Sponsor & Any Good Stuff 影片裡的好東西在下方連結 Go check out 4UAD new Arrival !! 【4UAD 相關商品在下方連結↓↓↓】 store.4uadsmartairsoft.com/ Special Thanks: ➤ GHK Glock 17 Gen5 here : samoon.com.tw/ ➤ACETECH: you guys do make some amazing Grenades and Tracers Amazing Grenades : amzn.to/3EFsI2W Bifrost Tracers : amzn.to/3us9Xhs Official Web: www.acetk.com/ ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
Ive been using 4UAD Products in my customer builds, and im a big fan of your lubricating pens and buckings. You guys make us airsoft tech shots very happy!
I have to say, now that I have both the Gen 3 and this Gen 5 MOS version, I feel Gen 3 was more sturdy. I purchased mine with a steel slide and outer barrel, and adaptor plates. However, the steel slide seems noticeably lighter than the Gen 3. There is also a lot of play between the slide and frame. The rails on the Gen. 3 and steel slide were a lot tighter (better tolerance?). The recoil spring assembly is a lot weaker than the Gen 3 and the Gen 5 hop up unit seems cheaper than the old version. I have a steel barrel lock, 4UAD bucking and hop up unit preordered so I hope it'll be better. The mushy trigger is lighter but like your video illustrated, it has a lot of slack, so I will probably have to get the upgraded trigger. Interesting to note is the slide rails match the real steel so I'm able to use a real steel MGW sight adjustment tool on this airsoft model. However, I believe the dimensions are still a bit off because the AmeriGlo rear sight I put on has a noticeable gap between the slide and the metal rear sight even after tightening the sight with the included screw. The polymer frame also looks a bit rough and the bottom of the flaired magwell has sharp edges and when I tried to install real interchangeable grips, they didn't fit. The grip angle is slightly different than the real one 🤷♂️. The flaired magwell is also more square-ish and not as rounded as the real one. Lastly, the adapter plates are a cool idea but the included screws are extremely small and I almost stripped one of them trying to install the #2 sight plate. I have a Holosun SCS but I realized I can't mount it because the sight doesn't require a sight plate and screws directly onto the slide. Unfortunately, to maximize the efficiency of the gas nozzle, the MOS plate once removed, shows a slide that isn't flush, so I can't mount the sight. FYI, the size and thread of the MOS plate screws are not the same as the real steel ones. All in all, I think the Gen 3 is better quality and it's cheaper than this MOS version. I'd recommend waiting to purchase this after a few more batches have been made. I noticed the newer Gen 3 polymer frames have slight changes than the original ones that first came out. For example, you can see the difference in the front set of slide rails from the original batch to the ones being made now. The polymer also looks rough and not rounded and smooth on the inside around the recoil assembly area, unlike the Gen 3. I think this will all get better over time, so this might just be because it's a new item with a new mold.
@@4UADSmartAirsoftThanks! Question: does your steel recoil spring feel weaker than the one on the Gen.3 and does your Gen.5 have a lot of play between the slide and rails? My slide sometimes doesn't reset fully to the forward position.
I have gen 3, Samoon Co2 kit installed, I dry fried a lot and the trigger have become so weak to open the co2 mag valve, hope this trigger could fix it
Why use old v 1 tension arm?? Just change pin in the v2 tension arm spring to a longer pin. Reducing the rolling break and premature valve knocker movement.
You guys reply to comments a lot, hoping you reply to mine. I wish to acquire the most impactful Glock in the market, recoil wise, doesn't matter the cost nor the generation. What do you recommend? GHK Gen 3 with Steel Slide + Upgrade kit for CO2? Or GHK Gen 5 + Steel Slide (Is this even for sale anywhere?) + Upgrade kit for CO2 (Which I guess would be the Steel Slide + the package of upgrade parts shown in this video?)? The Gen 5 is new and thus, information on upgrade parts, and comparisons to gen 3, is hard to come by. Props for the amazing videos! Hope I'm able to support you guys soon by buying your upgrade products : )
Hey guys, love the content. Quick question: I have a gen 3 ghk, and I need a trigger upgrade. I know that there is already a samoon improved trigger out there (I think it's that silver sear shape that was changed), so I'm wondering if you guys are using the old sear, the samoon improved one, or a completely new one. Thanks!
@@4UADSmartAirsoftman, the Volante carrier took me 15 months 😂 finallly will get it by next Monday, I really don’t mind if you wanna try/test it coz I love ur videos a lot. BTW I’m in Taipei
@@4UADSmartAirsoft Gotcha! I placed a preorder with Samoon before I got round asking about it here. I'm gonna try to add a gen3-barrel to the order. Cheers for the reply 🫡
Sponsor & Any Good Stuff
影片裡的好東西在下方連結
Go check out 4UAD new Arrival !!
【4UAD 相關商品在下方連結↓↓↓】
store.4uadsmartairsoft.com/
Special Thanks:
➤ GHK Glock 17 Gen5 here : samoon.com.tw/
➤ACETECH: you guys do make some amazing Grenades and Tracers
Amazing Grenades : amzn.to/3EFsI2W
Bifrost Tracers : amzn.to/3us9Xhs
Official Web: www.acetk.com/
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
跟 Dcg Ghk 合作推出金色扳机，造福我们动手能力差的玩家！
Now I want a GHK glock 😍
Broooo. I just found out your hop rubbers are available here in the Philippines! Imma get one for my ugly hi capa frankenstein lmao.
我要鋼slide!!!要trigger!!!要hopup座!!!要螺絲膠!!!要油!!!。。。幹，我全都要！！！😭😭😭
來吧來吧XDD 等我們一下
剛剛買到鋼slide, 外管和slide彈弓組了，就欠你的trigger管hopup座了，敲碗快來香港❤❤❤❤
@@4UADSmartAirsoft 買到啦買到啦, 全家桶都已經買到了!!!!剛全換上了😍😍😍😍好讚, 終於解決了偷步問題了!!!!!
Ive been using 4UAD Products in my customer builds, and im a big fan of your lubricating pens and buckings. You guys make us airsoft tech shots very happy!
Thanks man that really means quite a bit to us! We will keep them coming to you guys
Thank you for making this video. Never own one but i certainly enjoy seeing you do this video. 👍🏾
It was fun and thanks for the like!
剛好解決了GHK系統兩大缺點，hop和氣閥撞針偷步。有機會拍一下新扳機組不同扣壓力度對初速的影響嗎，我之前實測一個彈匣内初速能從50到90浮動，是扣扳機力度導致的，這個主要就是扳機和火控組共同導致的
沒問題的正在拍攝細部講解和評測的部分
該花兩組的錢了❤❤
哈哈哈哈準備好荷包君
太棒了！剛買的槍 就可以現學知識。
希望能幫到大家
an absolute banger of a build ❤
Thanks man! Glad you like it
謝謝你的分享與介紹❤讚👍
沒問題的!
4:15 希望你們也能後出後面這塊蓋子的改裝品，最好又潮又騷的樣式
That grease pen case is snazzy!
Lol it was a fun project haha
Doing airsoft black magic again 😱
LET'S GOOO, HE IS BACK
lets go!
Cant wait!!!
Okay…. Now I’m considering buying a GHK GLOCK.
There is a solution
買爆🎉
多遠 目前測試？
Waiting all of the parts day21🥲
its on the way, sorry for the long wait its almost done QAQ
@@4UADSmartAirsoft23Days
Everyday EveryNight 廣華街🙂↔️🙂↕️🙂↔️
Per~~~fect !
我觉得ghk的锤框也需要升级成钢制的，现在塑胶的在击发一定的次数后会有非常大的磨损，毕竟扳机连杆是直接摩擦那个框的。
這個感覺可以初個套件XD
我從來沒想過Airsoft的影片可以放著當讀書配樂
讀完就可以買槍了
Oh I'm coping this next pay check
Lets go!
很療癒
需要療育一下
我的Gen 3也期待這組扳機
等我們一下快好了
I have to say, now that I have both the Gen 3 and this Gen 5 MOS version, I feel Gen 3 was more sturdy. I purchased mine with a steel slide and outer barrel, and adaptor plates. However, the steel slide seems noticeably lighter than the Gen 3. There is also a lot of play between the slide and frame. The rails on the Gen. 3 and steel slide were a lot tighter (better tolerance?). The recoil spring assembly is a lot weaker than the Gen 3 and the Gen 5 hop up unit seems cheaper than the old version. I have a steel barrel lock, 4UAD bucking and hop up unit preordered so I hope it'll be better. The mushy trigger is lighter but like your video illustrated, it has a lot of slack, so I will probably have to get the upgraded trigger.
Interesting to note is the slide rails match the real steel so I'm able to use a real steel MGW sight adjustment tool on this airsoft model. However, I believe the dimensions are still a bit off because the AmeriGlo rear sight I put on has a noticeable gap between the slide and the metal rear sight even after tightening the sight with the included screw.
The polymer frame also looks a bit rough and the bottom of the flaired magwell has sharp edges and when I tried to install real interchangeable grips, they didn't fit. The grip angle is slightly different than the real one 🤷♂️. The flaired magwell is also more square-ish and not as rounded as the real one.
Lastly, the adapter plates are a cool idea but the included screws are extremely small and I almost stripped one of them trying to install the #2 sight plate. I have a Holosun SCS but I realized I can't mount it because the sight doesn't require a sight plate and screws directly onto the slide. Unfortunately, to maximize the efficiency of the gas nozzle, the MOS plate once removed, shows a slide that isn't flush, so I can't mount the sight. FYI, the size and thread of the MOS plate screws are not the same as the real steel ones.
All in all, I think the Gen 3 is better quality and it's cheaper than this MOS version. I'd recommend waiting to purchase this after a few more batches have been made. I noticed the newer Gen 3 polymer frames have slight changes than the original ones that first came out. For example, you can see the difference in the front set of slide rails from the original batch to the ones being made now. The polymer also looks rough and not rounded and smooth on the inside around the recoil assembly area, unlike the Gen 3. I think this will all get better over time, so this might just be because it's a new item with a new mold.
Now this is some valuable comment :DDD Thanks the info man
@@4UADSmartAirsoftThanks! Question: does your steel recoil spring feel weaker than the one on the Gen.3 and does your Gen.5 have a lot of play between the slide and rails? My slide sometimes doesn't reset fully to the forward position.
Ordered your hop unit today from Samoon. Waiting for trigger to be available
Thanks for the wait man! Really appreciated!
How much in total? the pistol and the upgraded kit combined.
Is the upgrade is available in all glock gbb guns? Planning to have the same upgrade with my WE Glock34. Thanks team 4UAD
only the trigger will work, the hop won't
B E A Utiful.
Let’s go
今天早上才買了這支glock 現在就看到補品了 希望快點到達香港 速到速買
8/20發貨等我們
@@4UADSmartAirsoft 如果8/20等不到 我去跳樓了😂😂
Can you make a new trigger that looks like original stock trigger. I like the utilitarian look of glocks and feel fancy parts ruin that aesthetic
hummmm wonder who will buy it XD
扳機很漂亮 雖然價格稍高但還是會想改
Hey Guys, when is the pre-order going live on your site? Cheers 👌🔥
By the end of this month :)
I have gen 3, Samoon Co2 kit installed, I dry fried a lot and the trigger have become so weak to open the co2 mag valve, hope this trigger could fix it
It will! The problem is caused by the spring, when the spring gets old all kinds of problems starts to occur
Please, also make the MOS plates in steel. The standard ones are very soft material and easy to strip.
Let me put that to our list
And please please make a holosun k-footprint plate!
Why use old v 1 tension arm?? Just change pin in the v2 tension arm spring to a longer pin. Reducing the rolling break and premature valve knocker movement.
Yep and we switch that in the last moment
👍.
Ambiance musicale top🤙
A love story
Indeed
You guys reply to comments a lot, hoping you reply to mine.
I wish to acquire the most impactful Glock in the market, recoil wise, doesn't matter the cost nor the generation.
What do you recommend?
GHK Gen 3 with Steel Slide + Upgrade kit for CO2?
Or GHK Gen 5 + Steel Slide (Is this even for sale anywhere?) + Upgrade kit for CO2 (Which I guess would be the Steel Slide + the package of upgrade parts shown in this video?)?
The Gen 5 is new and thus, information on upgrade parts, and comparisons to gen 3, is hard to come by.
Props for the amazing videos! Hope I'm able to support you guys soon by buying your upgrade products : )
once you get the Co2 mag gen 3 and gen5 feels roughly the same, but with RMR it kicks even harder since its heavier
Fantastic I’ll be purchasing!
Great video! Could it be possible to get a rough idea as to what would be the benefits of installing this lovely looking aftermarket trigger?
easier trigger pull, and adjustable travel, better look
Hey guys, love the content. Quick question: I have a gen 3 ghk, and I need a trigger upgrade. I know that there is already a samoon improved trigger out there (I think it's that silver sear shape that was changed), so I'm wondering if you guys are using the old sear, the samoon improved one, or a completely new one. Thanks!
The improved one eventually
Nice 'ballistic curve'
Lol he’ll yah hahah
My wallet is ready
We will be ready for you!
Can somebody make a glock 19 slide and frame for GHK please 😫 How many years we gotta wait
do u guys take order and do shipment fully assembly
i dont have enough knowledge for upgrading
sorry man we are really short on hands
@@4UADSmartAirsoft ah unlucky then can u guys do glock x23 i guess it was like i am bas with names
我喜歡BGM
需要舒服
What steel slide is that? Are you guys making a steel slide for the glock gen 5?
nope that is from battleforged
whats that electric crew drill?
Need that hop unit
Another one.
Is Ghk Glock 17 gen 5 steel version customized by Samoon’s recoil stronger compared to the Ghk Glock 17 gen3 ?
They kicked equally hard
jimmy沒了~ 貓也沒了~
貓咪帶去廠房應該會嚇瘋哈哈哈
@@4UADSmartAirsoft 是因為廠房有別的人?(69小隊)
Friction Pro rubber do have the tendencies to make the bbs fly low then back up, i wonder why
its the shooting angle and the filming angle
Could you do a recoil comparison between the GHK M4 DD PDW and the Marui M4 with the Volante 20mm steel bolt carrier? （I can lend you for testing)
That might take a little to long we will buy the carrier if we can
@@4UADSmartAirsoftman, the Volante carrier took me 15 months 😂
finallly will get it by next Monday, I really don’t mind if you wanna try/test it coz I love ur videos a lot. BTW I’m in Taipei
I need one of those oil dispensers.
What steel slides that? I've got the gen 3 and my gen 5 arrived today
Sweeet man the slide came from a brand call battleforged
А кто производитель стального затвора и стального ствола?
GHK the best🔥
It’s a workshop called battleforge armament
請問內管也是換改裝的精密管嗎？是什麼品牌的？長度97mm?謝謝
還有這些開賣了嗎（重點）！
內管是gen3 的原廠管喔
Will your custom flag trigger work on the VFC glocks?
Yes sir it fits
12:51 Which company is the Inner Barrel that was installed with the hop-up chamber? We're running out of Inner Barrel information
Oh that’s actually stock barrel from a gen 3
You just sold a lot of GHK Glocks sir!
Thanks man that mean quite a lot to us
like like like
wonder if I real trigger group and slide would fit.
I wonder too lol
Hop-Up座 KRYTAC Maxim 9 適用嗎?
我還在等那個10萬點閱~
哈哈哈哈應該是等不到了XD Hop座確定不通用XDD
Will you release some upgrade sig air m17??
Will this triangle trigger work on the glock17 gen 3 version??! I wanted to put it on the DSG GHK G34 TTI
@@miko3350 Yes, it’s working on the Gen 3/5 and also on the VFC Glock!!!
@@Sixmmcustom Wow! how did you know this information?
@@miko3350 From 4UAD Airsoft;-)
😍😍😍
Does the steel slide is custom made? Or it was officially made by GHK?
Batttleforged
Great job! Are the triggers compatible with gen3 or is there any chance that you will release trigger for gen3 as well? Thx
This one works on gen 3 :)
@@4UADSmartAirsoft amazing, so now I can't wait! When it will be possible to order it?
Nice video guys. I have two questions:
1- is the hopup chamber also compatible with GHK gen 3 glock?
2- is the steel slide made by 4uantum?
Probably no to both, but definitely no to number 2!
@@keyboardcommando5146 thank you!
1. Nope but the trigger is
2. Steel Slide is made by battleforged
所以換這個HOP座+HOP皮按照影片述說是需要換管的對吧，原廠的不夠長是嗎？可以請問管要換多長的嗎？
其實是原廠管子和皮是特規要搭一起,但座一樣可以裝的
all these upgrade parts, is it only for ghk g17 gen 5??? I myself am using a vfc 19x.... can i install in it???
The trigger works haha
@@4UADSmartAirsoft can the trigger also be installed on ghk Gen3 ?
which inner barrel works with the hop-up chamber?
Marui Spec
Do you know the size of the rmr plate screws? I only got 2 in the box.
M3
請問鋼滑套如何購買，會有成槍？
The Hopup unit and trigger fits also gen 3?
Only the trigger not the hop
How to order that kind of unit
Check out our website
SHUT UP AND TAKE MY MONEY !!!
Is that steel slide aftermarket? Or does it come with the GBB PIstol?
Aftermarket
Aftermarket
fps? thanks
where can i pre order 🤔🤔🤔
這扳機能支援 DCG-GHK-TTI-G34-MOS 嗎?
這禮拜天看片
可以出款竞技滑套
比賽專用!!!
Trigger 几时发售，一定买
8/20
一套共要多少錢?
How much if you do all this upgrades plus the ghk g17 gen 5. ?😊
Gonna cost a bit haha
这次的gen5 mos通真铁规格吗 真品 螺丝直接上吗
要看ㄝ每家都不一樣
請問您們的hop座能原廠管嗎、還是兼容什麼管謝謝
原廠還是可以裝喔那段主要是要表示原廠管小特規
Is Steel Slide a BFA product?
you know too much😏
Can this upgrade be use on WE brand?
The trigger yes! The Hop up nope
12:42 請問這裡是表示 Gen 5 的內管長度與 Gen 3 不同嗎？不是 97mm 了？
差不多長不過就是規格不是正馬牌要注意
請問會推出全升級的成槍嗎？
目前沒規劃ㄝ可能要購買DLC 了
Is the barrel threaded?
Nope
Is the bucking compatible with the gen 5 inner barrel?
not the best since the inner barrel is proprietary
@@4UADSmartAirsoft Gotcha! I placed a preorder with Samoon before I got round asking about it here. I'm gonna try to add a gen3-barrel to the order. Cheers for the reply 🫡
Does it have the same kick as the gen 3?
With Rmr it kicks harder
Does your new trigger change the pull weight significantly?
its not going to make it Tokyo marui
@@4UADSmartAirsoft but does it make it less GHK?
What c02 magazines where those ???
GHK Co2 mag
本来想问问考不考虑入驻哔哩哔哩，想了想好像大概也许应该8行😂
只要有放連結得話歡迎搬運喔XD 我們給搬
@@4UADSmartAirsoft 已经有人在搬辣
請問更換的槍管也有在賣場嗎？
槍管找一般改裝槍款即可
請問是不是BHM的upper?