Honda PCX 125 - CVT Removal / Installation - Variator, Clutch, Drive Belt, Rollers
Вставка
- Опубліковано 18 чер 2023
- In this video I am going to show you how to remove and install CVT parts - Variator, rollers, drive belt, clutch, cover, left skirt cover...
More tutorial videos on this model: bit.ly/MicPCX125
Are you subscribed? bit.ly/MitchsScooterStuffSub
T O O L S
Ratchet 3/8 drive - amzn.to/2hhmnUs
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
8mm socket 3/8 drive - amzn.to/2xLNVXU
10mm socket 3/8 drive - amzn.to/2xGuLSF
19mm socket 3/8 drive - amzn.to/2CiXNqo
22mm socket 1/2 drive - amzn.to/3aHoJ64
3/8 to 1/2 drive socket adapter - amzn.to/2HbrYnb
Breaker bar 3/8 drive - amzn.to/3lrjIWj
Torque wrench 10-150 lb/ft 1/2 drive - amzn.to/2GuMsHJ
Phillips #2 screwdriver - amzn.to/2fgdZDL
Variator / Clutch holder tool - amzn.to/2ZuYJEA
Dry lubricant spray - amzn.to/30bx91v
L I N K S
-Shop Mitch's Scooter Stuff Merch - bit.ly/MSSspreadshop
-Where I download my Music *Try it FREE for 30 days - bit.ly/MICTUNES
-Help support this channel! Paypal donation: bit.ly/PayPalMitchsScooterStuff
-Shop my Amazon picks (scooter tools / gear I use): bit.ly/MitchsScooterStuffSHOP
Follow Mitch's Scooter Stuff:
Instagram - bit.ly/ScooterIG
Facebook - bit.ly/FBScooterStuff
Check out my other UA-cam channel - bit.ly/MicBergsmaChannel
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/DESIGNBYERIK
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about my love my for scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Honda PCX 125 - CVT Removal / Installation - Variator, Clutch, Drive Belt, Rollers
• Honda PCX 125 - CVT Re...
Mitch's Scooter Stuff
/ mitchsscooterstuff
#mitchsscooterstuff #hondapcx #hondascooter - Авто та транспорт
Watch more tutorial videos on this model: bit.ly/MicPCX125
Many thanks, this is one of the clearest tutorials I have ever seen. All of that without annoying announcements or music.
Mitch the scooter manufactures should give you a Master Mechanics Certificate for taking apart and putting back together so many different scooters... Excellent job as always... hugs to you and Lori.
Thank you Ron! 😄
Thank you so much for this! I've never been much of a mechanic but have been learning to do as much of my own maintenance and repairs on my PCX 150 as possible and your channel has been a huge help!
Awesome! You’re welcome! 😄👍🏼
Maybe this is the definition of the PASSION ❤
Mitch moves quickly and makes it fun !
Hi Mitch you have amazing how to videos best I’ve seen on UA-cam.
Can you do more on the Honda pcx please would love to see more :)
Keep up the great work
Thank you! Yes more videos coming 😄👍🏼
Simple et efficace. Merci pour ce tuto 😉
Very best video I've ever seen. Thank you very much 😊.
The best channel on the UA-cam ❤
Thank you so much!
I am from Iran,thank you very much, very good.
Hi from Greece,thanks for the help great job .!!!
You're welcome!
🎉 भाई आप बहुत अच्छे काम करते बहुत बढ़िया है ग्राहक की दिल ❤❤❤❤ की तसल्ली की काम करते हो
😁🙌🏼🙏🏼
Ordered a custom seat from Thailand for my pcx, transformed the ride and comfort
Me too! PCX 150. I have knee problems and by putting one one of those seats where I can sit farther back I've actually been able to keep riding the thing instead of having to sell it!
@@mjoa1 best mod you can do to one I think. It’s the only thing that lets the bike down! What one did you get the flat style seat?
@@millymoo6575 Yeah a flat one that doesn't have a dish in it. Now I can sit farther back and straighten my legs, and I can use the upright forward foot position. Not only does that make it good for my knee, it sure does make the bike a lot more comfortable for long rides if you are 5'11" like I am. Very glad I got it.
I agree, it's the best thing I did to the bike other than putting michelin city grip tires on it. I'd like to experiment with some different variator weights now so this vid comes in very handy! Love my little PCX!
Thank you for the video, it is very detailed
You're welcome! :)
Very good video's.really helpfull thanks
You are welcome! 🤗
hey Mitch!! I love those PCX's....I would love to have one to go along with my Lance Cabo 125cc scooty!!
Hey, that would be awesome! PCX is so nice! :)
자세한 영상 잘봤습니다. 감사합니다
자가정비 해볼께요^^
😄👏🏼👏🏼 you will be fine 🙏🏼
Good job. On this perfection bravo
Thank you very much!
Complimenti un lavoro esemplare , grazie
Very nice job done 👍
Thank you! Cheers!
Very informative.. Thanks Mitch! Can you please do a clutch servicing video, clutch shoe replacement, clutch bearing replacement, etc.? Thank you!!
You’re welcome! I have some videos on that but different model… but a lot alike
@@MitchsScooterStuff Thanks Mitch! I will check...
Hey Mitch!
I love your channel.
Of all your scooters, no Honda Helix?
Don’t you know it’s the best scooter ever made? 🤡
Again I dig your channel, you do great work and always conquer!
Thank you so much! Shh I have Helix ;-) My cousin got it for me in Washington state and will ship to Maui in a few months :)
What spray did u used?
good video very helpful😀
😄🙌🏼🙏🏼
i did the same on my scooter but started having heavy vibration , what do you think that i did wrong while installing?
Good skill brothers❤😊
Mahalo!
Friend for a pcx 150. What should be the measures of the rollers
Brilliant
Thanks!
When are you posting more Kona videos?! I’m so looking forward to seeing the finished bus!!!
Very soon! This episode we are working on right now is difficult one 😅
Salut, te rog spune-mi ce role trebuie sa pun la un pcx 125cc model 2011,nu știu gramajul, sa fie echilibrat si sprint si viteza de croazieră, multumesc
Top😊
Excellent, and the 'silent movie' explanations work remarkably well! 7:44, the manual doesn't mention anything about dry lubricant on the rollers?
Thank you!
In this video I installed called sliders… not rollers… I used dry lubricant to help less wear on sliders, I have sliders on my burgman 400, over 40,000 miles no wear :)
@@MitchsScooterStuff would this be normal PTFE spray? I would be concerned that it might 'fume' at high temps and collect on the drive/driven plate, belt and clutch, similar to kitchen fumes settling on the top of kitchen cupboards.
Hi Mitch, love your videos. Ive recently brought a 2021 pcx and intended of replacing the eollers with slightly lighter ones.
I would like to know if you replaced any other parts at the same time as installing the dr pullys?
Congratulations on 2021 pcx! Not really, just replaced for dr pulley sliders, that’s it
Hi mitch do you have a video tuttorial for rear bearing replacement pcx 125 thank you
Hey, I don't have that one yet... you mean rear bearing on wheel?
My dear friend Mitch. Thank you for your instructional videos. There is something I want to consult with you about. I'm thinking of using lithium grease for the front variator. what do you say. Greetings from Turkey.
hi, you're welcome! Where exactly on front variation? You mean where rollers / sliders are?
I was happy to study all your PCX instructions, but I did not find a manual for adjusting the valve clearance in the engine. Do you do this at a Honda service center? How often they need to be regulated in practice (I know the service intervals honda).
Hey, I don't have valve clearance video on PCX yet but soon for sure
Czemu pasek, który z pozoru wydawałby się być taki sam w każdą stronę trzema montować jak pokazałeś?
My 150 cc dayang vorei scooter has a 13 gram baga, the torque is very good, but it starts at 4000 rpm, the speed dropped a little at 110. It needs to see 120 125. How many grams of cylinder ball bag would you recommend without losing too much torque?
I am not sure how to help on that scooter model… is 13g stock? Or did you change it?
Torque value front and rear honda lead125 Can I use the following values? Thanks.
Yes, absolutely
When do you change fuel filter on your Honda pcx?
Will do when it's time to change
The pully has 2 bearings inside, do we need fill grease into it regularly?
Grease should be there forever.... just check to make sure grease look good inside... I add grease when I take pulley apart to replace / clean
Hello Mitch's, how are you? I have seen some of your videos and they are great.
I am the owner of a CH 80 and
I wanted to ask you if you tested a specific filter, the Uni Air Filter NU-4106, since here in Argentina the original filter is not available. and imports are closed.
My idea, if possible, is to print it in 3D and I would like to know if it has a kind of grating, under the foam.
I wait your answer. It will be really helpfull. The opinion of an expert.
Hey, good and busy 😆 what about you…
Oh no I haven’t tested uni filter like that… there is no plastic inside of pod filter, just on front where you clamp it on the carburetor mouth. I haven’t messed with elite 80 air filter… maybe you should find Facebook group for elite 80 to get some help?
Thank you very much for the answer, I am already joining the honda elite 80 group. Keep up with your videos, they are great.@@MitchsScooterStuff
Hello there Mitch, I have a 2019 Suzuki burgman 400 and the oil sight glass is resuming oil, any idea on how to fix that..🤔
Thank you in advance!!
Best regards
Eddie..✌
Hey, hmm do you see any oil lean anywhere around the engine? What oil are you using?
Yamalube SAE 10w-40 4t engine oil AP
Hi. My honda PS burns a lot of oil. I needed to top up my oil every 100 miles. What could be the problem? Thanks
Wow hmm I would check around the engine for leaks.. how many miles on it?
Would that variator tool also work on the burgman 400?
Yup I used this same one for burgman 400 too! :)
@MitchsScooterStuff awesome and thank you for all you do! I'm taking a trip from Washington state to Minnesota doing some epic hikes along the way in July on a burgman I purchased site unseen but only has 1600 miles on it so I think I'll be ok 👍
Mitch, love your videos...and kinda envy your lifestyle out there on the island, riding year round...Canada SUX for riding year round ; )
I have a 2018 PCX150 with just over 4,000kms on it. Over the last 1,500kms I've noticed a progressively worse condition of the handlebar violently wobbling when I relax my grip or remove my hands completely while decelerating at low speeds, approximately 40kph/25mph. Are you familiar with this issue and how to remedy it? If anyone else familiar with the problem can chime in that would be great...appreciate any and all help.
Thank you! 😄👍🏼 move here so you can enjoy all year round haha 😛
Hmm I would check the tire psi… that could cause the wobble
@@MitchsScooterStuff Mitch, thanks for the reply. Tire pressure is good and everything seems tight up front. I guess I'll have to remove the plastics and check that everything is in fact torqued in the head.
bạn ơi hướng dẫn thay công tắc chân chống đi
I have a video how to remove the left lower panel on my channel where you can see the switch under there to replace :)
👏👏👏❗👍
Sir how can I reach out to you
leave a comment!
What grams are those dr pulley sliders?
13g
Mympcx won't go over 52pmh. I does need a new belt. But wondering if the Dr pulley will make it go faster ? It's a 2016 ty
Oh and. What best weight if There is different ones ? 👍
what's the torque?
Did you watch the video at all?
Укажи степень затяжки гаек вариатора
Did you see the whole video?
Was sprühst du da drauf?
Dry lubricant - link in description box
Does anyone knows if pcx forums is working or not.
Not working... I tried to go on there last few days
I think there down for good. Too bad nice site for information.
the dust inside that is harmful, wearing mask
Yeah
you inspire me to do with this part of my Pcx. I bought the tools and did it without any difficults. I cleaned the inside components and added some grease into the bearings. I will do it again in the future. thank for the instruction
😂
Здравствуй,сколько грамм ролики???
También me interesa
No fat,no fat
Fat?