Efficient Winter Heating: Hcalory Diesel Air Heater In A Travel Home Bus
Вставка
- Опубліковано 27 лют 2024
- Hi yall, In this video Larry and I are installing an Hcalory diesel air heater in his 1987 MCI tour bus, Previously owned and custom built for American country Singer “Tammy Wynette”. Since Larry has aquired the bus for traveling and camping on the road with his family, hes been doing a great job at maintaining its originality and upkeep. His plans are simple, get the benefits of a diesel air heater as a back up economical way to heat his home on the road. There will definitely be some more updates and upgrades to this system, but for the most part we get it installed and working quite well for this tour bus/road home setup. Thanks for watching and enjoy the video. 🍻
HCALORY - HC-A1B 5KW Toolbox Diesel Air Heater
Buy Here On Amazon: www.amazon.com/dp/B0C378L7MJ/...
HCALORY - SS2 8KW Diesel Air Heater
Buy Here On Amazon: amzn.to/49hnCI3
Recommended items:
Fire Extinguisher: amzn.to/3O9Wu56
LiFePo4 Battery: amzn.to/3tZLWP0
3” Duct coupling: 75mm a.co/d/70l7vlk
Male Cigarette adapter: amzn.to/3FDLGre
3” Duct: amzn.to/45x9SpF
Carbon monoxide detector: amzn.to/3FiWta1
Optional:
Diesel fuel cell: amzn.to/3tCFnBG
1280wh battery: amzn.to/3Q0aSwG
-Tool box integrated design, easy to carry and store.
-Snapon lid design, easy to disassemble, more convenient for maintenance.
- Bluetooth app control, more convenient to use.
- High Efficiency 0.1-0.35L/h rapid heating.
Support ATEM OFFROAD here: Atemoffroad.com
10% OFF USE PROMO CODE: ATEM10
Buy Openroad 270 Awning here:
openroad4wd.com/collections/a...
Buy Openroad Winches here:
openroad4wd.com/collections/h...
VTOMAN 1500 LFB Battery Bank Generator: amzn.to/48mc1Xe
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission. Thank you - Навчання та стиль
Since incorporating the Toolbox version HCALORY in our overlanding setup our RRT aka “Two story house" has been “Something to Bragg about”
We used to use a buddy heater, but after many sleepless nights, I was left “Crying in the rain” searching for another 1 lb propane bottle.
Now instead of our getaway ending In “Divorce” 😢
I can wholeheartedly say ladies you can “Stand by your man”
Paula…😂
🤣🤣 I love this comment it’s the best. Ladies Listen up! 🙌 glad to hear you found the heater too, I can’t wait to get back out and use my toolbox diesel heater. Thanks for watching I appreciate it 🍻
@@ATEMOFFROADwe look forward to your vlogs and learning. Know your time posting is appreciated. ❤
Paula…
Pretty cool set up like the for header wrap
Yeah that ducting will definitely need the header wrap no doubt about it. Lots of wasted heat will collect in the lower bay. Thanks for watching 🍻
We bought that same heater after your review. We tried it out last weekend and it worked well.
Oh nice, Hopefully you got it on a good deal seen them on Amazon for 109 crazy. I think it’s because winter is coming to an end. Good to hear it’s working out for you guys thanks for watching. 🍻
@@ATEMOFFROAD it was $102! I liked the first one that you reviewed a little better, but not twice as much!
@@campoutwestus yeah the first one is my favorite out of the two. , I did see the price has come down a fair bit on that one too. Both pretty good options either way.
Did you use special solder on that copper exhaust pipe? Considering solder melts around 370° F and the exhaust reaches north of 400° F.
I’m not totally sure of the spec on that solder. Larry said there’s no way it’s coming off. We did talk about adding a safety screw, just in case. But I guess we can always start up the heater and put some solder up to it and find out 🤷♂️. Thanks for watching🍻
That’s a good question that I believe I can answer. We use 95/5 tin-antimony solder for the most part in the plumbing industry. We also use 40/60 tin/lead for base board heating applications which has a lower melt point.
The melting point for 95/5 tin-antimony is 464 degrees “F” 240 “C”
Paula…
@@ATEMOFFROADI would bet that solder is Lead-free 95/5 which has that higher melt point.
Paula…
Sodder. 😅
Soul-derr 😅😅 did you hear I said aluminum properly 🙌🍻
I watched it again and didn’t hear you say that at all, only when Larry said about the ducting tape. Maybe you edited that part out? 😢😂
@@JeepinDownUnder haha yeah maybe he just said it then 😅
I looked into the etymology of aluminium and it seems it was originally alumium, by the inventor, who then amended it to aluminum. The British then started using aluminium to make it sound more like other elements (helium, potassium etc.).
I guess what I’m saying is you win this round, Dustin. 😂
@@JeepinDownUnder I’m dead 😂💀