Change the aluminum waterbox to one off a 2016 v1 tr1 engine. Its 2 inches shorter and you can use 4 inch inboard exhaust hose. You do need to trim the piece that holds the ecm. Sounds awesome
the straight aluminum tube works well i did it with a two and a half inches wide by 6 inches long and it worked perfectly on a 07 yamaha vx 1100 sport grip better power
Did you fit it on a VX110 engine? Was the 90 degree and 45degree both 2.5 inches wide? I have a VX cruiser 2015 that would like to do. Could you send the measurements if is the same ? Thanks
Could you possibly take pictures of the finished result. Im looking to do this to my 08 vx110 sport and I trying to decide if I’m gonna go with a straight metal pipe or a 45
I know I’m extremely late to this, got a vx cruiser that I’m looking to do the exhaust on, but my question is with the uni filter how does it go if you flip the ski or water gets under the seat?
The links for exhaust are incorrect for a 2014 VX Deluxe. The 45 pipe needs to be 2 1/2" at one end and 3" at the other. The duct work that goes to the impeller is 3" and the water box that the 90 connects to is a 2 1/2". To make it even more frustrating, the company that the 90 came from sent the wrong item! Grrrrrrr!
Great video can you help me please what would I need to do this to my waverunner vx deluxe 2017 please length and sizes if you could help would be appreciated thanks
John John Edwards I have not done VX that new If you want you can personal email me with your email address and send me a picture and I will help you the best I can. I need a picture of your water Box in your outlet inside the ski Hull
Two questions for you: 1. I see it’s been 3 years since you posted this. Is there anything you would have done differently, is it still holding up fine? 2. For the 45 pipe, the eBay link didn’t work. I’m trying to find one for a 2006 Yamaha vx1100 deluxe, but I need to know what the diameter is for the aluminum pipe?
Everything held up good still using it to this day you have to do your own measuring pick up a measuring to at Harbor freight that measures in millimeters
man, thank you for posting this video! what year was this VS? mine is a 2010 with a melted waterbox and cooked 180 degree tube out of the aluminum Water separator. hoping your link parts will fit mine.
Sounds like your ski is not cooling right you should have water running through that water box. But anyway i have had no issues run my ski with this set up in fact i ran that ski wide open for 40 min. on sat. in the gulf with no over heating issues to my piping setup.
Thanks for the reply. Sounds right. I'm gonna just pull the motor, flow out all of the cooling lines and make sure it is flowing right. Just bought it Thursday with no disclosures or symptoms from seller. I bought it to use the guts for a conversion so it needs to be cleaned up, out, reinstalled and vetted b4 conversion anyway. Thanks!
Thanks your video has helped a lot. There isn't a lot information about this model out here about modding. One question what did you do with your air filter airflow sensor? Thanks!
Bobby Ritter I did not do anything with the air flow sensor. for the intake all I did is install a cold air intake and i removed the big air box there's a link below in the description it's very cheap for the cold air intake
Nice video. Enjoyed it very much . I have a 2017 yamaha vx cruiser ho. I like to make some mods to it . especially the heavy sound it give when riding. Can you give some direction if that can be done on mines. Its sounds like a muffler heavy noise. Thanks.
Brayan Santos no I sure don't i never had the chance to do that ski yet. I would take it apart measure it converted into millimeters and order the parts.
Brayan Santos just wanted to add one more thing just make sure you take your time on the measurements and also when you're converting it from inches to millimeters. I wish I could help you more but I don't even know what the setup looks like in your ski.
FLORIDA LIFE CLIPS Okay cool do I need the exact parts shown here in this video? Also do the parts need to be bent to the same angle? (45 and 90 degrees)
FLORIDA LIFE CLIPS Okay is there a way for you to check the specs and get back to me or do you need me to do something for you to give me the part numbers? I’d really appreciate it because I have been wanting to add the free flow for a while now!
Miles.Mindset I need detailed pictures of your engine Bay you can personally email me through UA-cam and give me your email address and I will get back to you
+Bobby Ritter it's probably from the Heat try to slice it up the side with the razor and then peel it off the water box or maybe try to get some silicone WD-40 spray underneath that rubber and then work it off of there
Hi, Im not an expert but it looks like you’re putting a lot of stress on your hoses. I think a better setup is with a 135 degrees silicon elbow and a 90 degrees aluminum pipe.
Hey what's up bud. Thankx for posting this, I'm looking to doing this to my machine. Do you happen to have video of ski running after mods? Would like to see how it sounds/operate thankx in advance 👍
No clue never done a 2014 but if the set up looks the same like on a video it should work without a problem otherwise you'll have to take your plastic baffles and muffler out and just do some simple measurements go on eBay or Amazon and order car Turbo piping
No biggy Florida Life Clips. You didn't know and were just trying to help us out. I'll research some parts like you did and hopefully come up with something that works for my 2014.
I guess your measurements are the same as mine. I have a VX Cruiser 2015 (VX110). Were you able to figure it out? If you did, could you post the measurements I help a brother out 😁💪🏼
Yes I have it installed ,Boy it even sounds great low tone power .
Good deal!
Change the aluminum waterbox to one off a 2016 v1 tr1 engine. Its 2 inches shorter and you can use 4 inch inboard exhaust hose. You do need to trim the piece that holds the ecm. Sounds awesome
Really want to do this on my ski however the link to the 45 Pipe cannot be found. Could you provide an updated link? Thanks!!
the straight aluminum tube works well i did it with a two and a half inches wide by 6 inches long and it worked perfectly on a 07 yamaha vx 1100 sport grip better power
Did you fit it on a VX110 engine? Was the 90 degree and 45degree both 2.5 inches wide? I have a VX cruiser 2015 that would like to do. Could you send the measurements if is the same ? Thanks
Could you possibly take pictures of the finished result. Im looking to do this to my 08 vx110 sport and I trying to decide if I’m gonna go with a straight metal pipe or a 45
I know I’m extremely late to this, got a vx cruiser that I’m looking to do the exhaust on, but my question is with the uni filter how does it go if you flip the ski or water gets under the seat?
Love it!! Mid range you can really tell the difference.
The links for exhaust are incorrect for a 2014 VX Deluxe. The 45 pipe needs to be 2 1/2" at one end and 3" at the other. The duct work that goes to the impeller is 3" and the water box that the 90 connects to is a 2 1/2". To make it even more frustrating, the company that the 90 came from sent the wrong item! Grrrrrrr!
Thanks for the info never did it on the 2014 But it's gonna be well worth it when it's done
Great video can you help me please what would I need to do this to my waverunner vx deluxe 2017 please length and sizes if you could help would be appreciated thanks
John John Edwards I have not done VX that new If you want you can personal email me with your email address and send me a picture and I will help you the best I can. I need a picture of your water Box in your outlet inside the ski Hull
Hey guys I have also 2017 VX DELUX I'm curious. Did you got it done on the VX?
Hey how did you like the sound vs stock? Is it louder?
Two questions for you:
1. I see it’s been 3 years since you posted this. Is there anything you would have done differently, is it still holding up fine?
2. For the 45 pipe, the eBay link didn’t work. I’m trying to find one for a 2006 Yamaha vx1100 deluxe, but I need to know what the diameter is for the aluminum pipe?
Everything held up good still using it to this day you have to do your own measuring pick up a measuring to at Harbor freight that measures in millimeters
Is there lots of strain on the lower pipe bending it like that..may loose seal on end of exhaust????
I can't answer that all I can tell you I have not had one problem with this mod.
how many mm is the aluminum pipe the 45 degrees
Thanks, brought a air filter but what do you do with the oil feed pipe that is attached to the stock air filter? Thanks
kennethwestlake1 Put a little universal air filter I have a video posted
FLORIDA LIFE CLIPS cool will do. Thanks bud.
THanks for the posts ,helped out alot thanks.
thank you very much it's good performance
No problem I'm glad you're happy
man, thank you for posting this video! what year was this VS? mine is a 2010 with a melted waterbox and cooked 180 degree tube out of the aluminum Water separator. hoping your link parts will fit mine.
Sounds like your ski is not cooling right you should have water running through that water box. But anyway i have had no issues run my ski with this set up in fact i ran that ski wide open for 40 min. on sat. in the gulf with no over heating issues to my piping setup.
Thanks for the reply. Sounds right. I'm gonna just pull the motor, flow out all of the cooling lines and make sure it is flowing right. Just bought it Thursday with no disclosures or symptoms from seller. I bought it to use the guts for a conversion so it needs to be cleaned up, out, reinstalled and vetted b4 conversion anyway. Thanks!
The pipe isnt on ebay anymore any way you can find a working link? Would be much appreciated.
Did you put in turbo inter cooler pipe 45?
mówisz po polsku?
Hey buddy is there any other upgrades I can do to a 2015 Yamaha v1 sport. Looking to get as much out as possible.
I would go with a new impeller with more aggressive pitch
I also have a 2019 vx deluxe any other suggestions for a vx to make it a little faster
Impeller impeller If you want top end
Thanks your video has helped a lot. There isn't a lot information about this model out here about modding. One question what did you do with your air filter airflow sensor? Thanks!
Bobby Ritter I did not do anything with the air flow sensor. for the intake all I did is install a cold air intake and i removed the big air box there's a link below in the description it's very cheap for the cold air intake
Isn't there a small tube sensor after the throttle body that connects to the air intake
Bobby Ritter oh okay I know what you're talking about all I did was got a small Universal filter to put on it and I tucked it away
Great thanks I didn't know if caused any problems just tucking it away, bc I bought the same air filter as u
Bobby Ritter I have not had any problems I have been running my ski for months like this.
Any issues with high rpm? Did this to mine and it idles high
No
Nice video. Enjoyed it very much .
I have a 2017 yamaha vx cruiser ho. I like to make some mods to it . especially the heavy sound it give when riding. Can you give some direction if that can be done on mines. Its sounds like a muffler heavy noise. Thanks.
This mod would do that heavy noise at low rpm
Thanks. Much appreciated
Where can I get this parts?
I see the silicone but the other dosent show up. Also what would be the length .
Hey man I’m having a problem water is not coming out from the side when on the water or when I’m flushing it do you know what could it be ??
Your pee hose is clogged up take it apart and clean it. Meaning start from the side of the Hull trace it to the engine block and clean it out.
FLORIDA LIFE CLIPS thanks man I appreciate it
Yea just had the same problem.had a small rock stuck from the sandbar
do you know what are the sizes for a 2012 yamaha fzs waverunner supercharged
Brayan Santos no I sure don't i never had the chance to do that ski yet. I would take it apart measure it converted into millimeters and order the parts.
Brayan Santos just wanted to add one more thing just make sure you take your time on the measurements and also when you're converting it from inches to millimeters.
I wish I could help you more but I don't even know what the setup looks like in your ski.
Pipe is OK. But airfilter kill horsepower!! No torque.. Only 70 km/h after install.
Before 94km/h
So do not install a short intake filter
how do you know this
@@teej8461 ???? Because I've checkt it with my own waverunner vx sport!!! 🤷♂️🤦♂️
By any chance you know how to replace fuel filter ? Thanks in advance
Depending what year you have of ski they're usually inside the gas tank on the sending unit
FLORIDA LIFE CLIPS I got a 2007 waverunner vx deluxe 1100
Hey man post videos inside the jetski 🔥🔥so i can know exactly what u did 🔥🔥🔥🔥🔥🔥
Hey man i have a quick ? Can i block off my stock oild cat can return line i got s new cat can but only 2 lines
I just got a 2019 yamaha vx cruiser ho
Do you recommend the same setup?
I never install this on a 2019 model do I recommend it yes 100% is it gonna fit I do not know.
Thanks
Hey im trying to find the pipe can you send me the link
what was the measurements for your vx cruiser
Great video! Thanks for sharing my man!
Just did mine, sounds great. I did notice about 2 mph on top end. I can now do 48 mph, which is great for a 330 hour VX. Thanks again!
Hello any options for an air intake for a 2018 Seadoo wake 155 ? Thanks
Yes
FLORIDA LIFE CLIPS you have a video on it ? Or can I send you my email ? Thank you
@@mattmedina1639 no I don't have access to all the skis different years different models wish I did I would post videos
your link for the 45 doesn't work, do you have another???
No I'm sorry I don't it was so long ago that I did this video it's easy though do your measurements and millimeters and order it from ebay
Curtis Loftin have you found a 45? I am also looking
Do you know the size of the 45 so I can find one to order since the link is so old
Sorry i don't
3”
AFishing Addict do you know the length as well?
So im trying to do this mod but after i took the stock exhaust box off i realized that the rubber that comes from the exhaust is bigger and wider
You just have to play with different parts
@@FLORIDALIFECLIPS maybe a reducer from 3in to 2.5
Is there any way to do this on a 2006 Kawasaki STX-12F?
Miles.Mindset yes
FLORIDA LIFE CLIPS Okay cool do I need the exact parts shown here in this video? Also do the parts need to be bent to the same angle? (45 and 90 degrees)
Miles.Mindset This will not fit your jet ski I would have to see are set up to give you the proper part numbers
FLORIDA LIFE CLIPS Okay is there a way for you to check the specs and get back to me or do you need me to do something for you to give me the part numbers? I’d really appreciate it because I have been wanting to add the free flow for a while now!
Miles.Mindset I need detailed pictures of your engine Bay you can personally email me through UA-cam and give me your email address and I will get back to you
Will this work on a 2013 yamaha ar192?
Not sure never done a 2013
Having problem getting old pipes off water box any advice?
+Bobby Ritter it's probably from the Heat try to slice it up the side with the razor and then peel it off the water box or maybe try to get some silicone WD-40 spray underneath that rubber and then work it off of there
I was finally able to get it off
Bobby Ritter good deal.
That 45 degree looks a little much. Do you think a straight piece would work better? Thanks
hanratty450 I don't know never tried it with a straight pipe I have done 3 skis this way and it worked fine.
but try it see what happens.
I got the same jet ski and it done not work the pipes is to Small
Hi,
Im not an expert but it looks like you’re putting a lot of stress on your hoses. I think a better setup is with a 135 degrees silicon elbow and a 90 degrees aluminum pipe.
Is its 2.5
Hey what's up bud. Thankx for posting this, I'm looking to doing this to my machine. Do you happen to have video of ski running after mods? Would like to see how it sounds/operate thankx in advance 👍
Now unfortunately I don't but I can tell you you will be very happy with it sounds amazing!
@@FLORIDALIFECLIPS awesome brother. Will be ordering those parts soon thankx again 👍
Can you help me i cant find the aluminium pipe ?
Go on ebay it is a 45ﾟ aluminum intercooler Turbo pipe
How badly does this effect fuel consumption?
No clue but it does sound good so I can tell you
WD40
Slippery to install.
24 hours later becames sticky helping to seal..
Will this work on a 2014?
No clue never done a 2014 but if the set up looks the same like on a video it should work without a problem otherwise you'll have to take your plastic baffles and muffler out and just do some simple measurements go on eBay or Amazon and order car Turbo piping
FLORIDA LIFE CLIPS ok thanks I appreciate that
I have v1 2016 it will be same setup , can I have your twitter
ahmead abo mousa Are you asking me will this fit your 2016 vx?
FLORIDA LIFE CLIPS no I mean model v1 ,2016
ahmead abo mousa I do not know never done v1 but The V-1 looks like a upgraded version of the VX.
Apparently it's pretty year specific cause this pipe is way too small for my 2012 vx110
I apologize for any inconvenience but if you do get the proper pipe you'll be very happy with the mod
@@FLORIDALIFECLIPS it's 2.5 comming out of my water box. But the tube that exits the ski is 3.5.
I had the same problem with my 2014.
No biggy Florida Life Clips. You didn't know and were just trying to help us out. I'll research some parts like you did and hopefully come up with something that works for my 2014.
I guess your measurements are the same as mine. I have a VX Cruiser 2015 (VX110). Were you able to figure it out? If you did, could you post the measurements I help a brother out 😁💪🏼
Is your 45 a 1 foot or 2 foot?
Kavaris Howard 1ft
Kavaris Howard But can get the 2ft one and cut it down
Ok thanks
Links don't work for me
Those size pipe fit on 2014 vx crusier
No clue measure to be sure
Yo
Sizes would be great please bud
I have links up in the description.
The aluminum pipe link doesn’t work can u post another
What size is the pipe? And how longv
any issue with getting filter wet?
no