Same issue with 2018 range rover envoque wiper motor is good used dielectric grease you recommended. Still not working but it works for the rear wipers any ideas ????
I have a 2011 Range Rover Spoer SC. The wipers only work on high. Low med and intermittent do not work. It also doesn't park the wipers, which led me to believe it was the motor. Motor has been replaced , still no resolve. Any ideas?
I changed my wiper motor changed my relay I even changed my wiper switch then I tried this trick and still nothing :( any ideas ? Also does it have to be that specific RR grease to work ? Or can I use permatex maybe that could be my problem
I was gonna also use some brand from autozone but figured to buy the original stuff since its not expensive. You will never know man. I would try the oem stuff first.
Oh it does have a bigger issue with the all terain control module. It disables due to a code trigers in the transfercase control module. There is a tsb about that code which could be caused by internal oil leak inside the transfercase.
Good job thanks for your best videos
Thanks Ben
Brilliant video, thanks for sharing the info its very good to know.
Thanks Hans
Great information thanks for sharing.
Thank you!
Thank you very much
My pleasure
Same issue with 2018 range rover envoque wiper motor is good used dielectric grease you recommended. Still not working but it works for the rear wipers any ideas ????
Maybe the switch is bad
@@DallasAutoDiag I replaced the switch but same results.
@@justinmullin7698 a technician has to diagnose it then.
Think it fixed my problem 😅
Classic mechanic overthinking, I was trying to test everything with the hood up the whole time lol opps
Thx
Thank you
عاشت ايدك Good god
Thanks
I have a 2011 Range Rover Spoer SC. The wipers only work on high. Low med and intermittent do not work. It also doesn't park the wipers, which led me to believe it was the motor. Motor has been replaced , still no resolve. Any ideas?
Did you watch this video? You probably have the same issue.
I changed my wiper motor changed my relay I even changed my wiper switch then I tried this trick and still nothing :( any ideas ?
Also does it have to be that specific RR grease to work ? Or can I use permatex maybe that could be my problem
I was gonna also use some brand from autozone but figured to buy the original stuff since its not expensive. You will never know man. I would try the oem stuff first.
@@DallasAutoDiag I spoke To RR and they send the generic stuff is fine but thanks
Hey I have the same problem but it’s not the switch and I checked all fuses and relays I have no signal coming from BCM what can look for on the BCM?
not sure what you mean
look like it oxidation problem .thanks
Not sure what was it. Pins looked clean. I think its poor design.
Oxidation is an issue without the lubricants…
It is.
Being a Land Rover, I’m surprised that was the only thing wrong with it 😂
Oh it does have a bigger issue with the all terain control module. It disables due to a code trigers in the transfercase control module. There is a tsb about that code which could be caused by internal oil leak inside the transfercase.
@@DallasAutoDiag Land Rover, the auto equivalent of cocaine.
@@VinceroAlpha 🤣🤣🤣
شبيه الماسحات
متشتغل
This is a Range Rover like a cavalier is a corvette.
yup