I am here learning to prepare to buy my first race rc car ever. XRT for $1000 u.s. I used to love RC cars as a kid. Now I am 31 I can afford to buy a real RC car and not a toy.
Thank you for the great info. I have a cheap RC boat that once work and no longer works. The board has power, but the remote does. New batteries didn’t help. Any suggestions on where to start?
All your videos are very helpful, thank you but can you do a vid on how to change the programable ESC settings and what difference they make to the RC. IE the running mode, brake drag force, punch and brake force. Thanks guys.
Hi mate nice informative video can I ask your advice please. I have a original hornet RC off roader but I took out the battery pack to insert a ubec, would I now need to replace the ESC and controller? as I'm having trouble and confused me and can't move on to finish it. Any help appreciated. Thanks, mark.
There is a trim knob for each channel. The knobs are used to adjust the steering or throttle so that the car tracks straight when the steering wheel is centered and does not creep when the trigger is at neutral.
Whats do the Full and Low indicator lights mean? They are both always on. My Full light is red and my Low light is green? If anyone can help I would appreciate it, thanks
Really good question Scott, they are similar but unlike dual rates the endpoints adjustment allows you to set the throw for each direction individually. For example, you may need 50 degrees of servo travel to attain full left steering lock but only 30 degrees for full right, where D/R adjusts each side equally. We should do a video on endpoints, hope this answers your question.
Hello guys, my lc emb-t conroller broke on the second run, the wheel that make you go left or right. What controller do you recomend me ? Thanx a lot and cheers.
Great shop and staff. These videos are helping me get myself deeper in ... to it. :-) Really appreciate the amount of help we've been getting with stuff. Definitely got my business. Cheers PP
Every car has a different "normal" motor and steering direction, the reverse channel switches enable the controller to work with many different models. As for going backwards faster, swap your motor wires and reverse your throttle channel switch from whatever position it is in :-)
@@HobbiesDirect i am a newby with this an old dog new tricks 59yr old lol explain swap your motor wires ? got 3wires to the esc yellow red blue how should i swap these? also switched throttle from normal to rev direction is fixed just the power issue remains thank you! Chuck
@@HobbiesDirect i left the center-RED alone i swapped the BLUE and YELLOW and that did it!!! 2days of trying to figure it out and you really helped! Thank you! Chuck
@@HobbiesDirect ٠ Thnx for your answer, I reset it, it works fine, after 30 minutes, it goes back to falt and the car throttle forward alone, I rest again and it's fine for another 15 or 30 minutes,, should I buy a new one? Or if there is a way to hard reset settings in it?
One question . If i set the throttle trim do I need to calibrating again ? I can't figure it out .my sterling still not working and lean to one side . My rc brand is serpent XRS8 e
@@HobbiesDirect I solve the problem ald .thanks dude . Because I accidentally set the throttle so my car unble to reverse .after I set it back to neutral everything fine .
This video really helped me reviving my old nitro truggy after years of neglect and being away from the hobby
Awesome! Glad to hear you're up and running again :-D
As someone coming back to the hobby after over 30 years, these videos are fantastic and SO helpful!
So happy to hear it! And welcome back haha
Very helpful. You provide basic information that is hard to come by.
james my brother
Thank you so much! I have changed my motor and esc and had so many issues that have been solved with just one video of yours! King !
Really helpful video👍
I didn’t know what the buttons and controls meant. But now I do 😁
I'm learning new things here too.
I am here learning to prepare to buy my first race rc car ever. XRT for $1000 u.s. I used to love RC cars as a kid. Now I am 31 I can afford to buy a real RC car and not a toy.
Thank you so much had some reverse issues 😂 and you had the exact help I was looking for thx and happy holidays
And to you too!
So clear and easy to follow. Great video.
This is SUPER informative and succinct. Great work!
Cheers!
Thanks, all of your videos are clear and easy to understand 👍🏻
Luckily i didn't trow away that rc. My dorite was on zero and i had no steering on my rc. Now i know what the dorite (D/R)does. Awesome video!
Your videos are gold. Super helpful for a newbie to RC bashing.
Tnx Good video! simple but clear and covers all well. I had problem with my servo not working at all! now its ok! tnx mate!
This was a fantastic help many thanks .
Ya its help alot..
Thank you for the great info. I have a cheap RC boat that once work and no longer works. The board has power, but the remote does. New batteries didn’t help. Any suggestions on where to start?
Not knowing anything about the boat, might be time for a new radio system :-/
Cheers man, great video. Has helped us understand why was going on with my son RC car as he has the exact same controller. Cheers 🍻
I own this exact transmitter so thank you !
Nice, makes it easier!
All your videos are very helpful, thank you but can you do a vid on how to change the programable ESC settings and what difference they make to the RC. IE the running mode, brake drag force, punch and brake force. Thanks guys.
We absolutely will! It's in the pipeline of upcoming videos :-) Stay tuned!
Really wish he would've elaborated more on the throttle trim and how to adjust it
This video was super helpful, thank you.
Best advice 1 to turn 2 to burn best advice luv it you know when you hear something and you think bloody genius well this it. Thanks mate
Hi mate nice informative video can I ask your advice please. I have a original hornet RC off roader but I took out the battery pack to insert a ubec, would I now need to replace the ESC and controller? as I'm having trouble and confused me and can't move on to finish it. Any help appreciated. Thanks, mark.
You could go into more info about setting up the throttle for petrol/nitro rc cars
What about the cha tdd Gingrich part bro??? The back you forgot ?
This was helpful thanks
What would you say are some upgrades for the arrma 4s v2 rc car?
They are pretty tough stock. Just wait until you break something, then go for the upgrade 😁
Great video.
Awesome, very informational video ^^
Hell yeah, worked perfectly, thanks buddy
Bloody helpful. Thank you!
I have the same remote but I have two more extra diff erent things on my remote and it has TH D/R and ST D/R
Great video very informative! 👍 👍 💯
I knocked the throttle trim and it’s struggling to go in reverse. Do I calibrate the esc? What does he mean by set it to the neutral position
I don’t have fails I only have buttons. Any help? I messed with channel 2 and need to reset it back to factory
What does the TH trim do, whats a throttle channel?
There is a trim knob for each channel. The knobs are used to adjust the steering or throttle so that the car tracks straight when the steering wheel is centered and does not creep when the trigger is at neutral.
Very helpful!
Whats do the Full and Low indicator lights mean? They are both always on. My Full light is red and my Low light is green? If anyone can help I would appreciate it, thanks
Thanks, very helpful
My HPI TF-40 Transmitter has both D/R and Servo End Point Adjustments for both Steering Servo and Throttle Servo, do they both do the same thing?
Really good question Scott, they are similar but unlike dual rates the endpoints adjustment allows you to set the throw for each direction individually. For example, you may need 50 degrees of servo travel to attain full left steering lock but only 30 degrees for full right, where D/R adjusts each side equally.
We should do a video on endpoints, hope this answers your question.
Hello guys, my lc emb-t conroller broke on the second run, the wheel that make you go left or right.
What controller do you recomend me ? Thanx a lot and cheers.
Thanku my friend;That was meant to B I guess;Considering that I've got that Exact Radio! B Safe!👊
Hello my problem is throttle turns the wheels an steering does nothing can you help thank you
Great shop and staff. These videos are helping me get myself deeper in ... to it. :-) Really appreciate the amount of help we've been getting with stuff. Definitely got my business. Cheers PP
Hello, will Xbox controller work with 2.4 GHz, RC car with 2.4 GHz ???
Professional hand movement gesture and voice, great background as well. You need to up your lighting! It's too dark!
Hey bro please reply my rc car doesn't have the receiver as you have on your car what to do
What kind of car? What brand of receiver? What are you trying to do?
What should EPA L- R be set at
Does it have gyro inside?
why is my 4ch dumborc have to REVERSE throttle and steering swotches to work normally? ALSO forward is slow and reverse is FAST how do i fix that?
Every car has a different "normal" motor and steering direction, the reverse channel switches enable the controller to work with many different models. As for going backwards faster, swap your motor wires and reverse your throttle channel switch from whatever position it is in :-)
@@HobbiesDirect i am a newby with this an old dog new tricks 59yr old lol explain swap your motor wires ? got 3wires to the esc yellow red blue how should i swap these? also switched throttle from normal to rev direction is fixed just the power issue remains thank you! Chuck
You should be able to swap any two of them if it's not a sensored system - watch here: ua-cam.com/video/-hAoT1ZsBEI/v-deo.html
@@HobbiesDirect i left the center-RED alone i swapped the BLUE and YELLOW and that did it!!! 2days of trying to figure it out and you really helped! Thank you! Chuck
@@chuckneal5828 Awesome!
Good info
Very good!
But please do this with a losi controller
Its the one i have
NP adjustment, on my DHK D302T. Could anyone tell me what NP adjustment is ?
What does the lights mean
thank you
Welcome!
My green light is flashing what does that mean ?
Can somebody help me, when I turn off the controller or the car is out of range, it go full throttle forward instead of stopping, how to fix this
Sounds like your failsafe is set incorrectly, try resetting it, should fix the problem 🤙
@@HobbiesDirect ٠
Thnx for your answer, I reset it, it works fine, after 30 minutes, it goes back to falt and the car throttle forward alone, I rest again and it's fine for another 15 or 30 minutes,, should I buy a new one? Or if there is a way to hard reset settings in it?
And I really respect you for quick answer, other channels don't even care about followers, thnx a alot
Guys,need help wl s215 RC helli I got can't connect's with my Cat s52 android phone 10 what I need to do, till I can play
Got transmitter but still Heli going 0 reaction
1 to turn . 2 to burn. Nice
can someone send me the link of the car he use plz
My control light is not coming back on 😢😢😢😢
Batteries?
Thanks bro
Thx
My remote keeps beeping why idk please help?
Same problem with me please help
new subscriber sir, can you make a tutorial of GA-4H-TX on how to enable it when it doesn't work, hope you notice me. tnx sir
Need video from un boxing it to getcit going
Check the Quick Start Guide video on the channel :-)
One question . If i set the throttle trim do I need to calibrating again ?
I can't figure it out .my sterling still not working and lean to one side . My rc brand is serpent XRS8 e
If you change the throttle trim, it's a good idea to recalibrate as you have moved the neutral point. What's your steering not doing?
@@HobbiesDirect I solve the problem ald .thanks dude . Because I accidentally set the throttle so my car unble to reverse .after I set it back to neutral everything fine .
@@van_r2222 Nice!