Connect a Mahor V4 to a Duet 6HC - testing for max. RPM, extrusion rate, and pressure
Вставка
- Опубліковано 21 жов 2024
- Buy the V4 at WorkhorseRobotics.co.
This video shows how to connect a Mahor V4 Pellet Extruder to a Duet 6HC main board, and test for max. RPM, extrusion rate, and pressure using LX175 PLA at 220C with a 2mm nozzle. The 6HC is running at 24VDC with 1.68A on the extruder axis. Use this for pellet extrusion 3D printing.
iwiss crimpers: www.amazon.com...
stepper 4 socket connector: www.digikey.co...
www.digikey.co...
Sockets for stepper: www.digikey.co...
TEMP_1 for 100k thermistor feedback connector: www.digikey.co...
Pins for thermistor connector: www.digikey.co...
mahor.xyz/wiki...
DUET doc on wiring:
docs.duet3d.co...
Connector for OUT1 up to 6A at 24VDC - for extruder heating element - www.digikey.co...
REPRAP configurator tool
configtool.rep...
你好兄弟!如果你的摄像机🎥更清楚那会更完美🎉谢谢兄弟!
Can you help me connect it to on ender 3 printer
Follow the steps. First connect the stepper and get it to spin. Then connect the heater and thermistor. Create a mount plate if needed.
@@samwechsler@samwechsler Hi, did you change the firmware somehow> or did it work with the original one?