Great video. I have a question, so i have the Wall Mount for Video Bar (the white bracket to mount the rally bar) component that was installed by the previous guy and i wish to have it removed, do i need a power drill to remove that wall bracket part (i can easily slide out the Logi Rally Bar from the bracket)? I'm beginner on these Logi VC units so any advice will be appreciated. Only have a phillips head screwdriver on hand
Hi! You can use the Logitech Swytch to enable BYOD. That would the easiest way. If you want to remain in the Teams MTR solution, you could look to create a PowerApp for booking meeting rooms and look to entra b2b connections between the 2 tenants
Great video. Just one question, what can be the minimum distance between the rally bar mini (mounted on a wall) and the nearest person at the conference table? I am designing a small meeting room but space is a constraint.
Hi Varun. The distance can be really close, even against the tv. The Rally bar mini has a 120° wide camera angle. So you should be fine with around 0.5 - 0.7m for the closest person to the bar.
Your bar would then be in BYOD mode as you'd use your own devices. If you want to use the Teams MTR layer, you'll be better off using the Teams MTR version of the Rally bar instead of the Lenovo.
Hello, it is possible if we change the video service provider later? and it is possible is the configure the existing video service provider will be saved?, and what the difference log in with generate code and Provision Device way?, thank you!
Hi there! Yes it is possible to change the service provider on a later time, but this will require a factory reset of the device. If you want this setup to work with multiple providers (say you use MS Teams, but want to use the same setup for Zoom), I can only advise you to look into the Logitech Swytch as an addition to your room (www.logitech.com/en-us/products/video-conferencing/room-solutions/swytch.952-000009.html)
You only need the Intel NUC if you want to use the Teams MTR solution for Windows. If you want to use MTR for Android, the OS is runnning from the Rally Bar
Great video. I have a question, so i have the Wall Mount for Video Bar (the white bracket to mount the rally bar) component that was installed by the previous guy and i wish to have it removed, do i need a power drill to remove that wall bracket part (i can easily slide out the Logi Rally Bar from the bracket)? I'm beginner on these Logi VC units so any advice will be appreciated. Only have a phillips head screwdriver on hand
This is a really good presentation - thanks!
You connected the Tap to the rally bar using bluetooth?
Great Video
We have a office thats used by 2 companies, should users use BYOD or log each time into teams with the devicelink?
Hi! You can use the Logitech Swytch to enable BYOD. That would the easiest way. If you want to remain in the Teams MTR solution, you could look to create a PowerApp for booking meeting rooms and look to entra b2b connections between the 2 tenants
Great video. Just one question, what can be the minimum distance between the rally bar mini (mounted on a wall) and the nearest person at the conference table? I am designing a small meeting room but space is a constraint.
Hi Varun. The distance can be really close, even against the tv. The Rally bar mini has a 120° wide camera angle. So you should be fine with around 0.5 - 0.7m for the closest person to the bar.
@@CloudbyDre Thanks!!
l8 to the party, but Rally Huddle is now available and could fit ur needs.
hows the connection be if we add a lenovo thinkcore PC?
Your bar would then be in BYOD mode as you'd use your own devices. If you want to use the Teams MTR layer, you'll be better off using the Teams MTR version of the Rally bar instead of the Lenovo.
Hello, it is possible if we change the video service provider later? and it is possible is the configure the existing video service provider will be saved?, and what the difference log in with generate code and Provision Device way?, thank you!
Hi there! Yes it is possible to change the service provider on a later time, but this will require a factory reset of the device. If you want this setup to work with multiple providers (say you use MS Teams, but want to use the same setup for Zoom), I can only advise you to look into the Logitech Swytch as an addition to your room (www.logitech.com/en-us/products/video-conferencing/room-solutions/swytch.952-000009.html)
@@CloudbyDre thank you for the answer, how about the different login with generate code and Provision Device way?
Can i use a Logitech Graphite Rally Bar as a tv sound bar?
I don't think you can. Can't say it for sure though 🤔
Do you need the Intel Nuc too? Or just the Rally Bar + Tap?
You only need the Intel NUC if you want to use the Teams MTR solution for Windows. If you want to use MTR for Android, the OS is runnning from the Rally Bar
@@CloudbyDre oh thanks!! And the Licens for Teams Room come with the Rally Bar Or do you have to buy them separately?
@@steffenbukowski7 the Teams Rooms Standard or Premium license can be purchased in the Office365 admin center of via a Microsoft partner
Great video. Congratulations, you help me at Brazil :D