best setuo video i have watched so far. I had to cut my tape short to make work #21, so I have done something wrong but I did see other people cutting their tapes short. I am going to follow you steps and redo my sight in and see if I can actually install the full tape. Saw another video today that talks about the bonus pin which I am glad you can actually use a 4th pin four. It made no sense to make a high end sight with a guessing pin? UV did a poor job marketting that 4th pin as they called it a fun pin or something. Glad to see i can swap the pin out!
I’m also running into a problem. I had my peep sight to now the first go around, got it moved up and still having the problem with my tape sitting to low on the rail that I can’t screw it on. All these videos of people sighting theirs in less than an hour has me mind blown. Wish there was a better way than having to go from 20 yards right to 60.
Just picked up the UV slider, I switched from an HHA tetra max, it’s an awesome sight but wanted to see what the slider is all about. I was a little confused about the sight in process for the slider and was having a little trouble with finding my elevation. But thanks to your video, my confusion was cleared up and I just have to get back outside and restart the sight in process for peace of mind. Thanks for making this video, it was well articulated and easy to follow. Plus you just gained a new follower. 🤙🤘🏻
Just use a left handed sight tape on the other side for your bonus pin. Just put the indicator on the yardage is. My bonus pin is 63 yard and I’m good out to 130 with my setup and all the yardages are good, just shooting with the bonus pin
awesome video don't hurt your arm elbow up when u draw way easier different muscles more natural your elbow ends up in right position need to do that as u draw back
@@SandSArchery Another great video by the way, Justin. thank you. I noticed the draw action as well and figured you had a shoulder problem. I draw same as you - in part I do it that way so as to limit motion when an elk is in close (lots of folks make a lot of bow movement at the archery range, pointing the bow at the sky, etc.). I also hurt my shoulder in a fall when chukar hunting a few years ago and it is just now recovering.....I've tried to draw "properly" but that isn't going to happen anytime soon. I'm just grateful that I can still draw 65-70 lbs right now - no doubt you feel the same.
Great video man. Are you or anyone else running into the problem with commiting to a sight tape. I have shot over 100 arrows and still havent decided on a sight tape. I have my 20 set just fine but i think im being to picky cuz im waiting tell i literally stack 6 or more arrows perfectly at 60 before i choose a tape. Amazing sight tho but terrible customer service probably one of the worst in the country lol
With being able to adjust each pin and where they correspond on the sight, when you scroll down to let’s say 60 yards on the middle pin, do the top and bottom pins accurately shoot at the corresponding yardage on the sight tape or do those “default” numbers go out the door once you move the sight up or down?
They will shoot the corresponding yardages, as long as they are sighted in for the correct distance in the default position and the sight tape is correct, any pin will work at what ever distance
So basically it’s just a 20,30 and 40 yd sight. The bonus pin on bottom all lands out yardage wise however fast the bow is? I was hoping it would be a 50 yd pin. Guess not.
Good information on the sight, but I made it to about 3:25. Your draw and slapping that trigger is out of this world. I'm sure you make it work, but it's like nails on the chalkboard for me.
Did the blue dot pop off on the first 60yard shot? What were you aiming at then for your group?🤷♂️ I wish this sight allowed the 20 yard to be at the farthest roll up location. Allowing you to return to start without even having to look
My blue dot was just some painters tape. Totally agree with you, doesn't make sense that some of these sights don't allow you to have a default set position. You really have to pay attention to your sight tape or it could definitely end bad.
@@Rossmanchurn Hey man, So after shooting the new 3 pin vertical cartridge, I set the top pin to 20 yards, middle pin ended up at 31 and the bottom pin ended up at about 42.5. So about a 11 yard difference on my setup. 70lbs, 29" draw, 480 grain arrow, and 271 FPS. I'll be releasing the video soon. thanks
So my site tape ended up being 17. So I put it on the plate and the plate is already bottomed out on the bottom so I can’t get to 60. Am I missing something?? Can’t move the tape down any further either without cutting it.
Bought this sight last week. I’ve had the hardest time getting it sighted in. Anyone else run into the problem of your sight bar siting to low on the slide it can’t be screwed down. I even got my peep moved up and that didn’t work. I’ve followed these steps to a T and still having the same problem? Any help? Thanks!
@@AndrewBellotto yeah so I set the sight bar on the slide then aligned my sticker with the indicators. The sticker was still at the very bottom of bar though. The screw was almost covering the sight tape number. Hope this makes sense and helps ya.
@SandSArchery when you sighted that 60y pin did you adjust the elevation so you were shooting groups at the bullseye, or just the groups that were high?
after I shot the fixed middle pin at 20 and got that set, I moved back to 60 yards and shot the same pin to get the elevation set. I dialed out until the elevation was good. In the video I was shooting a small blue dot above the bullseye just to help me focus on a small point, Yellow target with a yellow pin was hard to focus on, so thats why I was shooting the blue dot. Once that was done I can than look at my indicator and see what sight tape I needed to install.
@@SandSArchery Perfect. That’s what I thought you did, but wanted to clarify that you were just getting the elevation dialed. I just ordered mine. This is one of the best and most straight forward videos on how to properly set this sight up. I appreciate you taking the time to do so, and the response.
Best video for sighting in the slider! Better than UV’s instructions
Awesome video, much appreciated! Set up and dialed in no time!
this is the best and easiest explanation on youtube. thank you
The bonus pin does have a indicator. You have to install it. It a daul indicator that replaces your single fixed.
Great straight to the point video!
best setuo video i have watched so far. I had to cut my tape short to make work #21, so I have done something wrong but I did see other people cutting their tapes short. I am going to follow you steps and redo my sight in and see if I can actually install the full tape. Saw another video today that talks about the bonus pin which I am glad you can actually use a 4th pin four. It made no sense to make a high end sight with a guessing pin? UV did a poor job marketting that 4th pin as they called it a fun pin or something. Glad to see i can swap the pin out!
I’m also running into a problem. I had my peep sight to now the first go around, got it moved up and still having the problem with my tape sitting to low on the rail that I can’t screw it on. All these videos of people sighting theirs in less than an hour has me mind blown. Wish there was a better way than having to go from 20 yards right to 60.
Great video, easy to follow and got me all dialed in- thanks man!
Great job ! I've watched all the slider videos and this was the most informative.
best video to sight in the UV Slider, all you need to know, A+++
Great video, very well delivered, easy to follow and insightful.
Just picked up the UV slider, I switched from an HHA tetra max, it’s an awesome sight but wanted to see what the slider is all about.
I was a little confused about the sight in process for the slider and was having a little trouble with finding my elevation.
But thanks to your video, my confusion was cleared up and I just have to get back outside and restart the sight in process for peace of mind.
Thanks for making this video, it was well articulated and easy to follow. Plus you just gained a new follower. 🤙🤘🏻
Wow this video make me order this sight right. Best informative video I have seen
Thank you for taking the time to watch. We appreciate it.
@@SandSArchery is this process the same if using UV new vertical 3 pin?
Super simple everything we needed awesome video man!
Great Video! Love my UV slider, been using Night Sight Tapes with it and I love the combo.
I'm not sure how I've missed this channel for this long, but I'm glad I found it!
This video flawlessly helped me sight in my new slider, thanks man!
Excellent video! I got my second guy in today about to start the process! Thank you for the video!
Best sighting in video. Thank you
Thanks for watching. Let us know if you have any questions
Just use a left handed sight tape on the other side for your bonus pin. Just put the indicator on the yardage is. My bonus pin is 63 yard and I’m good out to 130 with my setup and all the yardages are good, just shooting with the bonus pin
awesome video don't hurt your arm elbow up when u draw way easier different muscles more natural your elbow ends up in right position need to do that as u draw back
Labrum surgery back in the day, this is the only way that it doesn't hurt to draw.
@@SandSArchery Another great video by the way, Justin. thank you. I noticed the draw action as well and figured you had a shoulder problem. I draw same as you - in part I do it that way so as to limit motion when an elk is in close (lots of folks make a lot of bow movement at the archery range, pointing the bow at the sky, etc.). I also hurt my shoulder in a fall when chukar hunting a few years ago and it is just now recovering.....I've tried to draw "properly" but that isn't going to happen anytime soon. I'm just grateful that I can still draw 65-70 lbs right now - no doubt you feel the same.
What a great video. Thank you for making this. Have you had any experience using Precision Cut Archery with this sight yet?
Thanks
Great video man. Are you or anyone else running into the problem with commiting to a sight tape. I have shot over 100 arrows and still havent decided on a sight tape. I have my 20 set just fine but i think im being to picky cuz im waiting tell i literally stack 6 or more arrows perfectly at 60 before i choose a tape. Amazing sight tho but terrible customer service probably one of the worst in the country lol
I’m the same way but I’m prone to thinking it’s just me torquing the bow vs the tape being wrong
With being able to adjust each pin and where they correspond on the sight, when you scroll down to let’s say 60 yards on the middle pin, do the top and bottom pins accurately shoot at the corresponding yardage on the sight tape or do those “default” numbers go out the door once you move the sight up or down?
They will shoot the corresponding yardages, as long as they are sighted in for the correct distance in the default position and the sight tape is correct, any pin will work at what ever distance
I may have missed it, but which pin is the floater pin? Middle?
So basically it’s just a 20,30 and 40 yd sight. The bonus pin on bottom all lands out yardage wise however fast the bow is? I was hoping it would be a 50 yd pin. Guess not.
Good information on the sight, but I made it to about 3:25. Your draw and slapping that trigger is out of this world. I'm sure you make it work, but it's like nails on the chalkboard for me.
Did the blue dot pop off on the first 60yard shot? What were you aiming at then for your group?🤷♂️ I wish this sight allowed the 20 yard to be at the farthest roll up location. Allowing you to return to start without even having to look
My blue dot was just some painters tape. Totally agree with you, doesn't make sense that some of these sights don't allow you to have a default set position. You really have to pay attention to your sight tape or it could definitely end bad.
What do you do with the new vertical pin cartridge? Can you get that to dial in to 20-30-40? Or would it be more like 20-35-55?
I'll film this today and get back with you. Great question.
@@SandSArcheryawesome! Just subscribed ❤ looking forward to the next video, thanks man!
@@Rossmanchurn Hey man, So after shooting the new 3 pin vertical cartridge, I set the top pin to 20 yards, middle pin ended up at 31 and the bottom pin ended up at about 42.5. So about a 11 yard difference on my setup. 70lbs, 29" draw, 480 grain arrow, and 271 FPS. I'll be releasing the video soon. thanks
@@SandSArchery thank you for getting back to me! Looking forward to the video!
So after all the sight in process is the middle fixed pin now the floater pin beyond 40 yards?
I ran out of room to go up trying to get my 20 yard mark with my middle pin. Can you please help
So my site tape ended up being 17. So I put it on the plate and the plate is already bottomed out on the bottom so I can’t get to 60. Am I missing something?? Can’t move the tape down any further either without cutting it.
Having the same problem and same sight tape… not sure what the problem is.
@@miguelcalderon5228 so my buddy told me to move the scope housing down. I’m assuming you have a shorter draw length? I’m at 27.5
@@SwampLifeAdventures appreciate ya. I’m at 27.5 as well
@@miguelcalderon5228 yeah I think you have to move the whole scope housing down
Love the videos but this dudes draw cycle always looks just painful.
Bought this sight last week. I’ve had the hardest time getting it sighted in. Anyone else run into the problem of your sight bar siting to low on the slide it can’t be screwed down. I even got my peep moved up and that didn’t work. I’ve followed these steps to a T and still having the same problem? Any help? Thanks!
Have you figured this out? I am having this same issue
@@AndrewBellotto yeah so I set the sight bar on the slide then aligned my sticker with the indicators. The sticker was still at the very bottom of bar though. The screw was almost covering the sight tape number. Hope this makes sense and helps ya.
How's the weight compared to the spot hog stuff?
Punching that trigger much lol … I used to be the same until I got into shot iq
Draw length so to short…..
@SandSArchery when you sighted that 60y pin did you adjust the elevation so you were shooting groups at the bullseye, or just the groups that were high?
after I shot the fixed middle pin at 20 and got that set, I moved back to 60 yards and shot the same pin to get the elevation set. I dialed out until the elevation was good. In the video I was shooting a small blue dot above the bullseye just to help me focus on a small point, Yellow target with a yellow pin was hard to focus on, so thats why I was shooting the blue dot. Once that was done I can than look at my indicator and see what sight tape I needed to install.
@@SandSArchery Perfect. That’s what I thought you did, but wanted to clarify that you were just getting the elevation dialed. I just ordered mine. This is one of the best and most straight forward videos on how to properly set this sight up. I appreciate you taking the time to do so, and the response.