@@krazy88korean yeah, red/green, purple/blue...the list goes on. Like you, I can see the colors, just can't determine what color they are. In RC, what gets me is wire colors, paint on shock springs, and LED lights on electronics......the famous "wait for green light". Seriously??
@@TheRCNetwork I have learned to just assume that any red lights will not have the same intensity as green lights. What confuses most people is that healthy grass is what I would call an orange.
Not sure.....I'd check the part numbers on the chassis first...Senton might be a bit longer....Otherwise, It should just be body mounts and that's it then
My GF and I are considering this for our first "shared" car. We do share our seperately owned cars but wanna split the cost of our next car to afford a better one. This looks like it'll be good as an allround car for driving in rough terrain and skate parks and stuff.
I try and keep it concise and to the point....as a viewer, I'm like you....I hate the new trend of these "live" videos that are 1, 2, 3 hours. I don't have time for that. This video started before editing at 13 minutes......al edited up right over 8. That's winning right there..I bought you 5 minutes of your life back!
great video. I legit just ordered one through your link for my wife. I like 3s and also like the power switch on the radio. That way I can let my wife work out to 100%. She is good with a crawler but just can not figure out the speed part. Also gives me an other truck to play with. I had a 4s outcast and enjoyed it a lot. Sold it but sorta miss it. This should be fun.
@@francostacy7675 a few reasons - 1/10th scale are smaller, lighter, easier to control and usually cost less. 1/8th are the opposite - obviously larger, heavier and priced higher usually with higher spec’d components. Beginners will go through a phase of breaking their RC due to poor driving/learning. 1/10th scale is cheaper (usually) to fix and will keep the new RC owner still in the hobby.
I have the big Rock, The Vorteks is 287MM (11.3") wheelbase The Big Rock is 327MM (12.87") , BR is about 1.5" longer wheelbase. Hope this helps, BTW the Granite is the same wheelbase (same chassis) as the Votreks
I need the 1/10 scale. Outside the U.S. a lot of RC circuits set their track limits to 1/10. 2S and 3S is perfect because AGAIN, they may even say "Okay the size is okay, but 2S is the limit". I just worry about those plastic outdrives. Hopefully, Aftermarket will come with a solution for that.
I like all size rc's but 1/10 is great cause it only needs 1 battery, cheap parts /entry price and because they are lite weight they are durable, portable, easy to work on and can be enjoyed in a small space.
Does it really has all steel gears? If you look at the website it looks like its the same input and diff gear as the other 3S cars. Parts numbers in the manual is also for the plastic gears.
I'm going off of the box, which states it has "37t, 1.35mod diff metal gears" and "heavy duty steel input and 1.35 mod 37/13t gears. I didn't have access to any specs prior to today
Have been looking for one am kicking myself I should have bought the axial yeti score trophy truck when they were out now can't find one and I don't know what one to get it's so depressing
Its 1/5 Bajas all day over here!!😂🤘Ok ok, diggin the Purple! I have a Arrma Granite 4x4 3s BLX its fun and quick but dislike how short the wheelbase is.
@@TheRCNetwork omg you do not have 1/5 Baja of any style?! 😱 whole new experience over all 1/7 1/8 1/10 etc rigs! Infact you can make onw brushless if ya didnt want to do gas yet, i have a KM Baja 5B EVO 8S "juicy fruit" w/a Hobbywing V3 Max 5 200Amp w/ a 960KV its a torque monster faster than any stock gas baja i have videos of it decimating everything on my channel you should come check it out i also work with Rcmax just.finished a worlds first Rcmax dual splashed Supreme 55 Big Bore Baja its so epic!😎🤘 any questions you may have about 1/5 and the Baja platform feel free to ask brother!🤝
I'm going off of the box, which states it has "37t, 1.35mod diff metal gears" and "heavy duty steel input and 1.35 mod 37/13t gears. I didn't have access to any specs prior to today.....but some of the fancy wording techniques could navigate to a plastic bevel still.
I checked everything on Arrma website 😀 : Steel input means that it has steel shaft, but the gears are plastic (it doesn't mean they are junk, they really hold up well 🙂 ) 3s and 4s diffs are the same 🙂 Vorteks also has plastic spur gear, like all other 3s cars 🙂
NO! The gears are NOT steel. They are still plastic. The “heavy duty steel input” is solely in reference to the little metal piece the center driveshaft connects to. The Steel gears are all jet black
@@TheRCNetwork very much agreed. Hopefully they’ll put in metal gears on the 4s RTRs or something. If you’re curious these are the steel gear part numbers 310886 310885 310772 (required differential cup)
I'm sure China has a $1.99 RC...but why would you support that? Buy from a reputable brand and support a local shop if possible. The return on investment will be plentiful.
HPI has been back like 12 times since they "left". I still doubt we will ever have the old HPI ever back....they were located about 5 miles from my house
I prefer RCs that are in running condition! 1/10th or 1/8th doesn't matter.... which ever out of my fleet that's running at the moment..... I'm kidding gimme 1/8th scale e-truggy 😀
@@TheRCNetwork Tekno, Losi, Mugen, or Team Associated. Those are tier 1...Kyosho, Serpent, HB, Agama tier 2... Arrma, Traxxas make great Bashers and are more RTR & beginner friendl.. meant to answer JfeelGood 👍🏾 I have Serpent Cobra 811te RTR- kinda pricey for RTR, but I'd probably should gotten Kraton for the driving i do
All metal gearing? Only in the servo, the diffs are the exact same as the Granite, Senton (3s), Typhon (3s) and the Big Rock. Both the pinion and ring are plastic gears, though the diff pinion is a Hybrid with a metal shaft, connecting to the driveshaft. I have the big rock and looked it up, the exact same part numbers. also the chassis is the exact same as the Granite, so a tire and body swap instant Vorteks. I am not saying this to knock on it, I have the Big Rock and I love it. But you are are not telling the truth, on the all metal gears. The only places where the gears are metal are in the servo, pinion (motor) and inside the diffs. Anyone doesn't believe me, there is an exploded view available on Arrma's site for all three. I looked at it (Granite, Big Rock and Vorteks), the part numbers are identical. As I said, got no beef with Arrma (Love mine), just saying this guy is not telling the truth, There is a steel pinion/diff and a spur gear options, but they are not STOCK. Also don't let the plastic diffs dissuade you, Mine haven't popped or slipped any at all and I'm running 3s, they are fine
@@mybusiness6125, On their site, there is exploded interactive (click on the Part Numbers) views for all of the vehicles offered, I looked at the part numbers they all match. Like I said, this wasn't to knock Arrma at all, I have one (Big Rock) and love it. Not one single problem with it, other than my rusty soldering skills. Hit a tree tore a chunk out of the tree, but nothing bent or broke. I only wanted people, that watch this to know His comment of all metal gears was incorrect, though metal options exist
I'll stick to my rustler 2wd lol. It looks nice but there's soooo much plastic, even the pivot balls, like come on. Those shocks would be the first to go. Can't stand unthreaded shocks and def all plastic is a no no for me. I have GTR's on my rustler.
I like 1/8 scale however there is a serious lack of 1/8 scale tracks around me which is why I have more 1/10 scale. In saying that, nobody at the 1/10 track would appreciate me or anybody else rocking up with this 1/8 truck pretending to be a 1/10 truck. Fan on motor is a great touch. Plastic chassis and drive shafts? Uhh not for me
That would be cool....as well as an improvement to the driveshafts - maybe making them traditional steel CVD style. I doubt that Arrma would do a kit though
I never said it was a competition stadium truck....as you know (most) comp stadium trucks are 2wd, well at least the classes are. I did mention the ET410, and the Rustler 4x4, because I was thinking of what other 4wd stadium type of trucks there currently were.
AVC is "Active Vehicle Control" - it's a gyro built inside the receiver and it's controlled by the old "Dual Rate" switch on your radio. Basically if your RC starts veering left, it will will correct with right steering input to keep you straight. The dial can either turn up the response or turn down the response or amount of correction
Vorteks 4x4 or Rustler 4x4? 🤔
I'd still go with a rustler 4wd vxl
I have Rustler, no fear not to have Vorteks as well :)
Dependa how fast you break it! Ill get back to ya haha
Considering pricing I'd say the vorteks bet it's 60$ more than the other ones in the line up
Vortex, there's no comparison. Same durable chassis and better plastic parts that Arrma offers.
Pink and Purple body FTW!
I call it blue.......#colorblind
@@TheRCNetwork
I had no idea you were colorblind, didn't seem to come up in past videos. I am red-green myself.
@@krazy88korean yeah, red/green, purple/blue...the list goes on. Like you, I can see the colors, just can't determine what color they are. In RC, what gets me is wire colors, paint on shock springs, and LED lights on electronics......the famous "wait for green light". Seriously??
@@TheRCNetwork
I have learned to just assume that any red lights will not have the same intensity as green lights. What confuses most people is that healthy grass is what I would call an orange.
Yep, agreed on all of that.....then there's the traffic lights. Green as everyone else calls it, looks white to me
I have 2-10 scale that I love to rip around the track. Just bought my first 8th scale Tekno EB48.2. Can't wait to build it 😊
You'll love the EB!
That pink/purple combo just doesn’t stop poppin’! Very nice.
I call it blue....😁
Great video! That Arrma Vorteks 4x4 looks so cool! Looking forward to the running video! 👍😉
Thanks buddy! Should be able to film it this weekend
A semi-automatic wheel wrench. Lolzzz. Rich, you make the best rc videos in the game. Thanks for coming back
Thanks buddy! Yeah, I saw that wheel wrench and came up with that on the spot!
He does. I mean it 🤓
Semi automatic wheel wrench🤣 Great video! I like this color almost regret preordering the cough cough blue one😊
Gotta poke a little fun! Enjoy the new RC!
Will these body fit the senton 3s if u where to remove the side holders on the frame to hold the body on the senton inside looks just like the senton
Not sure.....I'd check the part numbers on the chassis first...Senton might be a bit longer....Otherwise, It should just be body mounts and that's it then
I'm surprised this doesn't come with the SLT 3 remote all the other 3a ones do. I wonder if they're phasing it out
Possibly.....
Have to say. I really like your qwik vid. Very detailed. I’m getting this. It will be 1st arrma
Thanks Eric - I try to quick and concise. No fluff, no drama. It's a great first RC
My GF and I are considering this for our first "shared" car. We do share our seperately owned cars but wanna split the cost of our next car to afford a better one. This looks like it'll be good as an allround car for driving in rough terrain and skate parks and stuff.
It's a great RC overall - especially on 3s
was looking to get myself a 1 battery basher. had my eye on a big rock. might have to get one of these instead.
Grab that GensAce 8000mah Bashing Battery - you'll be driving for like an hour! It fits perfect too
@@TheRCNetwork good to know. Thanks
Congrats, I choose my reviews by the length and you won with the shortest one 😀
I try and keep it concise and to the point....as a viewer, I'm like you....I hate the new trend of these "live" videos that are 1, 2, 3 hours. I don't have time for that. This video started before editing at 13 minutes......al edited up right over 8. That's winning right there..I bought you 5 minutes of your life back!
Welcome back vorteks, it's original I still own, the 2wd brushed. One of the first cars arrma produced.
Yep, I had one too....
great video. I legit just ordered one through your link for my wife. I like 3s and also like the power switch on the radio. That way I can let my wife work out to 100%. She is good with a crawler but just can not figure out the speed part. Also gives me an other truck to play with. I had a 4s outcast and enjoyed it a lot. Sold it but sorta miss it. This should be fun.
Good deal - this is a great first "go fast" RC...especially with the limitations on the radio.
Arrma did a good job with this one 👍 I want to try out the tires 🤩
The whole truck is great...hopefully drives as well as it looks...tires are one of my favorite after the backflips
Just got mine! It is insane
Nice!
Awesome stadium-truck💥👌and great size scale also!
It is.....great for nearly anywhere!
Gotta hand it to Arrma for keeping Traxxas on their toes... A few years and a couple of smart business moves, and they could be going head-to-head!
Yep, they've been knocking it outta the park since the OG Kraton came out
Great review best one on UA-cam 🙏
Thanks buddy! Maybe a subscribe?
So epic! What a beast, great video 😎👊👍
Thanks buddy!
1/8 th. But these look really good. I started with a 1/10 scale which everyone should
Completely agree....beginners should not start with 1/8th
@@TheRCNetwork why not?
@@francostacy7675 a few reasons - 1/10th scale are smaller, lighter, easier to control and usually cost less. 1/8th are the opposite - obviously larger, heavier and priced higher usually with higher spec’d components. Beginners will go through a phase of breaking their RC due to poor driving/learning. 1/10th scale is cheaper (usually) to fix and will keep the new RC owner still in the hobby.
belle présentation, bien détaillée comme d'habitude ! top 👍
Thanks Philippe!
I do like the wheels, I remember when this model was 2wd.
Wheels are great...very Method 101-ish. yeah, I had the 2wd one
Awsome review Mr rich
Thanks buddy!
would hav ebeen nice to see a rustler and an arrma granite and/or bigrock for the sizing
Would have been nice if I had one of those 😳
I have the big Rock, The Vorteks is 287MM (11.3") wheelbase The Big Rock is 327MM (12.87") , BR is about 1.5" longer wheelbase. Hope this helps, BTW the Granite is the same wheelbase (same chassis) as the Votreks
I think this is the most in depth review of the new Vorteks
Thanks. I try to be concise and to the point.
Awesome unboxing bro.....👍🏾💪🏾💯
Thanks buddy!
I need the 1/10 scale. Outside the U.S. a lot of RC circuits set their track limits to 1/10. 2S and 3S is perfect because AGAIN, they may even say "Okay the size is okay, but 2S is the limit". I just worry about those plastic outdrives. Hopefully, Aftermarket will come with a solution for that.
I think as long as you keep the Vorteks within the power it was intended, the outdrives will be fine
I like all size rc's but 1/10 is great cause it only needs 1 battery, cheap parts /entry price and because they are lite weight they are durable, portable, easy to work on and can be enjoyed in a small space.
Very true.....especially after lugging a Mojave around!
@@TheRCNetwork or my X-MAXX!
Possibly a future running video over at regency?
Yep, or my new spot.....
Does it really has all steel gears? If you look at the website it looks like its the same input and diff gear as the other 3S cars. Parts numbers in the manual is also for the plastic gears.
I'm going off of the box, which states it has "37t, 1.35mod diff metal gears" and "heavy duty steel input and 1.35 mod 37/13t gears. I didn't have access to any specs prior to today
@@TheRCNetwork Its says the same on the box to my Senton but it has the plastic gears.
Gotcha - looks like some fancy wording by the company.....
I like 1/10th scale cause most of tracks I run on are homemade backyard tracks that are relatively small. Tekno et410.2 all the way baby love mine
Good info...I agree on the 1/10th sized tracks....theres more of them
@@TheRCNetwork thanks for the reply back man. Great videos you helped me decide what to do with my et410.2 build thanks.
Both 1:10 and 1:8🥰
I LOVE how they gave a heater for a wheel wrench with all the anti-gun culture going on these days.
yep....I never saw that from Arrma before...that wheel wrench, that is
Have been looking for one am kicking myself I should have bought the axial yeti score trophy truck when they were out now can't find one and I don't know what one to get it's so depressing
Score's are gonna become the next Axial Exo Terra....hard to find and they will go up in price
@@TheRCNetwork plenty of spares I can find,I can't find any cars or kits of them ,they are rarer than a live t rex lol
I like the 1/10 th size, love my MAXX and my Losi Tenacity DB pro
The Max is pretty descent! I haven't owned a DB Pro, but have heard good things
For me, I have to say 1/10 or smaller. But that comes down to space restrictions for running
Agreed!
Semi automatic wheel wrench. lol best line of the video.
Thanks! Didn't quite know what that was when it fell out of the bag
Isn't that an ic3 not an ic5 connector my dbxle 2.0 came with ic5's
Nope, IC5's on these
How does your paint job look on your et410
Awesome!
10th scale! Interesting. But do I want it?
It's pretty cool - but that's from lugging a Mojave around the past weeks......
Its 1/5 Bajas all day over here!!😂🤘Ok ok, diggin the Purple! I have a Arrma Granite 4x4 3s BLX its fun and quick but dislike how short the wheelbase is.
For the size of truck, the WB is perfect....I need to get a 1/5th scale!
@@TheRCNetwork omg you do not have 1/5 Baja of any style?! 😱 whole new experience over all 1/7 1/8 1/10 etc rigs! Infact you can make onw brushless if ya didnt want to do gas yet, i have a KM Baja 5B EVO 8S "juicy fruit" w/a Hobbywing V3 Max 5 200Amp w/ a 960KV its a torque monster faster than any stock gas baja i have videos of it decimating everything on my channel you should come check it out i also work with Rcmax just.finished a worlds first Rcmax dual splashed Supreme 55 Big Bore Baja its so epic!😎🤘 any questions you may have about 1/5 and the Baja platform feel free to ask brother!🤝
I like all scale rc
Me like. Do you think it would do good on a track ?. I like 10th scale myself.
Yeah, sure.....might need the right tires, depending on the track, but it should do well
@@TheRCNetwork cool, thanks
Nice video Rich but this truck is not for me lol ,want the NEW TEKNO ET48 and the Losi SBR.
I def. like the quality of a good kit!
Torn between this and Traxxas Maxx V2 - anyone have any thoughts?
I didn't like the Maxx, but I had the original version.....
Nice price point for a RTR.
I agree on that and $50 cheaper than the Traxxas version
goodie another box, how about you tell me what is in it? this is so great. not just anybody can open a box. lol
Nothing like having JQ’s little koolaid drinkers here on the channel.....thanks for stopping by and running up my algorithm. 😃👍
Nice
Thanks for stopping by!
I/10 scale not to small not to big,,plus they can fly,,oh yeah,,lol😉
Very true!
I like 1/10. But I prefere 1/8 scale. Greetings from Belgium 🇧🇪👍
Sounds good - greetings, my friend!
1/8 scale for me. Can you do a birthday gifts for an rc racers and bashers?
1/8th scale is cool....but not sure what you're asking.
@@TheRCNetwork A video list of great gifts for anyone that wants to give someone that races or bashes rc cars.
Not all gears are metal 🙁 Diffs are plastic (input and crown), but they hold up well on 3s 🙂
I'm going off of the box, which states it has "37t, 1.35mod diff metal gears" and "heavy duty steel input and 1.35 mod 37/13t gears. I didn't have access to any specs prior to today.....but some of the fancy wording techniques could navigate to a plastic bevel still.
@@TheRCNetwork That's not the diffs..
Everything inside of the Vortex is the same as the rest of the 3S line up.
@@Mapantz1 the diffs look like the 4s ones
I checked everything on Arrma website 😀 :
Steel input means that it has steel shaft, but the gears are plastic (it doesn't mean they are junk, they really hold up well 🙂 )
3s and 4s diffs are the same 🙂
Vorteks also has plastic spur gear, like all other 3s cars 🙂
I have a bag full of stripped out ring and pinions the prove otherwise 😝
Is this a new truck?
New-ish truck, yes
One for the whole family!
Yep, this can easily become a family truck
1/10 for sure. Cheaper to maintain.
Agreed on that one....although race electrics for 1/10th can be more than 1/8th, right?
I like 1/8 is Better and bigger screws easier to work on
I agree on that one.....love having M3/M4's on everything
NO! The gears are NOT steel. They are still plastic. The “heavy duty steel input” is solely in reference to the little metal piece the center driveshaft connects to. The Steel gears are all jet black
Thanks for the correction.....tricky wording by Arrma on the box
@@TheRCNetwork very much agreed. Hopefully they’ll put in metal gears on the 4s RTRs or something. If you’re curious these are the steel gear part numbers
310886
310885
310772 (required differential cup)
Factory vented tires???
Yes like all new arrmas
Yes, helps prevent ballooning
@@TheRCNetwork that's great to see companies doing that. Not just ballooning but getting crap out of the tires so foams don't get destroyed.
I love RC cars, which is the cheapest RC in the WORLD? 😵👍 I want to buy one
I'm sure China has a $1.99 RC...but why would you support that? Buy from a reputable brand and support a local shop if possible. The return on investment will be plentiful.
Looks like same as all the others. Just a new body. Scale wise i preffer my xmaxx and hpi xl flux. Hpi is back so lets go
HPI has been back like 12 times since they "left". I still doubt we will ever have the old HPI ever back....they were located about 5 miles from my house
I prefer RCs that are in running condition! 1/10th or 1/8th doesn't matter.... which ever out of my fleet that's running at the moment..... I'm kidding gimme 1/8th scale e-truggy 😀
I hear ya! I went to grab a crawler the other day, had it all packed in my truck...realized I snatched the servo from it a couple months earlier!
Which e truggy do you recommend? in the market for one
@@jfeelgood8075 Tekno ET48 2.0 - I just released two videos on it. Amazing Truggy
@@TheRCNetwork Tekno, Losi, Mugen, or Team Associated. Those are tier 1...Kyosho, Serpent, HB, Agama tier 2... Arrma, Traxxas make great Bashers and are more RTR & beginner friendl.. meant to answer JfeelGood 👍🏾 I have Serpent Cobra 811te RTR- kinda pricey for RTR, but I'd probably should gotten Kraton for the driving i do
All metal gearing? Only in the servo, the diffs are the exact same as the Granite, Senton (3s), Typhon (3s) and the Big Rock. Both the pinion and ring are plastic gears, though the diff pinion is a Hybrid with a metal shaft, connecting to the driveshaft. I have the big rock and looked it up, the exact same part numbers. also the chassis is the exact same as the Granite, so a tire and body swap instant Vorteks. I am not saying this to knock on it, I have the Big Rock and I love it. But you are are not telling the truth, on the all metal gears. The only places where the gears are metal are in the servo, pinion (motor) and inside the diffs. Anyone doesn't believe me, there is an exploded view available on Arrma's site for all three. I looked at it (Granite, Big Rock and Vorteks), the part numbers are identical. As I said, got no beef with Arrma (Love mine), just saying this guy is not telling the truth, There is a steel pinion/diff and a spur gear options, but they are not STOCK. Also don't let the plastic diffs dissuade you, Mine haven't popped or slipped any at all and I'm running 3s, they are fine
I was wondering about this. I think you're right.
@@mybusiness6125, On their site, there is exploded interactive (click on the Part Numbers) views for all of the vehicles offered, I looked at the part numbers they all match. Like I said, this wasn't to knock Arrma at all, I have one (Big Rock) and love it. Not one single problem with it, other than my rusty soldering skills. Hit a tree tore a chunk out of the tree, but nothing bent or broke. I only wanted people, that watch this to know His comment of all metal gears was incorrect, though metal options exist
so... its a rustler?
Of course not, this is an Arrma - but sure, it's a 4wd Stadium Truck......where the 4x4 Rustler is the only competition
Want them wheels'n tires for my Maxx. (...probably won't fit, though. Stupid Universe!)
They'll be a bit small for the maxx
1/8th scale realy. 10th scale are nice too.
I like the lightness of 10th scales...especially carrying them!
Tiny compared to my 30lb Outcast 8s 😎
Yes, very...but that is a 5th scale.......
I'll stick to my rustler 2wd lol. It looks nice but there's soooo much plastic, even the pivot balls, like come on. Those shocks would be the first to go. Can't stand unthreaded shocks and def all plastic is a no no for me. I have GTR's on my rustler.
The Rustler is the OG of Stadium Truck RTRs.
It’s a granite with a new body
There's a couple other changes...but yes, similar
First!!!!
Yes, you are...
Not 100% sure. I'm not color blind though and that looks like blue and pink IMO
Box said Purple, and since I couldn't tell....I ran with making myself think it was blue
I like 1/8 scale however there is a serious lack of 1/8 scale tracks around me which is why I have more 1/10 scale. In saying that, nobody at the 1/10 track would appreciate me or anybody else rocking up with this 1/8 truck pretending to be a 1/10 truck. Fan on motor is a great touch. Plastic chassis and drive shafts? Uhh not for me
I agree with that. One of my spots feels really small when running 1/8th....but right at home with 1/10th
Oh, no... Arrma is at it again... Well, at least they don't make the crap Traxxas makes.
Arrma is always "at it!"
I hope they come out with a kit car ....that electronics are ....mmmh lets say mediocre 😂
That would be cool....as well as an improvement to the driveshafts - maybe making them traditional steel CVD style. I doubt that Arrma would do a kit though
Semi automatic wheel wrench lol😂
Gotta have fun, right? never seen a wheel wrench like that before....
Semi automatic wheel wrench😂
Gotta poke some fun, right? never seen a wheel wrench like that before
A semi automatic wheel wrence lol
Gotta poke fun!
1/8th for racing and bashing, just more physics and drama. 1/10 for crawling for obvious reasons, industry standard more or less.
Very true.....I agree with that
This is not a competition stadium truck, it´s a basher like Granite or Big Rock.
You can setup nothing.
I never said it was a competition stadium truck....as you know (most) comp stadium trucks are 2wd, well at least the classes are. I did mention the ET410, and the Rustler 4x4, because I was thinking of what other 4wd stadium type of trucks there currently were.
Wtf avc
AVC is "Active Vehicle Control" - it's a gyro built inside the receiver and it's controlled by the old "Dual Rate" switch on your radio. Basically if your RC starts veering left, it will will correct with right steering input to keep you straight. The dial can either turn up the response or turn down the response or amount of correction
@@TheRCNetwork yeah I know what it is but damn didn't know they'd include it on a 300$ car. That's sick