Thank you for sharing your ideas and knowledge im surprised you dont have more followers tho because you are probably one of the best teachers on here with all your information tips and tricks etc thank you for the info and sharing with us all
Bonjour Red ( juste une astuces pour tous) Pour ce qui est de votre mélange de peinture acrylique, pour ma part j'utilise du propylène glycol 99,5%, qualité pharmaceutique et je verse un bouchon de ce produit dans un flacon de 60ML que je dilue avec de l'eau j'ai au préalablement fait bouillir cette eau et je la stocke dans un bidon de 5 litres pour avoir de l'avance. Cela fait 20 ans que je procède ainsi et mes aéros qui sont en 0.15 ou 0.18 ne se bouche jamais et aucune pointe sèche et cela ralentit le séchage et améliore la fluidité au bout de l'aiguille, ce mélange et absolument fantastique car ce produit fait partie de toute les conception de peinture acrylique q'utilise les fabricant pour quelle ne seche pas dans les tubes ou les flacons. A+ hervé
sorry Rob ignore my last comment I have just seen your other vid which shows the answer to my question , (well I am 75 and just starting lol ) keep up the great work you am de bestest teacher . 😏
Like the content, the tutorials are great, the way you explain things is perfect. I have never used that application tape, but I shall give it a go. I do have a problem at the moment, as my paint curdles when I mix it with Isopropanol it seems to break up into little dots and gives horrendous problems, if I put it into the airbrush. Thank You.
Another great tutorial with plenty of info,love it 👌,you told me what tablet you use so I bought a android one for £80,I found I get alot of reflection on mine,do you have the same problem 🤔,any help would be great 👍 Plus I'd like to see you're custom work,even if you just did short videos 😉
It must be the reflection from your light source in your room mate 😉 that overhead light I am using at the moment is brilliant you can dim it and change the colour
Hi Rob I have an Ultra 2024 like you have in the video. Would I have to change the needle too if switched the cap to the H&S 0.4mm CR Plus Fine Line Chrome Cap or just the cap that screws on the end? Thanks for the videos and tutorials.
I like the custom painting. But the reason for the lack of viewers I think, is that the work involves a complete vehical. (Scarey). Rather than a piece of paper that can be thrown away if a mistake is made. (Just a thought). Great video's all the same. Thanks. 👍🏻
I'd rhino also lack of mainstream pop culture things eg latest movie posters, anime etc. Drawaholic literally colors in a projected outline with colored pencils as an example
hi Rob loving the vids you do great for explanation etc , being a total newbie and dense , what is the printer for in the pic does it mean that the transfer tape is printable ?🤔
Hi it just means that we can all print an image as in the picture with the printer 🖨 Then the other picture is with an airbrush and it means now try this
Love your video's, ive been airbrushing off and on for a few years , in the background of your vedio's on the wall you have your airbrushes displayed in black foam, how did you get the foam cut out so perfect ?
Great work Rob and it looks like you have shaved and had a hair cut🤫 Does your good lady help with your filming as it must be the only time she gets to see you - or is that not a bad thing?🥴
This is the one I have but you can get your images across to your paper cheaper ways www.amazon.co.uk/TOPTRO-Projector-Bluetooth-Keystone-Compatible/dp/B09YQ521G3
No 1 for airbrush tuits anywhere……period! 🇦🇺😎👍
Thank you really appreciate that 👍
Thank you for sharing your ideas and knowledge im surprised you dont have more followers tho because you are probably one of the best teachers on here with all your information tips and tricks etc thank you for the info and sharing with us all
Thank you for your time and sharing your expertise. 😊
Your welcome thank you for watching
Bonjour Red ( juste une astuces pour tous)
Pour ce qui est de votre mélange de peinture acrylique, pour ma part j'utilise du propylène glycol 99,5%, qualité pharmaceutique et je verse un bouchon de ce produit dans un flacon de 60ML que je dilue avec de l'eau j'ai au préalablement fait bouillir cette eau et je la stocke dans un bidon de 5 litres pour avoir de l'avance. Cela fait 20 ans que je procède ainsi et mes aéros qui sont en 0.15 ou 0.18 ne se bouche jamais et aucune pointe sèche et cela ralentit le séchage et améliore la fluidité au bout de l'aiguille, ce mélange et absolument fantastique car ce produit fait partie de toute les conception de peinture acrylique q'utilise les fabricant pour quelle ne seche pas dans les tubes ou les flacons. A+ hervé
Hi Rob , I'm just getting started and your videos are very helpful and much appreciated
Thank you really appreciate that 👍
sorry Rob ignore my last comment I have just seen your other vid which shows the answer to my question , (well I am 75 and just starting lol ) keep up the great work you am de bestest teacher . 😏
That's OK 👍 if you need any further info or help along the way just drop a message
Your doing a brilliant job Rob, keep it up fella
👍👍👍👍 I like your explanations that you do for all your youtubes. 👍👍👍👍
Thank you try and keep it straight to the point and as easy as I can
This is so much fun and educational to watch. Great job once again!
Thank you glad you enjoyed it 👍
Hi Rob another very intuitive video for us beginners, so much info, Look forward to some more in the future.
Glad you enjoyed it thanks for watching and the feedback 👍
Like the content, the tutorials are great, the way you explain things is perfect. I have never used that application tape, but I shall give it a go. I do have a problem at the moment, as my paint curdles when I mix it with Isopropanol it seems to break up into little dots and gives horrendous problems, if I put it into the airbrush. Thank You.
What paint are you using 🤔
Very nice and funny in the same time.
Thank you glad you enjoyed it 👍
Love the content your a amazing teacher. Love to watch some custom stuff too
Thank you 👍 I may just film the next project 🤔
The is so cool looks like a cartoon you see on tv
Glad you like it thank you for watching and really appreciate your feedback
Thank you for sharing I’m still learning and and have given great tip
Another great tutorial with plenty of info,love it 👌,you told me what tablet you use so I bought a android one for £80,I found I get alot of reflection on mine,do you have the same problem 🤔,any help would be great 👍
Plus I'd like to see you're custom work,even if you just did short videos 😉
It must be the reflection from your light source in your room mate 😉 that overhead light I am using at the moment is brilliant you can dim it and change the colour
Hi Rob I have an Ultra 2024 like you have in the video. Would I have to change the needle too if switched the cap to the H&S 0.4mm CR Plus Fine Line Chrome Cap or just the cap that screws on the end?
Thanks for the videos and tutorials.
Hi all you need is the fluid cap and the prong cap keep your needle
Mukka your serious art is banging your cartoon art is just as good , enjoying your channel imensely thankyou brother 😊😊😊😊😊😊
Your welcome bro 🙏
I like the custom painting. But the reason for the lack of viewers I think, is that the work involves a complete vehical. (Scarey). Rather than a piece of paper that can be thrown away if a mistake is made. (Just a thought). Great video's all the same. Thanks. 👍🏻
Yes totally agree with you 👍
I'd rhino also lack of mainstream pop culture things eg latest movie posters, anime etc. Drawaholic literally colors in a projected outline with colored pencils as an example
Just to add in for views, more pop culture stuff like latest movie, anime, comics etc. May help with YT algo
👍
hi Rob loving the vids you do great for explanation etc , being a total newbie and dense , what is the printer for in the pic does it mean that the transfer tape is printable ?🤔
Hi it just means that we can all print an image as in the picture with the printer 🖨
Then the other picture is with an airbrush and it means now try this
Love your video's, ive been airbrushing off and on for a few years , in the background of your vedio's on the wall you have your airbrushes displayed in black foam, how did you get the foam cut out so perfect ?
Hi its this here's the video of me doing it 🙂
ua-cam.com/video/s_fhV4hbOzA/v-deo.htmlfeature=shared
Hi Rob any chance you could let me know where you got the 0.28 & 0.45 headset from for the ultra
Many thanks
Excellent videos and how you teach it
Your best bet is to drop them an email on this site and they will sort it for you
harder-airbrush.net/
Great video once again thanks.me been stupid again can find link to reference photo again would be great full if you could help.
There you go 👍
www.pinterest.co.uk/pin/94575660919154009/
👍
2 99s with a flake please lol😂
Hi Rob I’m painting on metal how do I stop the paint from spidering every time I try to go in close? Is it pressure? Too much paint?
Hi can be both start with your pressure drop it right down then have a look at your paint mix
Great work Rob and it looks like you have shaved and had a hair cut🤫 Does your good lady help with your filming as it must be the only time she gets to see you - or is that not a bad thing?🥴
Put it this way I am having a bed delivered next week for the studio 😁😳
What projector do i need to project the image on to my paper
This is the one I have but you can get your images across to your paper cheaper ways
www.amazon.co.uk/TOPTRO-Projector-Bluetooth-Keystone-Compatible/dp/B09YQ521G3
What tablet do you use please .thnx
Hi its a Samsung galaxy s6
@@dredfxcustompaint thank you .