SKYHUNTER FPV Build Part 9 Maiden
Вставка
- Опубліковано 15 вер 2024
- SKYHUNTER FPV Build Part 9 Maiden
SKYHUNTER Setup Specs With Links Below
Part 1 - Main Fuselage - • SKYHUNTER FPV Build Pa...
Part 2 - Fuselage Motor Mount - • SKYHUNTER FPV Build Vi...
Part 3 - Wings - • SKYHUNTER FPV Build P...
Part 4 - Elevator and Stabilizers - • SKYHUNTER FPV Build Pa...
Part 5 - Servo Placement and Linkage connections - • SKYHUNTER FPV Build Pa...
Part 6 - Motor Installation and Wiring - • SKYHUNTER FPV Build Pa...
Part 7 - Final Fuselage Assembly - • SKYHUNTER FPV Build Pa...
Part 8 - Wiring, Final Assembly, CG - • Skyhunter FPV Build Pa...
Part 9 - Maiden - • SKYHUNTER FPV Build Pa...
Motor NTM 35-48 900Kv www.hobbyking.c...
Servos HobbyKing TGY-210DMH www.hobbyking.c...
Prop APC 12x6E www.hobbyking.c...
Batteries Turnigy 45-90C 5000mah www.hobbyking.c...
ESC Turnigy Plush 60A www.hobbyking.c...
Strobe Lights ReadymadeRC www.readymaderc...
Led Wing lights Red www.hobbyking.c...
Led Wing lights Green www.hobbyking.c...
Skyhunter FPV Setup
Video TX Bevrc 800 1.3ghz Ib Crazy Cloverleaf mid wing
Video RX 1.3ghz - Ib Crazy Mad Mushroom
IB Crazy 1.3ghz antenna set - www.sierrarc.co...
Dragonlink UHF
go big or go home man, you got to maiden flight fully loaded its the extra thrill. Thanks for all your videos I learned a lot.
A thorough build video series. Thank you for recording and narrating the build. I've just got my first SH and was influenced by a buddy that had had some amazing flights. When I saw that Daemon was contributing to the thread, I was sold. So many amazing hours flying my old X-8 with Daemon mods. Thanks guys for being so generous with sharing your knowledge.
just watched all the vids in the series... mammoth youtube session lol. I just acquired a second hand Skyhunter. I had to rip out a lot of unwanted cabling from the wings and damaged a servo wire. I have a bit of work to do to it but it's pretty much there. I too will be maidening without FPV gear at first
You sir, are amazing. Thank you for your videos!
I got my model today and I had no Idea how to really build it!
I personally thank you a thousand times~!
A pleasure to watch your Build of the Skyhunter, Lots of good tips too, Glad your maiden went well, Enjoy.
Thank you very much for doing the videos! I've never built a foam plane before, only balsa. I learned a lot!!!!
Thanks again!
Thanks for the skyhunter build 1 to 9, really enjoyed watching. Cheers..
One of the best build videos I have seen Very nicely done sir !!
Hope to maiden my SH this weekend
Thanks for making the build videos - they helped me alot
awesome build series
Nicley done David. That was a very good build series and the Skyhunter looks great. Just about to order a SkyHunter myself myself as an uprade to my Bixler 2 so getting very excited... :o)
Thanks for posting.
Ian
smart man, I am now wiring everything up for major missions. I will be using Dragonlink, with APM 2.5 for missions, and 1.3 ghz video, I can't wait!
Sweet, I can't believe someone let it go these are nice planes!
Good to see more U.S peeps using the metric system, its a pinch once ya get the hang of it, its easy to remember
Great videos, I've been looking for a new FPV rig. I think I need to build a Sky Hunter!
are you going to fit auto pilot with return home, auto landing, GPS, camera,
great video and if you are going to put it all in will you film it
all the best
Allan
Good build! Made me looking to transition to fixed wing UAVs.
Can the foam body be painted?
Was just wondering if the prop you used was a pusher? I'm new to pusher planes. Can you just reverse the motor and use a reg.Thanks for the videos ! Great job. I will be building mine this winter. Have a Merry Christmas
wish I could have been there.
9.5mm from the leading edge? Or 9.5cm lol. Great video :) How wide is the internal bay? From the looks of things it will easily fit my gear but i might possibly add a downward camera for mapping..Thanks and subbed
Rocky Mountains? That John Denver's full of shit! Lol, nice vid!
thanks to these vids, my skyhunter maiden went really well. see my video response :)
Sweeeeeet!
Awsome!
What is the total flying weight (fpv gear included) and the longest flight time you con get please?
Thanks :)
Nice Setup Video .... but just a correction. CG is not 9.5 mm from leading edge -> it has to be 95 mm :)
Thanks for sharing your knowledge. I am trying to build up the same setup. Did you end up doing any additional mods. Also do you have any fpv videos from your skyhunter? What's the longest you've had it in the air with gear before the battery ran low? Thanks!
I want to buy a plane and fly over the sea bay. Distance there and back 15 kilometers. Enough to me two batteries on 5000?
hi, what max AMPs do you got with this motor+esc combination?
Thank you for watching!
brokeback mountain?
About 20-25 min on half throttle
yes 9.5mm from the leading edge, sorry for the confusion
yeah..I know...but during a maiden you never can tell if your going to have a good day...I don't know about you, I have another $500 in FPV equipment that I am putting in it....Soooo no way!