PERFORMANCE UPGRADES for MITSUBISHI PAJERO, TRITON and PAJERO SPORT 2024!
Вставка
- Опубліковано 11 січ 2024
- Hey guys, welcome to the first video of 2024! We kick this one off by partnering with Offroad Daily, which supplies performance upgrades for Mitsubishi Motors such as the Pajero, Triton and Pajero Sport! These products are now live on the website to check out!
🌐 Grab some cool accessories here: budget4x4life.com/
📧 For inquiries, email us at: info@budget4x4life.com
✅ Follow us on Instagram: / budget4x4life
✅ Like us on Facebook: / budget4x4life
#performanceupgrades #mitsubishipajero #mitsubishi - Авто та транспорт
![How to squeeze extra 57HP out of 3.8L Pajero! [Dyno Testing]](/img/n.gif)
Thanks for sharing 👍😎
Cheers 💯
Thank you❤🎉
Welcome 💯🙌🏼
Thanks Dee.
You're welcome mate 💯
Thks 😊
💯🤙🏼
Great 🎉
Yeww 🔥
Good one
🔥🔥🔥
The MN triton recalled and used a different pressure radiator cap. Can this radiator cap be used on the aluminium 3 core radiator.
Thanks.
Thanks for this. Those engine temps u mentioned are with your 5 core radiator so I’m guessing the 3 core won’t be as good? Was those temps before or after u replaced the intercooler? Some paj guys say fitting a fmi takes away efficiency of the radiator. Also that oil cooler is a replacement of original or an additional one?
Hey mate. 3 core will be similar, maybe 5° difference if that. The radiator just helps the temps be more consistant so when towing etc will go up 5 to 10 degrees but won't go up and down or just up like the factory one does. Was after the intercooler. Warm up temp will still be the same though. It depends what intercooler. If you just do the upgraded one in factory position you won't have any dramas. Mine as well no worries. The Johnny tig one though covers the whole radiator so no surprise that it will heat up and hence I don't recommend them and rather hpd for front mount. The aux cooler is an auxiliary one and also a video about it on the channel cheers 🙌🏼
Do you have an upgraded front grill for the NX Pajero? That one at the start of the video looks cool and is totally different to what's on mine (which has been pushed out of shape due to the bullbar). Definitely be after some of these upgrades soon as my NX is going on 8 years old now but still going strong! Cheers.
Hey matey. Can definitely get some in for you or if you like my grill I can source it for you. Just send me an email if interested 🙌🏼💯 Awesome, many years for it to come 🔥
Hey mate, thanks for the video again. Quick question, did the nuts inside the hood loosen during usage ? I am about to install it but I am worried if the nut inside the hood will loosen and will be lost lol
I am thinking to apply Threadlocker on the hood bolt/nut. What are your thoughts ?
Hey mate the bonnet struts have held up till now no worries. Not a bad idea to put thread locker on though 👌🏼
@@budget4x4life tks again for the quick reply
With the gas struts on the bonnet how does it go with closing? Can you still drop it from about 20cm high and it locks shut or do you need to lower it all the way down and then push down on the bonnet for it to lock closed?
Hey mate. You have to bring it down till about 10 or more cm away and give it a little shut. No biggy 🙂💯
Cool plate number 😂
Thanks mate haha all for the show 😄🔥
Can those struts work on gen 3 Pajero?
Unfortunately different
How much better is a 'thicker' intercooler, really?
🎉🎉🎉🎉
Lower temp better fuel consumption...so I say really good 🙌🏼💯✔️
7:28 u still rising the steel arm !!! Maybe not trust the bonnet strips 😅😅😅
Had to lift it up to get the grill off 👌🏼
Thanks for sharing. I sent you a message on Instagram. I have a shorty NS too and on Sunshine Coast. Keen to catch up
That's awesome mate, will check it out 🙂🤙🏼