Dixie Narco 501E & 276E Vending Machine - How To Load Drinks And Prime
Вставка
- Опубліковано 28 лип 2024
- Loading drinks into a Dixie Narco 501E and 276E drink vending machine can be confusing for the first time vending machine operator. Alex of Vending Machine Support shows you the correct steps to follow when loading and priming your Dixie Narco soda vending machine. This video will help you get your pop vending machine ready to be placed into operation.
☀ Affiliate links that help support the channel ☀
☞ Purchase items from the Nayax Online Store: nayax.pxf.io/vms
Be sure to use promo code VMS at check out and receive a discount on your purchase!
♨ Buy Me A Coffee: www.buymeacoffee.com/alexvarcoe
-Chapters-
00:00 Intro
00:08 Opening the door
00:43 How to loading the wide column
01:08 Loading 12oz cans into the wide column
01:58 How to load the narrow columns
02:09 Loading 12oz cans into the narrow column
02:31 The sold out flap
02:57 Loading 16.9oz bottles into the narrow column
03:54 Priming the drink vending machine columns
04:20 Locating the service mode button
04:44 Navigating the menu
05:16 Motor test function (MT-1)
06:36 Loading coins into the coin changer
07:14 Placing the drink vending machine into sales mode
07:26 Summary
#vendingmachine
#vendingmachinerepair
#vendingmachinesupport
#vendingmachinebusiness
If you find this video helpful, please LIKE and SUBSCRIBE for more helpful vending machine support videos.
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
I just bought my first 276e. Thanks for all ur videos
Much help
Glad to help
Just wanted to tell u thanks I recently took over a vending business in Madison Wisconsin we we r newbie's your video's have help us sooooo much thank goodness for your expertise you have walk me through so many issues and I've learned a ton just wanted to say thanks, Matthew (from Madison WI)
@heather herian Thank you so much for the kind words. I am pleased to hear that you have found these videos useful. It is comments like yours and the many others that keep me inspired to continue to make helpful videos about vending equipment. I wish you all the best of luck in your new business venture into the world of vending machines. Thank you again for taking the time to post such kind words.
I just purchased two vending machines and your video was extremely helpful with programming and priming
Alex! I used to email you all the time when you were with A&M, it’s great to know you are still doing your thing! Keep up the amazing work guys!
Hey Drew! Thanks for watching. Yes, broke out on my own but still handle the technical support for A&M and a few other companies.
Thank you your videos are very informative and I learned how to fix my vending machines. I recommend this guy here Alex to anybody who has problems with their machines they don’t know their machines so they you don’t have to go and pay anybody to repair them.
Awesome in explaining. Thank you for your video. Very helpful.
You're very welcome!
Love your videos. Great help. Thanks so much for your guidance!
You are so welcome!
Thank you so much for this information. It was so helpful for someone just starting out on their business‼️
I am happy to hear you found this useful. Thank you for the kind words!
You are a life saver! Bought the machine from a crappy vendor that didn't help me at all.
Thanks from France 🇫🇷
Thank you and I am happy you found this helpful. Comment if you have any questions.
Thank you very much
You are welcome
awesome videos learned a lot but on the bill changers some have a box on the side what are they and how to remove them
Answered so many questions Thank you!!
Happy I could help. Please leave a comment if you have any other questions.
@@VendingMachineSupport Your awesome! I'll let you know if I got any other questions. Thanks again!!
Well I do have a curiosity based question if it isn't too much to ask for. That being. Are you able to fit 20oz bottles in slots 2-9? Or should you simply have 12oz cans there and only use the first larger slot for 20oz drinks?
@@asdasd-pi8pk You can use 20oz bottles in columns 1 through 9. Though, in columns 2 through 9 you will need to remove the rod and spring from the cradle. Then replace the 12oz can shim with a bottle shim. Adjust the back spacer to keep the bottles loosely pressed up again the sold out flap at the front of the column. I recommend about a 1/4" gab (an index finger's depth) between the rear bottle cap and the back spacer. Lastly, set the brown timing cam to either 2, 3, or 5. Which one is dependent upon the bottle size. This video explains how to adjust the timing cam. ( ua-cam.com/video/7Gb6bUHi7cA/v-deo.html ). I plan on creating a detailed video series that covers these steps in detail. I hope this helps.
This helps immensely! I really do appreciate your help. I'm 18 and just started with the vending machines and you've helped me so much. Truely Thank you!
Quality video
My only difference is in loading the coin mech
I scroll around in the diag menu to CD (coin dump)
then feed the coins into the coin mech as if you are buying a drink, the coins the mech wants will go into the change tubes, the coins it rejects will pop out into the change bowl.
I find this way the machine and coin mech have " shook hands" and are working as one, it also tests the coin mech.
Nice!
Thank you!
We have a 501 series that was given to our church.. Any cleaning suggestions?
Hi, do you need shims for 16.9 bottles if you're set up with cans in this machine?
What part number can I use for coin mechanism. I have no part #. I have same model.
Hello Alex! this is all so helpful! Can this machine have a credit card reader? i can buy one for a good price.
Do you or can you tell me why one of my selections is dropping 2 can drinks at a time. It does not do it every time but sometimes.
I made a rookie mistake, and accidentally plugged the stack plug in backwards on a 501e. Killed power to the entire machine. Any fix?
Does anyone know if these are compatible with credit card readers?
It is the drink selection membrane I am referring to.
got any info on priming a DNCB 320/184-7? it's an older machine without the bill acceptor / external controller
The DNCB 320/184-7 model machine would be what I call a single price drink machine. The price is set on the coin changer itself versus a control board. These drink vending machines use a vend relay / solenoid to pass power to the vend motor. The easiest way to prime these types of machines, and really any drink machine for that matter. Is too simply vend each individual selection using hard currency until two or three drinks drop consecutively. This can be done with the door open so you can watch the motors cycle. An alternative priming method is to actuate the power cherry switch on each vend motor with a small insulated screwdriver. For reference this video ( ua-cam.com/video/7Gb6bUHi7cA/v-deo.html ) explains how to adjust a timing cam on a 501e. The power cherry switch looks much like the home switch in the video. The motor cover will need to be removed to expose the vend motors. Actuate the cherry switch and allow the motor to cycle to its next notch. Repeat until two to three drinks have vended. I will see if I have a functioning single price drink machine at my shop to make a quick video in the future. Until then Please take EXTREME CAUTION and at your OWN RISK. There is high voltage running through the power cherry switch that passes onto the vend motor. I hope this helps.
Question for you ..I have a Dixie narco 501 e and I have the first wide column set for cans with the 8 shims and the back spacer set properly . Timing cam is also set to 6 open notches . For some reason every 3rd or 4th vend I get a double vend any idea why ?
The busing that is located where the oscillator joins the drive arm of the vend motor may be worn out. This can cause the oscillator to have too much left and right play. This can cause the issue you are explaining.
If you priced all items at 1 dollar would you still need coins added for change?
Hello Alex, I need some insight for the following: We purchased a used 501e pop machine and placed it indoors in a recreation area. The fans seem to run all the time. We do hear the compressor kick on and off when cooling is required. Is there a configuration setting for indoor use versus outside operations? Our old DN (1984) version vending machine did not run the fans unless the compressor was called to cool the cold box.
The EVAP fans on most Dixie Narco machined run 247. They are not tied to the compressor like the condenser fan is. New machines will now have the EVAP fans tied to a relay to turn them off when ever the door is open for energy conservation reasons. -sic Energy Star. Your older Dixie Narco has had one leg of the 110V power leading to the EVAP fan(s) tapped into one of the thermostat wires. When the thermostat is unsatisfied power is sent to the compressor and in turn powers the EVAP fans. If the fan(s) are loud there could be a problem with the motor(s) themselves. As in dried out bushings.
You really need to do a video about the first column in the 501e/276e. Because no matter what I do I can not vend 3 cans in wide column on those machines at all. I can't figure it out and the internet can not agree on how it should work. I am stuck vending powerade bottles and they just aren't selling.
Alex do you have a video for assembling and or replacing the green ribbon 9 selection chord that goes behind the 9 selections on 501e. This all goes against a plate and has grey rubber pushers that back up to a metal plate. I took it apart foolishly and now I don't know how to reinstall it every combination is not working. Any help greatly appreciated.
@Christopher Sanchez Great suggestion! May be a bit before I can post one. So to get you back up into operation let me see if I can explain how to reassemble this assembly. Sequence is: Plastic Button -> Gray Rubber Strip -> Selection Membrane -> Metal Backing Plate -> 11/32 Nut. The confusing part I have found for many people is the gray rubber strip. This strip acts as the actuator to the selection membrane. If you look closely one side of the rubber strip has nine small hard plastic tips. This is the side that faced the selection membrane. The larger rounded side faces the actual clear plastic button. On the back bottom center of each clear plastic button there is a small raised area. The larger rounded side of the gray rubber strip should make contact at this point of the button. Hopefully this helps.
Hi there, I have the Dixie Narco 276cc. It’s setup for 12oz cans right now. What would I need to do to set it up for 20oz Gatorade bottles or 16oz water bottles?
The Dixie Narco 276CC was manufactured by Dixie Narco for Coke-a-Cola. This denoted by the CC in the model name. There will be a few other identifying numbers in the model name that denotes the type of control board it is using. For example. DNCB-276E-SII would indicated that would be a broken down like this. Dixie Narco (DN) Cold Beverage (CB) 276 (Can Drink Capacity - This number is not always exact) E (Series) SII (Control Board). What is the complete model number of your machine? The will help narrow down what setting are needed. A side note. Take a hard look at the 16.9oz water bottle you are wanting to vend. Does the bottle make a crinkling sound when squeezed? If so, there is going to be a good chance that bottle will end up getting jammed or double vended. The newer water bottles are produced with thinner walls. This leads to vending issues when stacking 24 or 48 bottles on top of each other.
Don't forget to change your cam settings for your bottles
Have you seen any videos on how to change the cams?
I saw that video; is it possible to obtain vending machine manual without purchasing respective vending machine? Aedin
Ok i checked the motors after i got switch fixed so i could see HD on the front to cheack them. i have a couple that does not move, does that mean motor is bad or switch on the motor itself. thank you again for your help. i'm new at this. DN501E
Try swapping the non working motor with a working motor. Does the problem follow the motor? Here is a link to a video about removing vend motors. ( ua-cam.com/video/JeCZzP4qGpA/v-deo.html )
I need to talk with someone about the programming of my 501e. It is full and ready to go, but selection 2 says it’s sold out when indeed it is full. I was reading that the programming should be checked before ruling it as a bad sold out switch ?
When you press the blue service mode button on the control board. Do you receive a JC-2 on the front display? Or when you closed the door on the machine did the display read HOMING? If so then there is a jam in that column. Remove all the products from that column 2 and the potential stuck drink. Then press the blue service mode button to receive the JC-2 error on the display. Then press and hold selection button one until the display reads HOMING. This will attempt to turn motor number 2 back to a home position. The current state of the sold out switches can be tested by the control board. This can be found by going to SP and SC under the DIAG menu. SP will show any sold out switches that are empty or OPEN. SC will show any sold out switches that are full or CLOSED.
I have a Fsi 3151 CB 700 would you have any idea how to set it to Forced vending the people at the location are using it for a change machine thanks Dave
@Dayday Saint An FSI machine is also known as an USI or U-Select It. From my experience on USI control boards. The Force Vend or 'FRC' as it will be shown on the display. Can be found under the 'OPTN' section which typically accessed with button 3. Press the SERVICE MODE button. Then press button 3 to get to 'OPTN'. Press button 1 and the display should show 'FRC N' Pressing button 1 again will cycle between 'FRC Y' and 'FRC N'. Pressing the # button will save your setting and exit. (Mode Button -> 3 -> 1 -> 1 -> #)
Hi
I followed your instructions....wasn't quite a seamless as you did it 😬🤪.
I got my machine refurbished and already set up for bottles as this primarily what is produced in my country.
Had some difficulty toggling btwn the settings.
I switched the coin mech and bill validator (following your video😁👍).
2 Quick questions:
I filled the coin mech and the bill validator accepted cash but then it suddenly stopped accepting cash, what could be the cause?
Is it possible to vend irregularly shaped bottles?
Well done on the change and validator swap. If your bill acceptor suddenly stopped taking dollar bills. You may have not added enough coins to the coin tubes. 12 coins in each tube is the minimum. If you have plenty of coins in the coin tubes. Try making 5 to 6 vends using just coins. This will allow the control board to record the total value of coins entering into the tubes. This may bring your bill acceptor back online. In regards to bottle shapes. The Dixie Narco E series machines only work well with cylindrical shaped bottles or cans.
@@VendingMachineSupport
Thanks for responding
It's still not taking bills. Also not taking coins from the front.
Help I want to place on location 😩
Is there an off switch as i dont think plugging and unplugging is the best method of powering down.
Just downloaded the manual to have a read.
I live in a cold winter state. My compressor broke. Will the winter keep my drinks cold until I can get a compressor?
@Show Runner This is a tricky question to answer. I will assume your machine will be located outside. The quick answer is that you will just need to monitor the internal temperature. The worry is not will it be cold enough but will it get to cold internally. The ideal temperature range for drinks is between 36F and 40F. Diet soda will start to freeze at 34F. Now, the evaporator fan that circulates the air inside the machine which runs all the time will put off heat. This sometimes is just enough to keep the drink from freezing. I have, in the past for my customers, wired in incandescent light bulbs that would sit in the bottom of the drink machine near the evaporator coil. The light bulb radiated enough heat to keep the drinks from freezing and, with a working compressor, keeps the drink at a consumable temperature.
Where can you find the serial number and barcode ?
Is there a way to check the motor switch to see if it’s bad before changing the whole motor? DN501E
You can swap places with another switch from a working motor. You can also use a volt meter to check for continuity through the switch.
how would i go about priming a single price dixie narco? i own a dncb 180cc its single price with no circuit board
You need to press the motor home switch on the vend motor. This will actuate the vend motor and make it rotate. Or you can simply run money through the machine and keep vending a selection until something drops from the column.
I’m having problems loading the wide column with cans. It’s giving out 2 every other vend. How many flat shims should I use
You will need to have a total of eight black plastic can shims in the wide column. Four on the left and four on the right.
@@VendingMachineSupportI have 4 on each side and it’s dispensing 2 on one vend and 1 on the other.
Hey Alex, my Dixie 501e is not taking coins. The coins go right through the machine into the return slot without being registered. Is there something I can do about this?
There could be a several issues causing this. Check to make sure there are no jammed coins in the coin changer. Jammed coins can lead to the coin changer instantly rejecting any incoming coins. If you can't find any jammed coins even after removing discriminator (the top portion of the coin changer) from the chassis if the coin changer the problem could be the coin changer it self.
I'm very new to the vending machine and i wanted to know if they still make parts for the Dixie Narco 501e??
The majority of parts for the Dixie Narco E series of drink vending machines are still available.
Hey Alex, I want to know if we need nickels and dimes in the 501e. Our machine was built in 4th quarter of 1999. We only use quarters for our pop. We set the price to $ .75 ..
You will need a minimum of 12 coins in each tube if you want to accept $1.00 bills if equipped with a bill acceptor. If all your drinks are set to .75 then you need to think of all the combinations of coins that can be equal or greater the .75. For example. If a customer was to insert two quarters and three dimes equaling .80. Then the machine will need to be able to pay the customer back a nickel in change. So rule of thumb is always load each tube with coins. 12 coins in each tube is the minimum. This video may help to understand more: ua-cam.com/video/4Zoej4twAz0/v-deo.html
Hey quick question, so my Dixie narco machine is plugged in. I hear the compressor running, bill accepter is on but the digital screen is off and I can’t program it. How do I turn it on ??
@Daniel Enriquez I am assuming that you have an E-series model drink machine. If that is the case and the bill acceptor is on. Then you know you are getting power to the control board. It could be that the red LED display for the machine is not working or the harness to the red LED display is not securely connected at either end. There is not a separate on and off switch to the control board on an E series drink machine.
@@VendingMachineSupport thanks for the response. I will go ahead and check it out
I have a hard question: Will 16.9 bottles work in the wide column #1
Yes they will. You will need x6 plastic can shims and x4 plastic bottle shims for this to work correctly.
My machine don't work with the door open. And I didn't find the sensor. Do you have any idea where is?
@Willer Xavier Reis By sensor I am assuming you are speaking about the door inner lock switch. This can be found on the inside of the main door between your dollar bill acceptor and coin acceptor. It is a white pull out switch.
Have you ever changed out the clear buttons on an older vendo Pepsi machine?
There are several different ways the selection buttons are mounted on Vendo drink vending machines. It is all based upon the which model you have. Some require a small flat head screw driver and needle nose pliers. While other styles need the plastic and metal retainer springs to be removed along with the selection switch assembly. Something to remember. The major drink manufactures like Coke and Pepsi do not manufacture the actual drink vending machine itself. The vending machines are manufactured by companies like Dixie Narco, Royal Vendors, and Vendo. Which model do you have?
@@VendingMachineSupport Vendo 470
How do you load the wide column with 16.9 oz bottles
x6 black plastic can shims ( x3 on the left & x3 on the right ) x4 plastic bottle shims ( x2 on the left & x2 on the right) Timing cam set to hole #3. Start rear spacer at hole #23 and adjust accordingly.
I need to swap out 16oz monster cans to 20oz Gatorade bottles need help with that
@Patrick Key If in selections 2 through 9 then set the brown timing cam to hole #5. The rear spacer to hole number #15. Lastly remove the rod and spring in the cradle. If in selection 1. Set the grey and red timing cam to hole #3. The rear spacer to hole #15. Lastly have two black plastic spacers on the left and two on the right.
Thank you! How many cans per column. I know the machine holds 501 cans total, but what does that equate to per column? TIA
The 501e 12oz can capacity is actually 480. Column 1 will hold 96. Columns 2 through 9 will hold 48 each.
@@VendingMachineSupport thank you so much.
I hope you can answer one more question: I installed a CC reader yesterday and I was having trouble communicating with the VMC. Are there any particular settings the machine needs to have on?
@@jonathanguerrero1078 There aren't any settings on the S2D (501e) control board that needs to be set for the credit card reader. Though the S2D control board should be using firmware 381.xx or greater for the best results. Navigate to: HD -> DIAG -> VERS. Then push selection button 1 to show current firmware version. The firmware can be updated via an EPROM replacement which is not very difficult to do. It is on my list of topics to cover in future videos.
@@VendingMachineSupport thank you so much
Can you show us why a Dixie narco 267e would say sold out on the display and how to solve it?
I would be happy too. Though your question is a very broad one. A bit more detail about the issue you would help. Do you have drinks in the machine? Does it read SOLD OUT on all the selections when the door is closed? Can you vend the drinks using the MT-1 found under DIAG?
@@VendingMachineSupport turns out I just didn't refilled the machine but it is okay now thank you
Can you vend cans AND bottles using the same machine? I was waiting to see column 3 primed to see if the two different products worked
You can run both cans and bottles in the Dixie Narco E series of machines. Both cans and bottles are primed the same way. Though each column must be loaded with either a can or a bottle not a mix of the two. For example. If column three has been set for bottles then it must be loaded with bottles. Each column can be reconfigured for a bottle or a can product.
@@VendingMachineSupport Sadly...we spent 4 hours today thinking we were going to just load the machine close the door and vend. Came home defeated :( After loading we realized the 'sold out' flap was not disengaged so after unloading (tuition of life, grrr) we spent way too much time trying to figure out what to do to fix that problem. We adjusted the back metal 'bar' (depth spacer?) to put 3 cans in and 2 bottles, problem seemed solved. Then we followed your video to prime the columns, first column dispensed ok, the rest were dropping 2 or 3 cans (we lost several :( now we're centless). Again way too much time to find out about shims and then once we set the price and tried to vend only button 2 would work. Shut the door, unplugged it and threw in the towel for the day :(
So what are shims, how do I find them and once I get the machine set up for cans, how do I get it to vend? TY
@neddy707 Sorry to learn of your issues and I understand how frustrated you may be towards this process. A complete video guide on how to install shims, rods, and to setup a Dixie Narco 501e for different drinks sizes in general is in the works. Until then, from your description it appears there are a few issues at hand. First. Make sure the timing cams on the motors are set for the product size you are vending. Here is a quick video I made explaining how to adjust these: ( ua-cam.com/video/7Gb6bUHi7cA/v-deo.html ).
In the way of shims. If the machine was previously set up for bottles then you will need 12oz can shims. Typically there is a diagram on the inside of the inner door that explains the shims required and what adjustments need to made. For selections 2 thru 9: x8 12oz can shims and x8 rods and springs will be needed. For selection 1: x8 plastic can shims will be needed. Here are a few links to complete 12oz can conversion kits for the 501E: (www.veii.com/SHIM-KIT-12-OZ-CAN-FOR-DIXIE) or (www.dsvendinginc.com/p-2041-d60907260004-dn-501e600e-conversion-kit-12-oz-can.aspx). Please note that I have no affiliation with either of the these two companies.
How to install these shims is a topic to large place into this reply. I have an old video I made about 10 years ago where I strapped a GoPro on my head while I installed 12 oz can shims into a Dixie Narco 501E. I will upload this video this week and use it as a place holder until I am finished with the new version. I know this is a topic that is in need.
Hang in there and don't give up on the machine. The good thing is once you setup one selection for the narrow columns. Just copy and paster those settings to the remaining columns. I hope this helps and best of luck.
@neddy707 Old 12oz can shim install video fro Dixie Narco 501E drink vending machine uploaded. I hope this helps some: ua-cam.com/video/EAkvc_PYF7M/v-deo.html
Can you load 16oz energy drinks into this machine?
Yes it will vend 16oz cans. For the narrow columns ( 2 through 9 ). You will need a rod & spring inserted in to the cradle. Set the rear spacer to hole 8 and the timing cam to 3. ( ua-cam.com/video/iSS4eGRIa8c/v-deo.html )
Do you know what I need to buy to be able to vend red bulls out of these machines?
The kit that Dixie Narco made to enable the Dixie Narco 501e or 276e to vend the small Red Bulls cans is no longer being produced. The kit, from my experience, was not very reliable at vending these cans.
Are you able to put 8-9Oz drinks in the Dixie Narco 501e?
Yes but it requires a kit that is no longer available to my knowledge. If memory serves me correctly. The kit consisted of a few rod & springs with colored plastic lifters that slid over the rods. As well as a side shim and back spacer adaptor. It is more trouble than it is worth in my opinion. Stick with 12oz, 16oz Cans, 16.9oz, 20oz, and 24oz bottles to reduce the chances of jams and double vends.
@@VendingMachineSupport Alright Thank you!! That's about what I read online but thought I'd ask you for validation. Seriously thanks again!
Hey Alex how do I prevent a double vend. I keep having two drinks drop at once.
I need to know some more detail about what type of product you are attempting to vend. ie. Can or Bottle? Ounces? What column is it in?
@@VendingMachineSupport It happens with 12oz cans. I'll do a motor test and as it goes through rotation it will vend 1, then another and then it'll skip a rotation and on the next vend two cans come out. Also it's set on function one. And sometimes it'll do it with bottles 16.9 oz
I’m having the same issue
@@basiceconomicswithjosephju756 I found I had to only go 2 cans deep and adjusted the cam to number 2 or 3 .. holds less cans but I didn’t have to spend money to get rolling
Having issues priming mine. When I go through the motor tests, it says testing, but no motors will turn.
When you pressed the mode button on the board did the front display show something in the effect of 'JC - X' where X is a number?
It did not. However, I just found a bad glass fuse up on the board. It is the middle fuse. I’m wondering if this isn’t why my motors are not working?
@@vicnestico3137 Correct. That is the motor fuse or known as the F2 Fuse. It is 6amps. Something could possible be jammed in your machine that caused this fuse to blow. For reference. The F3 (1amp) fuse is for your peripherals like coin changer and dollar bill validator. F1 (1.6amp) fuse is for the main control board. Get a couple of the 6amp motor fuse as this will blow more frequently. Check to make sure you do not have a pinched or jammed product at the bottom of your columns. Please make sure to remove power before attempting to remove or replace the fuse.
Just got some fuses, and going to try it. I’ve also been doing some research and see that I’m going to have to get different shims and rods to convert this over to cans as well once I get it working?
@@vicnestico3137 That is correct. You will need x8 rods & springs along with x8 can shims for selections 2 through 9. The rods and springs will need to go into hole B in the cradle. The brown timing cam on motors 2 though 9 will need to be set to 1. ( Video on how to set the timing cam: ua-cam.com/video/7Gb6bUHi7cA/v-deo.html )The rear spacer will need to be set to hole 13. For selection number 1 you will need a total of 8 plastic can shims. Four on each side. The red and gray timing cam will need to be set to 1. The rear spacer will also need too set to hole 13.
Why does my 501e drop 1 can then 2 cans then nothing tans repeat
Which selection is this happening on? Selection 1 or 2 thru 9?
It’s happening on 7 but it’s a new machine to me and is the only column I’ve been playing with
Possibly because of the missing spring rod ?
@@evanarmstrong3465 The issue you described is indicative of a missing rod and spring placed in hole B. Make sure you also have the metal can shim installed and have set the brown timing cam to hole number 1. (ua-cam.com/video/7Gb6bUHi7cA/v-deo.html)
@@VendingMachineSupport Thanks ! any sites you recommend to shop for parts like rods, shims, switches ,etc ?
Alex: what type of vending machine vend eyelashes? Aedin