I had the easy to access one a little loose, but I mostly just burped it the way I would a car. There wasn’t much air in the system, so didn’t take much.
Okay so I have a 2020 950 and it makes a clunk when taking off does your machine do this ? Also does it when coming to a stop sometimes. Only has 30 miles!
There is...I actually called Joel from MSC before I did it and he suggested it be done this way...so that’s what I did 🤷🏼♂️ I saw the “drain” label, but felt like that would take forever to come out that little thing. Lol
@@cooperadventures thank you, bro💪🏼 I’m just learning and figuring things out as I go. I know there’s a lot of other people who want to work on their machine, but might not know where to start...so I try to help out in giving them confidence and showing that they can do it💪🏼 Thank you for watching. I appreciate you!
You are probably ready to grease the wheel bearings soon. It's a great job, a bit stinky, but actually rewarding when it's all completed and put back together. Plus you get to buy a really cool new tool.
I have one on in literally every other video. Lol. I address the fact that my mic was dead at the end of the video and why the audio is the way it is. It happens sometimes 🤷🏼♂️
“I’m new! I don’t know what to do!” That reminded me of that Joe dirt scene on the oil rigs 😂😂 great video will be doing this soon!
🤣🤣🤣 thank you, Kooper! 💪🏼
Did you loosen the 2 8mm burp bolts while it was running?
I had the easy to access one a little loose, but I mostly just burped it the way I would a car. There wasn’t much air in the system, so didn’t take much.
Great video. Seams easy to do.
Thank you, Tony! It was pretty easy...I just made a giant mess 🤷🏼♂️🤣 Appreciate you watching, brother 💪🏼🙏🏼
Okay so I have a 2020 950 and it makes a clunk when taking off does your machine do this ? Also does it when coming to a stop sometimes.
Only has 30 miles!
Yes, mine does this in high gear when going slow
@@JustinTheCreator okay thanks man had me worried
@@brocksaunders7058 you’re welcome! It had me worried at first, too. Lol
Did you tighten the bleeder bolts before you started it?
I did. I just burped it like I would a car by squeezing the hoses and adding coolant as it dropped
Well, the one that was easy access was a little loose, but that rear one you basically have to lay your arm on the exhaust to reach it. Lol
@@JustinTheCreator lol burning your arms gets old quick.
@@drewswigart1257 yes. Yes it does. Lol
the link for the clutch kit video didn't pop up.
Well I’m gonna have to fix that
I just purchased one of these machines, At how many miles is it recommended to do a service?
I’ll have to look at the manual, but break in should be at 100 miles for oil and filter.
Great video bro
Thank you, brother 💪🏼
Doing your run cycles was this while you left your bleeders open? Plan on doing ours this weekend!!
Thanks 😊
Thanks for the info. In the manual they only mention to drain it from the plug. I took both out tho
There should be a plug labeled DRAIN right in the bottom side of the water pump, so you dont need to disconnect the hose. There is on my Zforce 1000
There is...I actually called Joel from MSC before I did it and he suggested it be done this way...so that’s what I did 🤷🏼♂️ I saw the “drain” label, but felt like that would take forever to come out that little thing. Lol
@@JustinTheCreator Sounds good and GREAT video(s). I'm about the same mechanically inclined as you, so relating !
@@cooperadventures thank you, bro💪🏼 I’m just learning and figuring things out as I go. I know there’s a lot of other people who want to work on their machine, but might not know where to start...so I try to help out in giving them confidence and showing that they can do it💪🏼 Thank you for watching. I appreciate you!
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Thank you for watching, Dr Mark! As always, I appreciate you brother 💪🏼
Is that a lifetime supply of Mud Traxx I see behind you on that shelf?? 🤔😅😅
Lol...it’s a little bit.
You are probably ready to grease the wheel bearings soon. It's a great job, a bit stinky, but actually rewarding when it's all completed and put back together. Plus you get to buy a really cool new tool.
Lol. Yeah, that’s on my list. Definitely not looking forward to it. Lol
@@JustinTheCreator I'll DM you on Facebook about it.
@@whiterabbit2786 awesome!
Need to spread the word about the brakes recall for the 950. Pretty dangerous
??? This is a new one to me? When was this released?
Just saw it today on CFMOTO channel UA-cam
@@wallacespangler8766 I’m gonna see if I can find anything on it
@@JustinTheCreator I have not seen anything anout a brake recall and it its not listed on the cf moto site that i can find , great video as usual
@@zforce950driver9 thank you, brother!!!
Sound quality could be better. You need a mic or something
I have one on in literally every other video. Lol. I address the fact that my mic was dead at the end of the video and why the audio is the way it is. It happens sometimes 🤷🏼♂️
Cant hear you bad sound
Yeah, I mention towards the end that my mic was dead...it gets better after the first little bit. Lol
Hahaha it all rushed out at once
It went everywhere 🤣🤣🤣