This is an absolute game changer!! FEELS AMAZING!! and the auditory feedback of the pencil brushing up against the paper is unreal! Got a few bubbles in it, but im happy. Id probably suggest putting an air purifier in the room for an hour or so before anyone goes in it and work in there.
The first try was a tragedy. But the second one went great In my experience the stickers shouldn't be that much to the edge, otherwise the tension between two edge stickers distort the foil, and then it's extremely hard to apply it
On the first try I couldn't. But in the second try I did it perfectly following your instructions correctly and with no bubbles. Thanks! Really like your product on studying in my ipad.
It works and I wish I had fitted it years ago (bought the 12.9” Pro in 2018) BUT it takes some time to get rid over the bubbles (well over an hour in my case) - my only advice is not to completely remove the protective back completely until all the bubbles are gone. Once peeled it flips back easily. You need it up to see the bubbles properly and down to apply the considerable force that sometimes takes. I took the back of a spoon handle to some of them.
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
Using a similar styled protector for my galaxy tab s7 and id wasted SO much money on protectors that came with the whole installation kit shown here but absolutely NO instructions on how to effectively use it 😭 finally found this video and from the bottom of my heart THANK YOU because I FINALLY managed to get the paperlike protector on successfully without having one corner or sometimes an entire side of the protector not sticking down and then peeling up and falling off a few days later. Youre an angel 😢❤ i screwed up my first attempt following this tutorial because i stuck the guide stickers on wrong (rip, yes i am dumb lol 💀😂) but got it right on the second try with the backup from the pack. Will be bookmarking this in the future to use again when i need to replace the protector again ❤❤ Also pro tip for other artists (especially galaxy users with s pens!) that these feel AMAZING to draw on but the rougher paper ish texture eats the default soft plastic nibs like you wouldn't believe; do yourself a favour and invest in some metal nibs which don't wear down as fast 😅😊
Managed to get mine perfectly for the first time by myself. HOWEVER, a couple of tips and some feedback because I read through the comments and watched the guide four times before attempting any of it by myself. 1. Dear @Paperlike, your wet wipes are practically useless. Please make wet wipes that are more functional. 2. Also as a word of advice, add an extra batch of helper stickers and dust removers for each screen protector. Those are cheap, but go a long way to make an application seamless. 3. Use a credit card to push large bubbles towards small bubbles. That’s the only way to get the small ones out. 4. BEFORE getting the last layer off, carefully remove the big guidance sticker and get any bubbles created out. Anything that could move dust/air in the room. 5. Make sure you’ve got a good light and use the dust remover in a pattern that would resemble a lawn mowers path. Go over and over the iPad. It might take some time, squint your eyes for any dust leftovers. 6. If you’re not working in a lab (like your fellow human right here), make sure to turn off any and all AC systems and fans in the room. 7. Don’t be in a rush. Be aware that the application process might take well over an hour. Good luck everyone!
as everyone here has stated, this need to be upgraded. i did the same process on my last ipad pro 11 and it always had some annoying bubbles. i thought there had been some upgrade since then, but this time its just worse.
I had high hopes for this. Followed the video perfectly. There are more than 20 small bubbles on my screen and after a hour of trying to scrape them out, it’s hopeless. I just put a bunch of screen protectors on my kids phones and it was stupid simple with no bubbles, but this took forever and just doesn’t work.
6:12 any problem can be solved with a credit card 😂However this screen protector is fantastic. I just applied the second film after a year and a half. it was also a great experience to unbox and apply by following step by step this video ❤❤❤
Maybe I'm just stupid and didn't appeal to common sense, but as part of preparation, TURN OFF THE IPAD! It's practically impossible to see dust specks if the screen activates. I failed to do this, and it wasn't until I'd removed the underside protective layer of the Paperlike, noticed a new speck of dust on the screen, used the dust collector too aggressively which turned the screen on. The time it took me to turn off the iPad and do a final inspection of the screen for dust, was enough for a few specks to collect on the exposed underside of the Paperlike, which is pretty much game over for a dust-free application 😞
I bought my first paperlike like 5 years ago and I'm just about to use the second one. First one was much loved but had to many little scratches from my apple pencil.
Love that you're enjoying your Paperlike experience! As for the scratches, as you mentioned, those often turn out as traces of writing that the pencil left behind naturally. You can try cleaning it with a damp cloth and a drop of dishwashing liquid. I️f that doesn't help and you still see those marks on your second Paperlike, please chat with our Support team at help.paperlike.com, and they can offer more guidance!
It was first time ever that I installed any protector and I'd say it came out THE BEST EVER with Zero bubbles....Here are the tips to follow: 1) Follow the above guide but understand the reason behind each instruction e.g why is it necessary to avoid every dust particle? It's because even small dust particles create bubbles in the area that are only removed once you remove the dust particle. So NO DUST PARTICLES. 2) Single best advice is to remove small bubbles by slowly moving large bubbles into these small one and then removing that large one (No matter even if you have to move a bubble from one part of screen to other). Because small bubbles can't can't can't be removed alone. FOR PAPER LIKE team: Your kit address the alignment issue but try covering the bubbling issue as well in this video because not everyone is a pro bubble remover.
This is by far the hardest to put on screen protector. The little cloth comes with the package leaves heaps little “hair” around the screen. There were many bubbles, it took me a long time to squeeze out most of the bubbles, some just impossible to squeeze out. Two corners of my bank card are peeled because of it. 😢
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
Just bought a new iPad Air 10.9 and immediately the paper like (used it at my pro for 5 years now) and a bit disappointed because of the camera cutout at the top. My iPad Air 2024 has the camera on the long side 😞. Now looking at your website I see that there is a pre-order. When do you expect it?
My second application looked bad as the first. I’m gonna try a different product. For some reason this one doesn’t seem to work for me. Seems so simple. I’ve applied screen protectors before 🤔
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
am I supposed to be able to see the edge of the paperlike. I don't feel like it applied anything to the screen and I checked the part I peeled I don't feel like anything is stuck on it. How cam I tell if the paperlike is applied.
Hi, Paperlike's Screen Protector is very thin but you can see the edges of the Screen Protector on your iPad. We’d love to help with any issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
I have OCD and have tried several different times to get these on. I have bought and wasted three packs (six total) because the dust and the bubbles never stop and don't go away. I love that these are matte because finger prints make me crazy (which is why I kept trying) but it just does not work. I am sorry but these are not user friendly to put on an iPad like at all. :( I really, really wanted to like them.
Hi, sorry to hear you’re unhappy with our product! We’d love to help with the installation issues you’re having, considering you've gone through three packs. Please chat with our Support team at help.paperlike.com and they can help you more!
You just suck at it, I’ve put one protector on a year for the last four years and it’s always been fine. And I have two dogs with little hairs flying everywhere. It’s the easiest screen protector to but on aside from the way they do iPhone protectors at the Apple Store
@@jpeanes Ah, you’re very kind, I see. Paperlike ended up making it right and sent me another set with additional instructions. I was able to get a screen protector on successfully. They were so nice and I’m very happy I tried again because I love the screen protector, now. Have a nice day.
@@SopranoMoose if I may ask what were the extra steps they provided in the instructions, I’ve waisted one screen protector I’m not so good at putting them on, was there anything specific that helped you put it on successfully?
Sadly I wasted both my Paperlike's from my pack following this guide. It is damn near impossible to get the bubbles out with this process, I followed the instructions to the letter and was as meticulous as I could be. The end result was just far too many super tiny bubbles left behind that will not budge no matter what I try. The Paperlike also makes the iPad screen super dull compared to its natural state. I am not blaming you of course, you are just doing a helpful guide, but overall my experience with Paperlike is quite poor and a total waste of money in all honesty. :-(
Hi! Sorry to hear you’re unhappy with our product. We’d love to help with the bubble and screen quality issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
The first attempt didn’t go as planned, but on my second try, I achieved about 95% accuracy. This time, I used the iPhone’s torch to carefully search for dust particles. It’s essential to turn off your iPad; this makes the dust particles more visible as they stand out against the dark screen when illuminated by the torch light. Good luck to any future installers!
@@dads_random_projects Noted! If you need any help with your next installation, please chat with our Support team at help.paperlike.com and they can help you more :)
Same here. I was so excited to finally use a paperlike screen protector, followed the guide and the first one went straight to the garbage and the second is still on the iPad (because I removed the one I had on that was still in perfect condition but was smooth and shiny) it's full of scratches, bubbles, everything. I still can't stand looking at my IPad screen when the screen is off. Pisses me off and makes me really sad because I waited years to finally buy and use one.
I wasted one of the screen protectors. After I got rid of the bubbles I saw the screen protector was damaged. I don’t know how it happened because I removed them over the protective foil and I wasn’t pressing hard on the screen. I had to use the second protector instead. Needless to say I’m disappointed.
Does your Paperlike have a shiny or smooth finish? Paperlike's Screen Protector has a matte feel, if that's not what you're experiencing, please reach out to our Support team at help.paperlike.com and they can help you more!
i had this exact same issue. the screen protector was ripped with the Blue 1 tab. i was so confused when i did mine because i ripped it off and no screen protector because it was still on the blue 1 sided paper. instead of the 2. i have a few air bubbles at the top small ones that will drive me nuts but if doesn’t look horrible. i wont be looking at the camera area too often, but it feels smooth and looks nice.
Those air bubbles should go away soon, or you can rub the bubble with your finger wrapped in a cloth until they disappear. I️f you need any help, please chat with our Support team at help.paperlike.com!
I’ve literally never used a screen protector before but I watched this video multiple times as I was doing it and omg the process was pretty painless! There are a couple small bubbles I missed but considering my screen already had a couple small scratches before, I wasnt expecting a flawless finish anyway. Thank you for your thorough guide and all the stickers and accessories to help! 💜
Glad you're enjoying your Paperlike! The bubbles should go away on their own or you can wrap the cloth around your index finger and rub the bubble until it disappears.
For how much paperlike charge us, wish they give us a better way of installation. Their installation technique seems archaic. Seems like every other manufacturer has figure out a better way to install the screen protector. That being said, i’m looking forward for a glass version of paperlike that doesn’t wear off but still have the same feel and clarity of the 2.1
The guide was useful, but I always found there was always bubbles and guides would slip so you constantly trying to realign it to the iPad. Aligning it straight on one side it was still crooked on the other sides which made me feel it isn’t cut perfectly straight. I didn’t find paperlike made any difference. I found the screen was still too slippery and not paper like at all. I was disappointed I took it off straight after applying as I couldn’t tell any difference. I do want to say they are true on their refund policy, they refunded me in full, the unused product they suggested give to someone else. So in that sense, they worth trying because if you find not for you, they will refund you in full without the hassle of posting anything back. I updated my comment to mention this great customer service. Cheers.
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com. Thanks!
@@Paperlike probably a refund would help, it doesn’t feel any different in my opinion. If I had a suggestion send a 2cm sample for people to try it, if suitable for them.
Just tried to apply two of these in the last half hour, and had to bin both: so £35 wasted. This is a great product - if you live in an optics factory. If you live in an old barn with a small white terrier in it, it’s totally impossible to find a sufficiently dust free environment to do the installation…
Sorry to hear about your installation experience! We’d love to help with any issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
These instructions are excellent. The application of screen protectors has come a long way and I guess Paperlike is leading. Overall a very good experience. Kudos! My hope for the next level of improvement is that when first aligning the screen protector it would not be so slippery. Perhaps a differently textured protective layer would be less slippery on the glass of the iPad. Also, applying the three orange stickers to fixate the protector to the iPad was quite tricky. They tend to stick to the desk before sticking to the sides of the iPad and then you need to apply force, which can pull the screen protector out of alignment (because it is so slippery on the glass). As a bonus, I would very much appreciate an additional section with instructions on what to do when you discover a spec of dust under the screen protector during the step of removing bubbles, right after initially applying the protector. That is what happened to me, and that is when I got nervous and hectic. My guess is that this is when many people discover a spec of dust and it would be very helpful to be calmly guided through removing those imperfections. Thank you and I much appreciate that this video is done by the founder himself! PS: great to see the Walter Isaacson biography of Steve in the background 😉
Thank you so much for your detailed feedback! We'll definitely take this into consideration and if you have anything you'd like us to know, please reach out to our Support team at help.paperlike.com. Thanks!
On the first try I couldn't. But in the second try I did it perfectly following your instructions correctly and with no bubbles. Thanks! Really like your product on studying in my ipad.
Great video with really clear instructions. Great product too.
This is an absolute game changer!! FEELS AMAZING!! and the auditory feedback of the pencil brushing up against the paper is unreal! Got a few bubbles in it, but im happy. Id probably suggest putting an air purifier in the room for an hour or so before anyone goes in it and work in there.
So glad you're enjoying your Paperlike experience 🤩
@@Paperlike so far, so good!
The first try was a tragedy. But the second one went great
In my experience the stickers shouldn't be that much to the edge, otherwise the tension between two edge stickers distort the foil, and then it's extremely hard to apply it
Thank you. Really clear video. Paperlike protector is now on iPad pretty much perfect.
I had no issues with my first installation thankfully! Very happy with the product and i feel like it is now a must-have after drawing on it.
Fantastic, good instructions and friendly teacher!
On the first try I couldn't. But in the second try I did it perfectly following your instructions correctly and with no bubbles. Thanks! Really like your product on studying in my ipad.
Glad you're enjoying your Paperlike experience!
It works and I wish I had fitted it years ago (bought the 12.9” Pro in 2018) BUT it takes some time to get rid over the bubbles (well over an hour in my case) - my only advice is not to completely remove the protective back completely until all the bubbles are gone. Once peeled it flips back easily. You need it up to see the bubbles properly and down to apply the considerable force that sometimes takes. I took the back of a spoon handle to some of them.
Appreciate your tips!
Worked perfectly. Also, love your office set up (or studio).
Great guide!
Installed it perfectly❤
Wish I’d read these comments before buying. So many bubbles and I followed it perfectly
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
Using a similar styled protector for my galaxy tab s7 and id wasted SO much money on protectors that came with the whole installation kit shown here but absolutely NO instructions on how to effectively use it 😭 finally found this video and from the bottom of my heart THANK YOU because I FINALLY managed to get the paperlike protector on successfully without having one corner or sometimes an entire side of the protector not sticking down and then peeling up and falling off a few days later. Youre an angel 😢❤ i screwed up my first attempt following this tutorial because i stuck the guide stickers on wrong (rip, yes i am dumb lol 💀😂) but got it right on the second try with the backup from the pack. Will be bookmarking this in the future to use again when i need to replace the protector again ❤❤ Also pro tip for other artists (especially galaxy users with s pens!) that these feel AMAZING to draw on but the rougher paper ish texture eats the default soft plastic nibs like you wouldn't believe; do yourself a favour and invest in some metal nibs which don't wear down as fast 😅😊
I just got the paperlike, the glove and the pencil grips and this is amazing. Why didn’t I do this sooner?? ❤
Love this for you!
Following this worked for me on an iPad Mini. I would add 1 step - clean the screen before you even start the Paperlike installation.
Taking this back to Best Buy. iPad was brand new, clean and dustless.
worked perfectly on the first try
🤩🤩
Bro's now used up his luck for the next 2 years. Both were completely wasted
@@sidcritch7724 haha
Managed to get mine perfectly for the first time by myself. HOWEVER, a couple of tips and some feedback because I read through the comments and watched the guide four times before attempting any of it by myself.
1. Dear @Paperlike, your wet wipes are practically useless. Please make wet wipes that are more functional.
2. Also as a word of advice, add an extra batch of helper stickers and dust removers for each screen protector. Those are cheap, but go a long way to make an application seamless.
3. Use a credit card to push large bubbles towards small bubbles. That’s the only way to get the small ones out.
4. BEFORE getting the last layer off, carefully remove the big guidance sticker and get any bubbles created out. Anything that could move dust/air in the room.
5. Make sure you’ve got a good light and use the dust remover in a pattern that would resemble a lawn mowers path. Go over and over the iPad. It might take some time, squint your eyes for any dust leftovers.
6. If you’re not working in a lab (like your fellow human right here), make sure to turn off any and all AC systems and fans in the room.
7. Don’t be in a rush. Be aware that the application process might take well over an hour.
Good luck everyone!
Thank you, we appreciate your feedback!
as everyone here has stated, this need to be upgraded. i did the same process on my last ipad pro 11 and it always had some annoying bubbles. i thought there had been some upgrade since then, but this time its just worse.
I had high hopes for this. Followed the video perfectly. There are more than 20 small bubbles on my screen and after a hour of trying to scrape them out, it’s hopeless. I just put a bunch of screen protectors on my kids phones and it was stupid simple with no bubbles, but this took forever and just doesn’t work.
Now make one for the new ipad too...
6:12 any problem can be solved with a credit card 😂However this screen protector is fantastic. I just applied the second film after a year and a half. it was also a great experience to unbox and apply by following step by step this video ❤❤❤
Love to hear it!
Finally did it right 😂😂 after 2 iPads
This seems way too complicated.
Maybe I'm just stupid and didn't appeal to common sense, but as part of preparation, TURN OFF THE IPAD! It's practically impossible to see dust specks if the screen activates.
I failed to do this, and it wasn't until I'd removed the underside protective layer of the Paperlike, noticed a new speck of dust on the screen, used the dust collector too aggressively which turned the screen on. The time it took me to turn off the iPad and do a final inspection of the screen for dust, was enough for a few specks to collect on the exposed underside of the Paperlike, which is pretty much game over for a dust-free application 😞
I bought my first paperlike like 5 years ago and I'm just about to use the second one. First one was much loved but had to many little scratches from my apple pencil.
Love that you're enjoying your Paperlike experience! As for the scratches, as you mentioned, those often turn out as traces of writing that the pencil left behind naturally. You can try cleaning it with a damp cloth and a drop of dishwashing liquid. I️f that doesn't help and you still see those marks on your second Paperlike, please chat with our Support team at help.paperlike.com, and they can offer more guidance!
Don’t waste your $$$ if you want a flawless installation - it doesn’t exist both screen protectors ruined!!!!
It was first time ever that I installed any protector and I'd say it came out THE BEST EVER with Zero bubbles....Here are the tips to follow:
1) Follow the above guide but understand the reason behind each instruction e.g why is it necessary to avoid every dust particle? It's because even small dust particles create bubbles in the area that are only removed once you remove the dust particle. So NO DUST PARTICLES.
2) Single best advice is to remove small bubbles by slowly moving large bubbles into these small one and then removing that large one (No matter even if you have to move a bubble from one part of screen to other). Because small bubbles can't can't can't be removed alone.
FOR PAPER LIKE team:
Your kit address the alignment issue but try covering the bubbling issue as well in this video because not everyone is a pro bubble remover.
Thank you for your tips, we'll definitely take note! :)
This is by far the hardest to put on screen protector. The little cloth comes with the package leaves heaps little “hair” around the screen. There were many bubbles, it took me a long time to squeeze out most of the bubbles, some just impossible to squeeze out. Two corners of my bank card are peeled because of it. 😢
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
Just bought a new iPad Air 10.9 and immediately the paper like (used it at my pro for 5 years now) and a bit disappointed because of the camera cutout at the top. My iPad Air 2024 has the camera on the long side 😞. Now looking at your website I see that there is a pre-order. When do you expect it?
Hi! The shipping timeline for the new iPad sizes is currently 1-2 weeks :)
My second application looked bad as the first. I’m gonna try a different product. For some reason this one doesn’t seem to work for me. Seems so simple. I’ve applied screen protectors before 🤔
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com.
am I supposed to be able to see the edge of the paperlike. I don't feel like it applied anything to the screen and I checked the part I peeled I don't feel like anything is stuck on it. How cam I tell if the paperlike is applied.
Hi, Paperlike's Screen Protector is very thin but you can see the edges of the Screen Protector on your iPad. We’d love to help with any issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
I have OCD and have tried several different times to get these on. I have bought and wasted three packs (six total) because the dust and the bubbles never stop and don't go away. I love that these are matte because finger prints make me crazy (which is why I kept trying) but it just does not work. I am sorry but these are not user friendly to put on an iPad like at all. :( I really, really wanted to like them.
Hi, sorry to hear you’re unhappy with our product! We’d love to help with the installation issues you’re having, considering you've gone through three packs. Please chat with our Support team at help.paperlike.com and they can help you more!
You just suck at it, I’ve put one protector on a year for the last four years and it’s always been fine. And I have two dogs with little hairs flying everywhere. It’s the easiest screen protector to but on aside from the way they do iPhone protectors at the Apple Store
@@jpeanes Ah, you’re very kind, I see. Paperlike ended up making it right and sent me another set with additional instructions. I was able to get a screen protector on successfully. They were so nice and I’m very happy I tried again because I love the screen protector, now. Have a nice day.
@@SopranoMoose if I may ask what were the extra steps they provided in the instructions, I’ve waisted one screen protector I’m not so good at putting them on, was there anything specific that helped you put it on successfully?
Sadly I wasted both my Paperlike's from my pack following this guide. It is damn near impossible to get the bubbles out with this process, I followed the instructions to the letter and was as meticulous as I could be. The end result was just far too many super tiny bubbles left behind that will not budge no matter what I try. The Paperlike also makes the iPad screen super dull compared to its natural state. I am not blaming you of course, you are just doing a helpful guide, but overall my experience with Paperlike is quite poor and a total waste of money in all honesty. :-(
Hi! Sorry to hear you’re unhappy with our product. We’d love to help with the bubble and screen quality issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
The first attempt didn’t go as planned, but on my second try, I achieved about 95% accuracy. This time, I used the iPhone’s torch to carefully search for dust particles. It’s essential to turn off your iPad; this makes the dust particles more visible as they stand out against the dark screen when illuminated by the torch light.
Good luck to any future installers!
@@dads_random_projects Noted! If you need any help with your next installation, please chat with our Support team at help.paperlike.com and they can help you more :)
I totally agree.
Same here. I was so excited to finally use a paperlike screen protector, followed the guide and the first one went straight to the garbage and the second is still on the iPad (because I removed the one I had on that was still in perfect condition but was smooth and shiny) it's full of scratches, bubbles, everything. I still can't stand looking at my IPad screen when the screen is off. Pisses me off and makes me really sad because I waited years to finally buy and use one.
I wasted one of the screen protectors. After I got rid of the bubbles I saw the screen protector was damaged. I don’t know how it happened because I removed them over the protective foil and I wasn’t pressing hard on the screen. I had to use the second protector instead. Needless to say I’m disappointed.
I’m not sure mine actually had anything in it - I can’t see any difference- are you supposed to be able to see it?
Does your Paperlike have a shiny or smooth finish? Paperlike's Screen Protector has a matte feel, if that's not what you're experiencing, please reach out to our Support team at help.paperlike.com and they can help you more!
@@Paperlike - The film stayed on the backing so nothing a fixed to the screen. Had to put it in the bin unfortunately.
Oh no! Please chat with our Support team through the above URL and they can help rectify the situation.
i had this exact same issue. the screen protector was ripped with the Blue 1 tab. i was so confused when i did mine because i ripped it off and no screen protector because it was still on the blue 1 sided paper. instead of the 2. i have a few air bubbles at the top small ones that will drive me nuts but if doesn’t look horrible. i wont be looking at the camera area too often, but it feels smooth and looks nice.
Those air bubbles should go away soon, or you can rub the bubble with your finger wrapped in a cloth until they disappear. I️f you need any help, please chat with our Support team at help.paperlike.com!
@paperlike I am not able to do the last layer removal. I ruined it. Please help
Oh no! Please chat with our Support team at help.paperlike.com and they can help you more!
I’ve literally never used a screen protector before but I watched this video multiple times as I was doing it and omg the process was pretty painless! There are a couple small bubbles I missed but considering my screen already had a couple small scratches before, I wasnt expecting a flawless finish anyway. Thank you for your thorough guide and all the stickers and accessories to help! 💜
Glad you're enjoying your Paperlike! The bubbles should go away on their own or you can wrap the cloth around your index finger and rub the bubble until it disappears.
I followed step by step and I dont even think its on 💀
Oh no! Please chat with our Support team at help.paperlike.com and they can guide you more.
For how much paperlike charge us, wish they give us a better way of installation. Their installation technique seems archaic. Seems like every other manufacturer has figure out a better way to install the screen protector. That being said, i’m looking forward for a glass version of paperlike that doesn’t wear off but still have the same feel and clarity of the 2.1
The guide was useful, but I always found there was always bubbles and guides would slip so you constantly trying to realign it to the iPad. Aligning it straight on one side it was still crooked on the other sides which made me feel it isn’t cut perfectly straight. I didn’t find paperlike made any difference. I found the screen was still too slippery and not paper like at all. I was disappointed I took it off straight after applying as I couldn’t tell any difference. I do want to say they are true on their refund policy, they refunded me in full, the unused product they suggested give to someone else. So in that sense, they worth trying because if you find not for you, they will refund you in full without the hassle of posting anything back. I updated my comment to mention this great customer service. Cheers.
Sorry to hear you weren’t fully satisfied with your Paperlike experience! If there’s any way we could help turn that around, please chat with our Support team at help.paperlike.com. Thanks!
@@Paperlike probably a refund would help, it doesn’t feel any different in my opinion. If I had a suggestion send a 2cm sample for people to try it, if suitable for them.
Gotcha, thanks for your comment and we're sorry Paperlike wasn't for you!
@@Paperlike I requested a refund via help, cheers
Thank you!! It looks great and no air bubbles!! 🎉
🤩🤩🤩
Just tried to apply two of these in the last half hour, and had to bin both: so £35 wasted. This is a great product - if you live in an optics factory. If you live in an old barn with a small white terrier in it, it’s totally impossible to find a sufficiently dust free environment to do the installation…
Sorry to hear about your installation experience! We’d love to help with any issues you’re having. Please chat with our Support team at help.paperlike.com and they can help you more!
These instructions are excellent. The application of screen protectors has come a long way and I guess Paperlike is leading. Overall a very good experience. Kudos!
My hope for the next level of improvement is that when first aligning the screen protector it would not be so slippery. Perhaps a differently textured protective layer would be less slippery on the glass of the iPad. Also, applying the three orange stickers to fixate the protector to the iPad was quite tricky. They tend to stick to the desk before sticking to the sides of the iPad and then you need to apply force, which can pull the screen protector out of alignment (because it is so slippery on the glass).
As a bonus, I would very much appreciate an additional section with instructions on what to do when you discover a spec of dust under the screen protector during the step of removing bubbles, right after initially applying the protector. That is what happened to me, and that is when I got nervous and hectic. My guess is that this is when many people discover a spec of dust and it would be very helpful to be calmly guided through removing those imperfections.
Thank you and I much appreciate that this video is done by the founder himself!
PS: great to see the Walter Isaacson biography of Steve in the background 😉
Thank you so much for your detailed feedback! We'll definitely take this into consideration and if you have anything you'd like us to know, please reach out to our Support team at help.paperlike.com. Thanks!
On the first try I couldn't. But in the second try I did it perfectly following your instructions correctly and with no bubbles. Thanks! Really like your product on studying in my ipad.
Glad you're enjoying your Paperlike experience :)