ALZRC 380 DEVIL Mini review.

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 102

  • @torontorc4637
    @torontorc4637 5 років тому +1

    That's a nice looking helicopter man, thanks for sharing!!

  • @jimmeehan5501
    @jimmeehan5501 5 років тому +1

    hey, nice job! I'm in the same boat! i had a walkera v400d02 and a few blade 230Ss, I bought a 380 and my friend put it together. i was the last guy to get the silver iron man canopy!! I'm just like you, I'm afraid to fly it. I've flew it 5 or 6 times..just hovering, not even turning it, it is so smooth, it's beautiful! hopefully by the end of the summer i will be flying that thing all over the place. i live on long island ny, ill send you a pic.

    • @jimmeehan5501
      @jimmeehan5501 5 років тому

      can't figure out how to post a pic, get back to me, ty! my name is Jim

  • @keithwhyte4750
    @keithwhyte4750 3 роки тому +1

    EEEEEEEEEEESSSSSSSSSSCCCCCCCCCC!!!!!!!!!!!!!! jeeeeeeeeeeeeezzzzzzzz!

  • @dirtcurt1
    @dirtcurt1 7 років тому +1

    Well I can tell you I have both 380s, and I am running the gold vbar clone on the ALZR. I replaced the tail blades because of a vibration. So far over 200 flights and no issues. I am running at 80% power and had to de-tune controls to make it smooth. It will loop inside of it's overall length with no pitch change. It took forever for me to figure out the reducing controls to make it fly well. The goblin frame is thinner and it has better blades. The ALZR motor runs cool. The battery system is so easy to change batteries which are the same on the two copters. The ALZR is so worth the money. And it is so fast in forward flight it's hard to keep up with. The Gold Vbar clone feels a bit rubbery when you stop hard in pitch, and high speed level flight gets a bit pitch sensitive. But it overall really works well.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      dirtcurt1 could you please help me. I want to swap out my Tgz-380 for a K-bar Yellow mini not the gold warrior I see they're
      both extremely popular but
      excruciatingly painful and difficult
      to program by either computer
      or bluettooth phone I have the app. I wanna know how to set the blade travel for 12degrees negative and positive how to
      program rate mode and heading
      hold. When I got to set up and
      begin the process of programming everything and I finished, some of the savings well don't save and return to factory defaults. This is Very frustrating
      especially the Blue K-bar for which nothing saves and when you press finish everything returns to factory settings
      which is a no no. I love
      the K-bar they are cheap effective
      and like I said popular almost everyone seems to own one. I own 5 of them 3 blue 2 yellow. Yet I can't seem to find a video that can properly teach me how to setup my 380 Devil.Yikesss.
      I have given up and went to the
      BeastX Clone which is Mediocre
      at best when K-bar is light years ahead of the Tgz-380 or clone.
      Please help me. Anyone have any suggestions? Thanks P.J.

  • @aussiedigger1441
    @aussiedigger1441 6 років тому +1

    I've been flying the align 450l Dominator 6s for a bit over a 1 year now and I just bought the ALZRC 380 as a upgrade. I just can't wait to tictoc this bad boy. I'm thinking of getting the 420 now. Treat it right & you'll get plenty of use out of it. Happy flying mate.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  6 років тому

      Aussie Digger You will enjoy this girl she has a lot of power to get you out
      Of Trouble and not so much where you’re overwhelmed.Aussie dude your gonna have a shitload of fun with this helicopter

  • @eminstinct4114
    @eminstinct4114 4 роки тому +1

    ALZ RC not ALZRC lol also great video do more on this helicopter it’s such a great product and there’s not many reviews showing the frame all so I’d recommend the 380 on 3S and use her to practice because it’s belt drive and you will not strip or break as many parts such as gears and flimsy tail booms and even propellers because the sab goblin 380 the original version was meant for harsh and violent 3D flight that means it’s more durable during a bad crash thus meaning it’s great for people moving up to helicopters like this

  • @albertkundrat814
    @albertkundrat814 5 років тому +1

    Is there any danger if the blades suddenly fly off way out a field of practice, providing that these blades are sharp enough to do serious damage to some one near or far away?

  • @casperchea7865
    @casperchea7865 6 років тому

    In Australia a goblin 380 kit is about $550 at the time when i bought my Devil 380 which was one of the first production runs on banggood. Back then i had the whole thing ready to run for about $700 AUD all servos and electronics motor etc. I flew that for a year until i had a crash doing a speed run which totalled the bird, mind you i hit the roof of my farm house at over 120 kmh LoL.... however i loved the quality and the price of it i bought a Devil 420 kit to replace my 380 since that was out at the time. My Devil 420 is running a KDE XF925 G3, Castle Talon 90, KST 315 servos, ALZRC DS501MG Tail servo, KBAR Mini, 2x Spectrum DSMX Sat Recievers all electronics @ 7.4V. With regards to the plastic parts the only thing i would not use is the plastic servo holders. The rest i could not tell the difference in flight since i've flown the 380 which had all metal parts and the 420 had the plastic ones but i used my crashed 380 as a donor for the servo holders.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  6 років тому

      Hua Li that’s absolutely insane 120 khm. Well at least you’re that good.
      Why is the helicopter movement dying 🤔so sad to see something with so much potential rev down. By the way castle creations 90a is retardly good. I
      Have 160a in my 700

  • @chris-ip4pk
    @chris-ip4pk 3 роки тому

    I got one with the new spektrum fc6250hx, rock solid

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +2

    Does anyone know how to program the K-bar.

  • @TheMic36
    @TheMic36 7 років тому +1

    wow it's a beautiful Helikopter

  • @dirtcurt1
    @dirtcurt1 7 років тому +1

    have gone through setup procedures? Follow them from beginning to end a don't skip. Do you have Vstab on your PC?

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      dirtcurt1 No I have Vstab app on my phone which I had to pay 7 dollars it's got the same thing as the computer. So curt what do you think buddy? I'm pulling my hair out trying to figure this mini K-bar Yellow out. I just bought a. brand new one as well because my old one was thought to be defective when in fact it's perfectly fine.

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +1

    Why Thank you Michael that was extremely polite of you but unfortunately I had a very bad accident with her. I had just went and bought a Spektrum dx7 and as i was reversing the servo channels to suit my preferences i accidentally hit the throttle channel the whole helicopter lifted off the work bench hit the ceiling flipped over because I grabbed the tail to prevent any damage but by then it was already too late
    I destroyed ok are you ready for the damage ok here it goes........
    1. Bent metal tail holder. It wobbles when i throttle her up.
    2.Bent main shaft that also wobbles when I spin her up.
    3. cracked one of carbon fiber blades but is still usable. But knowing me i am very OCD
    so i bought not one but,,,two pairs lol"
    2.Broke one of the servo arms in the the process of trying to catch it as it went haywire. I will replace all servo arms with aluminum arms.
    2/3 of these items I just ordered reside in China so its going take a few weeks. I am so sad and bummed out. I already crashed my helicopter and check this out i wasn't even trying to fly her yet. Basically my helicopter crashed before it even had a chance to get her skids off the ground. That is Pathetic. That is the kind of luck I have. Well at least I know what I did wrong as to avoid it in the future. I definitely learned from this mistake.
    But that mistake costed me ohh I'd say about 150 dollars and a headache so Michael please hope i get this 380 off the ground with no issues.

    • @bushpilot4234
      @bushpilot4234 7 років тому

      Always remove main blades to prevent an accident on the bench. Number one rule! Others have cut themselves up and destroyed thier helis. People have been killed violating this simple rule. Good luck and stay safe!

  • @aussiedigger1441
    @aussiedigger1441 6 років тому +1

    Can't wait to maiden my Devil 380 which cost me AU$420 super combo. It's a good clone heli, better than Assault & some other brand's. My Align 450L 6s is still my baby for now? I'm thinking of getting SAB 380 head & swash. Happy flying mate.

    • @casperchea7865
      @casperchea7865 6 років тому

      save your money and get the Tarot 380 swash and head on aliexpress it's the same colour and cheaper than running the real sab parts.

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +2

    Hello My fellow UA-camrs. I love and sincerly miss you all.
    its sucks living in

  • @tonyduong70
    @tonyduong70 7 років тому +1

    Same as 380 Goblin 😃 I have both 😁 Devil us using K bar , Gobln is using Vbar Neo both are almost the same.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      Tony Duong I have the kbar yellow mini and a blue one called koala I have some much trouble programming
      them on the website so I downloaded the app did all my settings went to save them and couldn't. I am not in anyway bashing kbar becauae everybody likes them and some swear by them but I for the life of me cant save the settings so I called quits and went with a beastx clone. I know i am doing something wrong with the kbar. What
      I'll never know.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      digital servo alzrc 5 days

  • @endyX286
    @endyX286 4 роки тому +1

    what esc did u use? is that original esc that come with combo? btw nice review and lastly what do u think about this cheap heli?

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +1

    Does anyone know what servos will fit in an hk-550 without breaking the bank.
    i cant seem to buy any that will fit. i already had to cancel 3 orders that wouldn't fit.

    • @rtrent3988
      @rtrent3988 7 років тому

      Paul Santora My 1st 550 was a HK brand. I used 725mg kst servos on it. They work great. I use kst servos on all my heli's except my devil 380.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому +1

      Flyn lo thanks so much and its so nice you took the time to answer my message. I am using SpringRC sm4408 digital servos they work awesome. but unfortunately i have another problem Flyn I have an HK-550 flybar tail belt drive helicopter and I'm having a hard time trying to figure out how long the pushrods from the cyclic servos to the swash plate should be. the trex manual says 21.5mm but thats too long and the servo horns enter positive pitch and no longer at zero pitch mid stick like they should. Any suggestions Flyn. Thank you bud.

    • @rtrent3988
      @rtrent3988 7 років тому +1

      Paul Santora also, Lynx has a good variety of different length turnbuckles.

  • @chadb.104
    @chadb.104 8 років тому +2

    Looking good Paul !!

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому +2

      Chad B. whats up buddy hows it goin? I hope all is good for u

    • @chadb.104
      @chadb.104 8 років тому +1

      Paul Santora: Hey Paul !! It's going well bud. Can't complain too much. It's Just been cold as heck the past week or so. lol. Looking forward to seeing that Devil of yours in action !

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому +2

      Yea Chad its been cold here too in NY buddy. All I can tell you is dress warm, sleep well and take your vitamins lol seriously you'll feel better.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому +2

      Yes I absolutely couldnt agree with more
      cheap servos = Murder Machine. I plan on
      using either KST 525 digitals or Align brushless albeit very expensive I am not taking any chances. Those blades are very menacing and god only know what those blades can do. Thanks for the heads up and happy newyear. Talk to you later

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому +2

      Chad B. i just want to say hello to a loyal friend hope all is well. Speak to you soon.

  • @SylvainBuatois38
    @SylvainBuatois38 7 років тому +1

    Hi Guys!
    I bought this ALZRC 380 (the full combo same as yours from rc711.com ) but i have very big rudder vibration at ~ 2800/3000 rpm , does someone have the same issue? and how did you clear it? thx for your answer.

  • @dirtcurt1
    @dirtcurt1 7 років тому +1

    I can tell you I was scratching my head a few times programing the gold Kbar. I would start by re-loading the drivers. That was the trick for me. Then try to re start a few times. I recall that I had confusion if the setting was in or not . Have you flown it? Toss it if you can't figure it out. my buddy had one that wouldn't work the tail right and it never worked. I guess I got lucky.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому +1

      dirtcurt1 all 5 K-bars can't be bad I know there has to be one good one lol. Anyways so when your up to rotor max travel to get positive how do you lock it in?.
      I love the Tgz-380 or the BeastX Clone it is fucking. amaazingly simple to program​ but I got see
      how the K-bar holds up since I got like 10 of them.

  • @midnightnicolas84
    @midnightnicolas84 5 років тому

    Hello,where did u find the metal servo support? The full combo have the plastic support but i didnt find the metal.. can u help me to find tht?
    Thanks

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  5 років тому

      Nicolas Wesker I’ll help you ok bud.
      Look on Banggood.com I know the budget servo holders are garbage.
      The aluminum servo holders are about
      $30 dollars. Let me know what happens on bud?

  • @bushpilot4234
    @bushpilot4234 7 років тому +1

    Only thing i like about it is the belt drive main pulley. Almost expensive as a SAB.

  • @JimAustin
    @JimAustin 4 роки тому +1

    Hey bro! I just ordered the 380 FAST, can't wait. Anyway you still flying? I know this an old vid but nice shots of the machine so it's still a good source of info, how do like this monster? Is the flight controller easy to setup? Vids of it flying are great and it looks rock solid and smooth. Well have fun at field and I hope to hear from you. Thanks!

  • @wcwickedclown
    @wcwickedclown 7 років тому +3

    sweet birf good luck brother im here if you need me.

  • @tothepoint5416
    @tothepoint5416 7 років тому +1

    digital servos? how long shipping?

  • @harleyguy7
    @harleyguy7 6 років тому +1

    Great review mate very nice helicopter...
    I found this due to your nutty putty comment...very very scary video..

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +1

    I finally learned how to pronouce ALZRC lol. It's AHLLLLL-ZHEEEEEEEE
    NOT ALERC with a silent z.

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому

    People people dont mind the way i sound I was getting over the flu so I sound really stupid.
    Update..... You can buy the entire kit for 455.00 but i really dont like the servos they are the same servos as the company. I had them and they're ok not too bad definitely worth the money.

  • @tothepoint5416
    @tothepoint5416 7 років тому +1

    do haters sab b4 or after da gobble goo?

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +1

    Thomas whats up buddy. I actually found the driver and it works i had to watch all your videos to realize what i was doing wrong. Now i have watch your kbar setups to program it because now that this
    thing is hooked up to my laptop its behaving very strangely like I have never seen before but that will change in the setup. The tail how do i engage rate mode and heading hold? You know what I am saying Tom ?

  • @supportsabhelidivision2957
    @supportsabhelidivision2957 7 років тому +2

    Thank you "P.J. R.C. helicopter lover" for push Clone Company......

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      Support SAB Helidivision lol I wish I could afford an Sab they're beautiful beautiful helicopters. I will push Sab in my next video and eliminate this one sounds good.
      Once I save enough money to buy a SAB goblin 570. Now that one hella of a gorgeous heli.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому +1

      I do apologize for pushing alzrc and not Saab because alzrc was the first company I came across and not actually Sab so I do apologize about that I honestly did not know that Sab with the creators of the goblin so you have to forgive me brother

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +1

    do I poop when I spin up my helicopters? well I think that's an understatement I literally soil myself with liquid shit that's how scared I am. I'm serious. you have to see sometimes I'm literally inches away from the main spinning blade and I'm checking the tracking and I'm so scared my heart is pounding. but if I don't check the tracking the balancing the tail correction to make sure that the tale holds steady they'll be a very bad accident. And I know the helicopter you're getting what is it the xcf and it comes with the super combo it's like $259 that is a real good helicopter and the gyro is a big ole and it's similar or should I say the same thing as a beast X it's a really good gyro trust me it's made of all metal and not plastic. if if you have any questions don't be afraid to hit me up

  • @VS15T
    @VS15T 7 років тому

    Hows this heli ? Is that a metal rotor head or composite plastic?

  • @tothepoint5416
    @tothepoint5416 7 років тому

    hk 450? i jst got xfx 450 belt tail $259 i likes alot,flys awsum beestx clone. ordered 2 more. next is als rc devil tbr, i jizz a litle to think about it

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  7 років тому

      Does anyone know why my tail kicks out when I decrease my throttle rapidly.
      Sometimes it's so bad my 380 just spins real fast like she'll spin 4 times before coming to a stop.
      Thank god my tail never hit anything but it's really scary
      nevertheless. I really need to know because there are alot of experienced pilots out there that will blow me out od the water.
      Does anyone know how to stop that
      tail kick out when I decrease the throttle?
      I love all you heli freaks........

    • @tothepoint5416
      @tothepoint5416 7 років тому

      +P.J. R.C. helicopter lover scary do you poop a little when it spins? start with youre set ups mechanical then gyro? of course helifreak.com is my favorite. I had similar issue when got the xfx 450 I couldnt find exact servo frequency and rates, so gave my best guess. flew ok then I bumped tail feathers n got vibration, scrambled gyro n spun while inverted. hit the oh shit switch n try to set down soft but still rebuilding. my gyro extra sensitive to vibrations needs serious 3m foam tape. also check belts are not loose, sometime those little gears, cogs? will spin on the shaft. best o luck, stay smooth my friend

  • @dirtcurt1
    @dirtcurt1 7 років тому +1

    Down load it to PC. It will work better for setup.

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  7 років тому +2

    I am sorry i actually did. I couldn't hold back lol Well
    then there you​ go. Its a cheap
    25 dollars gyro that's Orange
    black there you go. Go figure.

    • @reeseville1
      @reeseville1 4 роки тому

      Need more info on that gyro reciever

  • @ejb2184
    @ejb2184 5 років тому

    I had a a 450 d03 that's was actually a pretty good heli I wish they still made helis

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  3 роки тому

      Are you talking about the Walkera 450 D03? By far the best beginner friendly helicopter on the planet. Because it incorporates self leveling which is helps alot.

    • @ejb2184
      @ejb2184 3 роки тому

      @@pauliether.c.guy.3349 yea walker don't make helis no more

  • @tonyduong70
    @tonyduong70 7 років тому

    I have both....she flies goid

  • @RCLIFTOFF
    @RCLIFTOFF 6 років тому +1

    Brah, that is way over priced! My 550 Dominator with a speed fuselage was $1100. Outch!!

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  6 років тому

      RC LIFT OFF! You ain’t kidding. Sometimes I feel like I got ripped off but don’t forget I got this when it first came out so it was a little bit on the pricey side but you’re right I can buy the entire kit from the 400 now maybe like three and change when it first came out RC left off it was like 4 to 6 hundred.

  • @kronchyrodriguez
    @kronchyrodriguez 7 років тому

    where you buy it at??? thx

  • @bearlaceration8971
    @bearlaceration8971 5 років тому +1

    You over payed 600

  • @pauliether.c.guy.3349
    @pauliether.c.guy.3349  8 років тому

    I really hate the way I sound in these videos

  • @fabricio-7
    @fabricio-7 7 років тому

    Cara por favor me ajuda... Eu tenho dúvidas

  • @timdoyle8199
    @timdoyle8199 4 роки тому

    It's pronounced A- L -Z- R -C (NOT alerc !! )

  • @timdoyle8199
    @timdoyle8199 4 роки тому

    A L Z R C

  • @jbm99566
    @jbm99566 3 роки тому

    Not "alerk" ALZRC

  • @curtissmartin6322
    @curtissmartin6322 6 років тому

    Way to much you could got a trex 470l. all metal super combo Damn rip off.way to much.

  • @wcwickedclown
    @wcwickedclown 7 років тому

    Thomas johnson

  • @feefeee
    @feefeee 8 років тому

    Interesting how you pronounce it. I always thought it was All-Zee- RC. lol, you also say trx rather than Tee-rex
    A thousand dollars for a 380 seems expensive.
    Ignore the elitist haters, people like them are the reason why people can't get into the hobby.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому

      felixthemaster1 well factor in the servos 50$ a pop and you need 4 then the gyro 200$ then the motor and esc 120$ then the kit 350$ its crazy.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому

      Is that how you pronounce it " All- Zee" I thought it was " Aah- lerc" but you could be right since i never
      heard anyone say the actual name.
      i had to make my own pronunciation.

    • @feefeee
      @feefeee 8 років тому

      The T-rex, is obvious. But I have never heard AL-Z-RC either, so judging from how others are pronounced, I assumed it was this way :)

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому

      ok i just learned something new cool.

    • @pauliether.c.guy.3349
      @pauliether.c.guy.3349  8 років тому

      because think about it how do u pronounce a name with no vowel in the middle

  • @timdoyle8199
    @timdoyle8199 4 роки тому

    A L Z R C