good tutorial video?
Tablet is in the development of the mod and it has a map, ground services and more enhanced features
@@fssim6825 Ok, I will try it out, thanks.
Will this work with PILOT2ATC ?
nice coffee cup! wanted to ask, are you still flying in real life and if not when do you think you'll be back in the air again?
I get a black screen on the OFB.
Hi, great video. You have probably gotten this question a lot but what specs are you using :D
hey mate toga whats your value on setep
Like DCS world. Each plane should have its own control setup. Not the way msfs has it.
Autopilot stopped working ever since this update :(
Yes this broke my A/T and App not working now. Also dont have reversers on my throttle
@@i2icho Same for me. It has been nothing but problems for me using the TCA Airbus Quadrant. I'm about to return the throttle and side stick.. pissing me off lol
@@XxBrutalBradxX make sure you delete any other mods from your community folder i.e salty 747.. this is what my issue ended up being
@@i2icho that didn’t work for me either. Idk what to do. My issue is with calibrating the throttle using the in game iPad.. the throttle doesn’t go to reverse at all. Truly sucks.
@@XxBrutalBradxX follow the vid and manually put in the values on the flypad. Worked for me
Anyone else have no A/T with the development version?
What screen resolution are you using?
For the game or for the OBS?
@@dabneyoffermein595 I guess for both if they are different.
For the life of me I can't find this version on the discord? The link in the description doesn't work.
im having the same problem, the github is confusing
@@James_cooper_89 I've found it. It's pinned in the autoflight section although not all the features are available as per the video.
It was the throttle control I was after most
Yea found it but MCDU does not work
VHF1 wants to be turned up to 11 haha! 10:28
LIKE A LASER BEAM
Link is not working:(
Is this flybywire A320NX the actual one that comes with MSFS ? Or is it payware from a complete different company?
It is Freeware from a different company
@@fssim6825 Oh right, I didn't realise that. Where do you get extra liveries from? Or do they not do anymore yet?
Why is this mod not payware?
Its so good!
Why is x-plane 11 in the thumbnail?? Lol
Fixed now 🤣
Great spot, thank you. Fixed now!
Cool