Thank goodness I watched this video I had two slats that just dropped...I made a homemade solution until I get the repair kit. Thank you so much for this video.
As I watched this video it was extremely helpful and informative, but missed one thing that both happened to me and I checked, and found my problem. The vanes were turned (inward) so I reversed them and everything worked perfectly! Thank you again.
Wow, Thank you so much; I have lost the blinds instruction manual and I am having minor troubles with one of the clips not closing properly. I'm guess I need to replace it. this helped me figure that out. I had just watched a video about replacing that one clip, then saw your video about the rest of the blinds. again, thank you.
Is it possible to repair the string that draws open the slats from left to right? The slats still turn but they no longer open from left to right because the string seems to have come off its track. The string will pull the tracks to the left but to push them back to the right you have to do this by hand.
I have fabric slats with iron weight piece at bottom. Our slats are not easy to come out from the plastic hook up there and many of these clips are split and broken. You did not mention anything about the clips. Can you please tell what to do if the plastic hooks engaging the slats are broke open.
Excellent and well stated video; however, my problem is my blinds won’t slide past one point. I’ve examined the cords and clips. I can’t find a problem. Still a great and instructional video for repairs.
I have a broken wand mechanism on vertical blinds but the blinds split in the middle and the wand mechanism is in the middle not on the end. Can this be replaced and if so how?
I made a mistake of spraying down the rail with WD-40 and now I’m having an issue sliding it back-and-forth. What is the correct way to lubricate the rail? I’ve used multiple lubricants running it down the rail and it leaks all down the blinds and on the floor. I’m using blaster silicone lubricant.
So today if you can answer this, I have a wand mechanism. I turned it and it made a little pop sound and now it just turns and turns either way and the blinds don't open. Can this be fixed?
Thank you for this great video! Question: Are wand controls better or is the cord/chain control better? I've had wands break off over time and I've had to replace the entire headrail.
✨Hi , i have a Question . What to do . I have a couple of the ‘Vertical Blinds Clips ‘ that attach to the ‘Slats that broke . Any repair for this . Thanks !!!✨
What can be done if the blinds only retract on one side? They rotate fine. But when I pull the cord to move the slats to the sides (they open from the middle and collect on each side), only one side retracts. The other I have to move by hand. Is there a way to “restring” this?
Thank u. I was able to fix 1 of them. On my other blinds its closed but still let's light in. Idk if I lean to the side I can see outside. I tried to tighten but maybe there just getting old
Hey there, I'm having another issue with my blinds. When I try to turn the wand to let partial light in it only opens about 10% and never anymore, very frustrating. My only option is to completely pull the whole blind open but then everyone can see inside. Do you have a fix or do I need new blinds please?
I didn’t know I had to open the blinds before drawing them back. Now they are stuck halfway, and won’t move in either direction.What can I do to avoid breaking them? Update: I used a long screwdriver as leverage to separate and move the hooks so the panels are back where they belong. So I’m good, but my runners must need lubricating or something. Because when the slats are open, and I try to dray them back, they don’t move very well. I don’t want to pull the cord to force them. What should I do? Thank you.
I see that PJ never answered my query? I also see that PJ does not bother to answer many of the viewers who need assistance. So no subscription. If you got a similar problem of a stuck pull cord (that's to open and close entire vertical) i was advised to take down parts as shown and see about any broken parts; if all parts are okay, clean and lubricate rail or track and see if that works out. However, before you put it up test the track for motion, if not, order a new part. Whoever invented these verticals was a real, complicated, genius.
My problem is that the bottom of the slats have weights in them and over the years the glue that makes the channel for the weights has come unglued the weights have fallen out. How do I fix this? Do I need the weights? I notice in the video that there are no weights.
I have an 8 foot valence on 5 clips that always has a warp in it. Tried 2 people pulling at either end...didn't work. Anyone have a solution? Clips and brackets all appear to be in straight. Maybe the wall isn't perfectly straight?
Exactly the video I was looking for... Straight talk... No wasted minutes... Thanks a lot
P & J Custom Window Coverings
Thank you! This was informative, precise, and what I needed to properly remove the vanes for cleaning.
Thank you and your family young man God bless you and your family blessings.
Thank you. This looks easy. I haven’t done anything yet but I will tomorrow. This is so helpful.
Thank goodness I watched this video I had two slats that just dropped...I made a homemade solution until I get the repair kit. Thank you so much for this video.
this is actually a very good video. clear instructions no mumbo jumbo
Thank-you! Thanks to yourself and your video I figured out how to fix my curtains !!
You just saved me further frustration demonstrating how to remove a slat! Thank you.😊
Can you please tell how to get replacement clips to attach clips to the rail thank you
As I watched this video it was extremely helpful and informative, but missed one thing that both happened to me and I checked, and found my problem. The vanes were turned (inward) so I reversed them and everything worked perfectly! Thank you again.
This was not helpful at all.
Straight talk! Very informative, well-done video. Just what the window-doctor ordered! Thanks!
Clip was pushed up and can't pull down to attach blind
Wow, Thank you so much; I have lost the blinds instruction manual and I am having minor troubles with one of the clips not closing properly. I'm guess I need to replace it. this helped me figure that out. I had just watched a video about replacing that one clip, then saw your video about the rest of the blinds. again, thank you.
THANK YOU very MUCH for the info. I was able to fix my blinds in about 15 minutes. You Rock P&J dude
Can the clip an individual slat hangs from be replaced?
Thank you for all these tips!
Thank you ! I was able to salavge my blinds using the tips in this video. They are soo brittle!
Thanks for this! It told me exactly what I needed to know!
Is it possible to repair the string that draws open the slats from left to right? The slats still turn but they no longer open from left to right because the string seems to have come off its track. The string will pull the tracks to the left but to push them back to the right you have to do this by hand.
Did anybody get back to you with a reply? I have that problem too.
Very clear and sufficient explanation. Thanks.
You missed a common problem of how to repair broken clips.
Please, how do you replace a clip
What about clips slats attach to, how do you race those?
you are the man thats fast now I know thanks a bunch
On the ball Kid, appreciate the vid🇮🇪👍🏼
Your video was so easy to follow ,answered all my questions while saving me time and money. Thank you❤
Can an individual clip be replaced ?
I have fabric slats with iron weight piece at bottom. Our slats are not easy to come out from the plastic hook up there and many of these clips are split and broken. You did not mention anything about the clips. Can you please tell what to do if the plastic hooks engaging the slats are broke open.
Excellent and well stated video; however, my problem is my blinds won’t slide past one point. I’ve examined the cords and clips. I can’t find a problem. Still a great and instructional video for repairs.
I was hoping you were going to talk about everything repairing like the little clip up in the top that holds the line
Very informative & simple to understand explanations. Thank you
very informative could you talk about how to connect the stick for turning to the blind appreciated
This was a very helpful video. Thank you so much!
Good video, but how do I simply replace the broken plastic clips the verticals hang on?
Came here to say the same thing
Where I can get vertical holder clip if it broken?
Great information! Helpful…
Simple to understand. Well done, thank you.
Excellent explanation. Thank you.
How do you measure to replace? Go by the individual blind length? I want to replace the unit that pops out. The casing is fine. I want all new blinds.
Can you repair the clip?
Thanks. Fantastic description
Mine.dont have strings to close or open or a wand. Does this mean I should just get rid of them?
Are all the parts on vertical blinds standardized?
Thank you, getting new windows installed.
Very well explained in layman terms.
Excellent explanation and demonstration
Thank you so much I have a screen glass window that I’m thinking about installing vertical bl
You make it look so easy. I must not have the magic touch, lol
Good video. But you didn't mention replacing a broken stem (which is what I need)? Thanks!
Didn't cover misaligned slats...
One clip is the issue and I don't want to twist it and make a bigger problem.
Excellent Presentation.
Very good video...thank you
Ok so my slats do not come off like that. They have a different attachment at the top. There is a top piece over the whole. Can I still replace them?
I learned a lot , great video.
Good informative video no un-packaging or cats. Need info on no turn slats. parts?
so the clip that holds the bling strip breaks off you need to throw whole blinds out? Cant be fixed?
I have a broken wand mechanism on vertical blinds but the blinds split in the middle and the wand mechanism is in the middle not on the end. Can this be replaced and if so how?
The exact problem I was having!!! Thank you
I made a mistake of spraying down the rail with WD-40 and now I’m having an issue sliding it back-and-forth. What is the correct way to lubricate the rail? I’ve used multiple lubricants running it down the rail and it leaks all down the blinds and on the floor.
I’m using blaster silicone lubricant.
If a carrier stem gets twisted so the blind doesn't like up with the others....is there a simple way to reposition the carrier stem? Thanks!
So today if you can answer this, I have a wand mechanism. I turned it and it made a little pop sound and now it just turns and turns either way and the blinds don't open. Can this be fixed?
Thank you for this great video! Question: Are wand controls better or is the cord/chain control better? I've had wands break off over time and I've had to replace the entire headrail.
What if the clip is way too open so the blinds can’t snap back?
✨Hi , i have a Question . What to do . I have a couple of the ‘Vertical Blinds Clips ‘ that attach to the ‘Slats that broke . Any repair for this . Thanks !!!✨
Thanks for this video. It gave me the knowledge I needed to disassemble the blind to make a repair.
Thanks PJ! 👍
What can be done if the blinds only retract on one side? They rotate fine. But when I pull the cord to move the slats to the sides (they open from the middle and collect on each side), only one side retracts. The other I have to move by hand. Is there a way to “restring” this?
Thank u. I was able to fix 1 of them. On my other blinds its closed but still let's light in. Idk if I lean to the side I can see outside. I tried to tighten but maybe there just getting old
I need to see the repair up close and what you use to connsct the blind. Send me a link on how to do the repair.
HOW CAN I REPLACE OR FIX THE CLIP AREA WHEN IT'S TO CLOSE TO THE WAND TO BUT A NEW CLIP IN I CANT SEEM TO FORCE A NJEW CLIP BACK IN
Is there a fix for the bottom clips mine are broken..
One of the clips that the slat clicks into is broken on my verticals. That wasn't covered in the video. ?????
Great upload thank you .. Now I know I'm screwed & I need to replace the damaged units lol
Do you not hear the gripping sound in the turning mechanism/chain?
.thats what I need help with - on an internal mount installation…
Hey there, I'm having another issue with my blinds. When I try to turn the wand to let partial light in it only opens about 10% and never anymore, very frustrating. My only option is to completely pull the whole blind open but then everyone can see inside. Do you have a fix or do I need new blinds please?
I didn’t know I had to open the blinds before drawing them back. Now they are stuck halfway, and won’t move in either direction.What can I do to avoid breaking them? Update: I used a long screwdriver as leverage to separate and move the hooks so the panels are back where they belong. So I’m good, but my runners must need lubricating or something. Because when the slats are open, and I try to dray them back, they don’t move very well. I don’t want to pull the cord to force them. What should I do? Thank you.
How do you replace a clip in the head rail that has broken?
Helpful vid. Thanks!
How can I buy a vertical patch?
You covered everything but the adjustment rod. Mine spins but won't turn the blinds...
Do you still sell the repair parts to glue on? I couldn't find it on your website
Very helpful! Thank you!
Hello, when can I buy the repair kit?
I have individual vertical pieces sliding left and right not staying in place like it’s supposed to. Any fix for that?
How can I tell if the gear is broken? Mine doesn’t appear broken but it’s not catching on to the rod 🤔
So my problem is my chain is totally uneven and can no longer open the slates to open. Is there a way to readjust the chain?
I have the same problem, and clearly, no one manages this channel :(
What if you have binding in the rope in the far left.
P&J do you have a video on string vertical (same as video one) that is stuck and how to fix. Thanks.
I see that PJ never answered my query? I also see that PJ does not bother to answer many of the viewers who need assistance. So no subscription. If you got a similar problem of a stuck pull cord (that's to open and close entire vertical) i was advised to take down parts as shown and see about any broken parts; if all parts are okay, clean and lubricate rail or track and see if that works out. However, before you put it up test the track for motion, if not, order a new part. Whoever invented these verticals was a real, complicated, genius.
@@Montery12😊
How do you take of the slat
When I ordered my vertical blinds, I ordered extra vertical slats so if one 1were damaged or broken, I could just swap it out.
Wow thank you for making that I’d love to know what your company is. So I can order from you.
What’s the balancer for? Aesthetics?
My problem is that the bottom of the slats have weights in them and over the years the glue that makes the channel for the weights has come unglued the weights have fallen out. How do I fix this? Do I need the weights? I notice in the video that there are no weights.
where can you buy the vertical head rail?
You guy is greatbthanks
Good video, thank you. My problem is broken clips that hold the blinds.
Good video man
Very helpful!
I have an 8 foot valence on 5 clips that always has a warp in it. Tried 2 people pulling at either end...didn't work. Anyone have a solution? Clips and brackets all appear to be in straight. Maybe the wall isn't perfectly straight?
Not seeing fix for when the pull cord breaks? Can we fix that?
do you sell plastic stems?????????????
how to change the orientation of the headrail..my windows open to the right and the curtain opens to the left.
What if one of the holders of the blinds breaks, do I need to take it all down to replace?
What about when some of the clips don’t spin.
Thank you