Wood Stove Made From A Propane Tank! | Workshop Satisfaction
Вставка
- Опубліковано 26 сер 2024
- Making A Wood Stove From an Old Propane Tank
/ workshop_satisfaction
Music Used:
Delyno Ft. Andrei - One More Shot (YME Remix)
YME - Tilt
Time Effort:
Working & Filming ~ 11 hrs
Editing ~ 6 hrs
Whole Video ~ 17 hrs
Thanks I took your idea and ran with it
I have something like that in my garden shed, but I made the smoke stack closer to the edge of the cannister and then made a small steel box ie an oven that was welded over the center. Baked potatoes are great on a cold day and also keeps my kettle hot for when you stop for a lunch break.
Wow, welding without gloves !! I have'nt tried that one yet. Great music
Project looks great, and the music was quite pleasant, thanks.
Bet you could engineer these awesome sounds playing from your workshop. A Craftsman at work...
This would be a nice little project to take on with my everlast welder.
Mans hands gonna be crispy
Nice looking stove. Love the baffle, makes all the difference in the world. Awesome video 👌
where is the baffle? Time code perhaps.
Nice build ...
Cool tune 😎
How hot does your stove get?
Awesome video!!! Nice job!!! 2 thumbs up.
Very cool!!!! Liked everything about the video, including the music.
Hello Great Video!, I understand why to flood the tank, but why burn it?
to remove the paint.
That nice . Well done.
All vid's like this help us with not much idea how too and the skills to start and get better.
Thanks
Plus I've now subscribed to your channel.
Thank you
Does anyone know what the music in the video was???
@@vacumbackrubberIt is mentioned in the description.
Good job and great Video but does the fire get enough Air through the few Holes?
After igniting we leave the door open. After it starts to burn we close the door and the fire gets enough oxygen.
Sweet
How much of an area does this heat? Love the build good job
Around 25 square meters.
You will not die welding without gloves.
I don't know how to weld, but I'd like to know what kind of welder you're using?
It's a MIG (metal inert gas) (Argon/Co2) welder.
*Сначала нужно его водой заполнить до самого верха, а то может взорваться.*
Could you edit to your music..?
What was the steel plate for that you welded in the top? Not seen that done before
It is there to divert the flames and slow down the burning of the wood.
@@workshopsatisfaction5913 does it work well. Im making one from a 15kg gas bottle.
There are no real disadvantages, but we still recommend it.
It's a "Baffle". And it not absolutely necessary, but it sure does make a difference. Nice work on the project. But what happens when you close the door? Does the fire go out? It needs a combustion air inlet.
There are small holes at the bottom letting air in. These are big enough to keep the fire going once its burning on it´s own. This has the advantage that the fire burns slower and you don´t use so much wood.
Flue not big enough
great stove great video but one thing that makes me cringe and i have seen lots of people do it is wipe swarf of steel with bare hands I did it once and had 10 stitches
give it a few years and the melanoma cutting begins from the UV light. i wish people would take safety more seriously.
Not a bad video on mute.
Welding with no gloves?
Are you nuts?
Apparently
MIG welding with no gloves? 🙄
Wear some gloves
Just don't cut in a tank.....
We flushed it so it is safe.
In the beginning the video said it was flushed.
Can you get rid of the music 🙂
Yes
This music sucked
you need to find some gloves before you end up in the emergency room with a bad burn!!!!!!!!!!!!!
👎
Artsy fartsy but Not very instructive and it lacks explanation as to how you use the machine other than building a roaring fire in its chamber. Not impressed But oh sorry I don’t mean not to be respectful the overall look of the video was cool and took a lot of work it was entertaining thank you.
Only Idiots would work on a propane tank without pulling out the valve and turning the tank upside down over night to let all the propane gas escape !!!!!!!!!!!!!!
We flushed it with water.
I used to know a man that filled a gas tank with water to weld on it after he drained all the gas out of it . He had the scars on his face for the rest of his life from it blowing up on him. I always turn the gas tanks upside down so every bit of gas can drain out / fumes and leave it that way for days minimum over night. You do what you want but I would rather fill them with exhaust if there were the slightest possibility .
Best wishes and good luck.
Of course you have to empty the tank afterwards by turning it upside down. That‘s what he probably skipped or just didn't do it careful enough.
Yes
There is also the issue with gas tanks like some Hondas
They can have inside ridges that can hold up to about a cup of gas
even when turned upside down.
Peace
@@workshopsatisfaction5913
Did you watch the first 15 seconds? They said they flushed and burned the tank. Also there is no valve on the top of the tank.