Hey, mate! If you have problems connecting to wireless Android Auto you can reach out to us through our website's live chat or you can reach out to us via email at hey@vhedia.com.au we'll gladly assist you.
Just wanting to confirm, does this work with the Rockford Fosgate amp/sub setup? Also, does the unit power off with the key or remain powered on like some other tablet based installations? Cheers.
Hi there, what is the model of the factory unit you took out? I can't find it anywhere on the internet. Could I get a photo of the numbers on the top of the old unit?
Hi, We sure do we have a range that we will be releasing soon but what we suggest is using a micro amp that can fit behind dash where stereo is and then a underseat sub and amp. Keep a eye out for the package. Cheers
Hey, mate! Personal recommendations would be Bilstein, Liqui Moly, or Shell oils but would be best to ask your local auto shops. We sell mostly head units and car cameras! If you have any inquiries on that field, we'd be happy to help!
Hey I'm curious why you needed the Canbus for steering wheel controls etc? I have a 2016 NX with the same screen (non-rockford) and was under the impression the Canbus was just for the amp control?
Amp control is just one of the uses of a CAN bus system. It's like a terminal to communicate with all the ECU/electrical systems applicable to reduce the complexity of the wirings.
Your factory functionalities will work absolutely like your reverse camera, steering wheel and climate cotrols. Here's the link for the product: vhedia.com.au/product/mitsubishi-pajero-head-unit-2006-2014-ns-nt-nw/
Hi, Do u have an inbuilt Rockford fosgate Amp retention module like Aerpro mito-02 adapter built into your head units ? Btw mine is an 07 Pajero exceed with rear entertainment unit but I had to use the Mito-02 adapter to get my clarion vx506au unit to work ie turn amp on. But Sound isn’t as good as it would be without mito adapter and it often only puts sound to rear and or front with less or no 2nd row sound. And wiring is a complete messy nightmare. Do you have a better amp retention plug in module for other units like mine ? TIA
Hey, mate. We don't have an adapter for the amp itself but I reckon our head units for the Pajero Exceed work with the factory amp and still utilize it. Can just adjust audio thru the DSP on our units.
Hi, We usually do not sell them as they have our head unit plug at the end and will not fit any head unit. Also the CAN BUS if you need one needs to have the correct software on the head unit. Cheers
I have an NW with the reverse camera screen in the rear view mirror, where are the wires to connect this or do I need to run a new wire and new rev cam?
Hey, mate. Please check this article out: vhedia.tawk.help/article/m-series-mitsubishi-control-settings If it doesn't work. Please reach out to us via live chat, phone, or email us ay hey@vhedia.com.au so we can assist you further.
Hey Mate, jump onto our website at vhedia.com.au/product-category/mitsubishi-head-units/pajero/ Any questions you can jump on our live chat from the site or email hey@vhedia.com.au
Android still wired... Good presentation ,short and straight forward... Good Job.
Hey, mate! If you have problems connecting to wireless Android Auto you can reach out to us through our website's live chat or you can reach out to us via email at hey@vhedia.com.au we'll gladly assist you.
Thanks. That's cool that steering controls working straight away. I saw usually have to program them.
Hey, mate. Yeah there are some cases where you'll have to program them or set the CANBUS but all should work easy as. Cheers.
Hi there, great video, my Pajero is same Series 4 as in your video but 2013 with camera in rear view mirror, is the procedure the same?
Hey, mate. Rear view mirror camera might not be retained.
Just wanting to confirm, does this work with the Rockford Fosgate amp/sub setup? Also, does the unit power off with the key or remain powered on like some other tablet based installations? Cheers.
Hi, Yes works with factory Rockford system. Unit goes into sleep mode low power draw so when key comes on it quick boots 2-3 seconds. Cheers
Hi there, were the USB retention cables sourced with the unit or elsewhere ??
Hey, mate. We put USB retention cables on the kit when you purchase a head unit!
All these loose wires are going to make a lot of noise on rough surfaces.
The tutorial video is purely for showing how to install the head unit. You can clean up the wirings after install and shouldn't be a problem.
Hi there, what is the model of the factory unit you took out? I can't find it anywhere on the internet. Could I get a photo of the numbers on the top of the old unit?
Hi, Not sure on exact model number of OEM radio. Cheers
Good concise info here. Would you have any suggestions on where an amplifier could be installed in the Pajero?
Hi, We sure do we have a range that we will be releasing soon but what we suggest is using a micro amp that can fit behind dash where stereo is and then a underseat sub and amp. Keep a eye out for the package. Cheers
@@VhediaVehicleMedia That's great. Look forward to hearing back from you.
Cheers, mate. Can subscribe to our mailing list for any updates on our upcoming/existing products. Just visit our website www.vhedia.com.au!
Could you tell me, what gearbox oil and oil separator should be used for Mitsubishi Pajero v93 manual handwaves in 2009?
Hey, mate! Personal recommendations would be Bilstein, Liqui Moly, or Shell oils but would be best to ask your local auto shops. We sell mostly head units and car cameras! If you have any inquiries on that field, we'd be happy to help!
Hey I'm curious why you needed the Canbus for steering wheel controls etc? I have a 2016 NX with the same screen (non-rockford) and was under the impression the Canbus was just for the amp control?
Amp control is just one of the uses of a CAN bus system. It's like a terminal to communicate with all the ECU/electrical systems applicable to reduce the complexity of the wirings.
Where would I find a wire harness? I have a built in amp ?2008 Pajero
Hey, mate. We don't sell just the harness. It's included in our head unit kits.
Hi guys, do you have one for NT exceed 2011 with rockford fosgate? Will my factory camera still work? Thanks
Your factory functionalities will work absolutely like your reverse camera, steering wheel and climate cotrols.
Here's the link for the product: vhedia.com.au/product/mitsubishi-pajero-head-unit-2006-2014-ns-nt-nw/
$978.. someone has lost their mind
Does the facia panel come in a gloss black like my 2016 NX GLS have ?
Hi, Not at the moment but I think we can get them. Reach out via email and we can sort you out. Cheers
Hi,
Do u have an inbuilt Rockford fosgate Amp retention module like Aerpro mito-02 adapter built into your head units ?
Btw mine is an 07 Pajero exceed with rear entertainment unit but I had to use the Mito-02 adapter to get my clarion vx506au unit to work ie turn amp on. But Sound isn’t as good as it would be without mito adapter and it often only puts sound to rear and or front with less or no 2nd row sound. And wiring is a complete messy nightmare.
Do you have a better amp retention plug in module for other units like mine ?
TIA
Hey, mate. We don't have an adapter for the amp itself but I reckon our head units for the Pajero Exceed work with the factory amp and still utilize it. Can just adjust audio thru the DSP on our units.
Be good if you had a piano black facia
Can reach out to us via live chat or phone call so we can check if we can do something. Cheers!
do you have part numbers for the 2 wiring harnesses you are using?
Hi, We usually do not sell them as they have our head unit plug at the end and will not fit any head unit. Also the CAN BUS if you need one needs to have the correct software on the head unit. Cheers
I have an NW with the reverse camera screen in the rear view mirror, where are the wires to connect this or do I need to run a new wire and new rev cam?
Hi, You can tap into I think the wires are in the kick panel we can help out find them if you send some pics via email. Cheers
What do you do with the old oem units? Got any spare ones for sale?
Hey, mate. We don't have them any more and we aren't selling OEM units. Sorry.
My review camera shows up on my rear view mirror. will this remain the same?
Hi, Yes will do mate, and if you want we can help you tap into it so it shows on screen and on rear view mirror. Cheers
@@VhediaVehicleMedia Many thanks for quick response. What is your email address please
You can contact us thru hey@vhedia.com.au
My Speedo stopped working after installing the android unit. Has anyone faced this issue or fixed it?
Hey, mate. Please check this article out:
vhedia.tawk.help/article/m-series-mitsubishi-control-settings
If it doesn't work. Please reach out to us via live chat, phone, or email us ay hey@vhedia.com.au so we can assist you further.
Speedometer not working after android installations
Hey, mate. Sorry to hear you have some hiccups after installation. Can reach out to us via phone, chat, or email and we'll help you sort this out!
How do I get this kit please ? Ps I have the Rockford fosgate. 2012
Hey Mate, jump onto our website at vhedia.com.au/product-category/mitsubishi-head-units/pajero/
Any questions you can jump on our live chat from the site or email hey@vhedia.com.au
Hello, I have the same problem, what did you do to fix it?
Hey, mate. If it's a head unit from us at VHEDIA you can reach out to our live chat or email us at hey@vhedia.com.au so we can help you sort it out.