ORACLE Pre-Runner Style LED Grill Kit for Wrangler JL- Installation Guide
Вставка
- Опубліковано 20 жов 2024
- This kit allows you to add 3x LED Marker Lights to the front Grill of your Jeep Wrangler JL without any cutting or drilling. These super-bright 3-Watt LEDs make your Wrangler stand out and can be connected to your parking lights, Daytime Running Lights, or to an Auxiliary Switch. The kit includes all the hardware, wiring, and connectors needed for this installation.
More info here: www.oraclelights.com/products/prerunner
That's a clean install nice job that would look great on my jeep thx guys
Justin your the shit man you helped me with my order a few days ago for my crystal granite metallic vector grill a few days ago and got it shipped the same day cant wait for that it's supposed to be here on the 11th🤙🤙
Im trying to install, only question did you puah the hornsm back or put any pressure on them? Thanks.
Are the new style pre-runner lights just as bright as the old round style pre-runners?
Brightness is comparable but the new models are diffused so the light is softened by the diffuser.
So you can’t ever take your grill off unless you cut the red wire?
This is the old kit the new kit comes with quick release connectors and a Y- assembly. Check the link in the description for more info.
question can't you run the red wire up to the fuse box and use an acc. fuse.
yes, if you prefer for the lights to com on with ACC rather than parking lights you can go to the fuse box.
Justin I have your LED headlights for my 04 Dodge Ram. Are they pretty much plug and play or do I have to wire in any resistors to them so the vehicle’s warning system does not go haywire and trip a code?
You can buy the position podz amber led lights from Walmart, which I'm almost positive that's what these are. Buy some wire connectors and add a fuse. Locate your cigarette fuse in your circuit box and connect the add a fuse there.
Need a version of these lights for JK
Can these be installed with the fog lights? That way the only come on when you hit the fog lamp switch on a JL.
Yes, just connect the power wire to the + foglight wire.
What if you removed your fender liner and blinkers for fender chop where can you connect the wires at?
If you already removed the factory wiring the connector is still at the top of the week arch. This is the plug that would be disconnected for a fender chop. Connect to the wires on this plug for power. You can also just connect to an ignition fuse on the fuse box for power.
You know which fuse number to use ?
Accessory fuse is # F52 in the distribution box. It is a 20amp yellow fuse, micro.
Thanks again
Can you just hook to the auxiliary buttons ?
Yes 👍
Are this compatible with a 2021 Wrangler Rubicon 4xe???
Yes, the 4xe uses in the JT grill with the larger openings so you would use ORACLE PART#5871
Justin how can add all 6 to each grill? Can i connect to driver side for second set of 3? Thank you
Yes you can connect 6 together if you want.
Would this be on while driving?
Depends on how you connect it, if you follow the instructions they will be connected to the Parkin lights so yes, can be on when driving.
I want this soo Bad but i have an aftermarket grille liner so it can’t add it to my gladiator 😭
Will these come on automatically with drl? I just got them but I want to make sure they don’t just come on in park mode.
You can connect to ignition power (F52) on fuse box and these will act like a DRL and come on when the Jeep is on.
@@ORACLElights so these aren’t on all the time while driving?
@@MidwinterEclipse yes, if you connect to F52 like recommended above they will always be on whenever the vehicle is on.
Which bulb do you tap into to be able to have the pre runner lights on while driving?
You can connect to ignition power (F52) on fuse box and these will act like a DRL and come on when the Jeep is on.
@@ORACLElights can you make a video showing this procedure?
@@danielpruett2724 here you go ua-cam.com/video/RLtsvzvs90M/v-deo.html
What if I don’t have daytime running lights?
Same steps as the video, we are connecting to the parking lights in the video not the DRL.
@@ORACLElights thanks!
Been dealing with a center light out on a kit I ordered from quadratec in July. Center led went out in late October and quadratec says they are on back order from supplier until mid December. Mid December rolled around and still nothing. Emailed oracle directly and gave them order info as they requested about a week ago and haven’t heard back since. Not a happy customer at this point...
Hey Chris! Thank you for your feedback. We will be looking into the delay of the response and address this accordingly. I see the pre-runner kit is estimated to ship within 3-5 business days. I also see you ordered through Quadratec for the warranty, and they are sending you a new kit. In the future please contact Oracle direct for Warranty as we can send out partial kits that prevent you from waiting. If you have any other questions please let me know and I will be happy to assist you further.
@@ORACLElights thanks! Wish I knew about the partial kit as all I need is one light. Would be easier for all involved. Thanks again
Still waiting. This is getting a little rediculous. Want a replacement part or a refund.
@@chrisdwyer1699 Hi Chris, we're sorry it seems that Quadratec didn't update you on your order status. The latest batch did not meet our rigour QC standards so we are re-manufacturing to avoid any other issues for customers. The current estimate is late January. Please feel free to contact us at 1-800-407-5776 or info@oraclelights.com if you need further assistance!
Hi, what if I have the oem factory LED DRL, would it still be the same process ?
yes, same process. You are connecting to the parking lights not the DRL so it does not matter either way.
ORACLE Lighting oh parking lights. How would I know which wire it is?
sneakrpick it’s connected to your amber side markers
@@ORACLElights Say I wanted to connect these to the DRL so they're always on. Which wire would it be? I connected mine as the video shows & love them so far, but am interested in changing the connection to the DRL's. I have a 2020 JTR.
@@Cypher1210 connect to fuse number F52 and these will always be on when the Jeep is running.
Need cutting wires?
No wires were harmed in the making of this video :)
What front bumper is that? Thanks
Rugged Ridge Arcus.
Can this be installed with an Under the Sun grill insert????
Yes, you will need to drill a hole in the insert but it does work.
ORACLE Lighting Have you seen anyone do it yet?
@@WaterDR-tw8re not personally but having dealt with those inserts in the past we are familiar with modifying them, it's just a mesh panel.
Can you run those @night??
Yes, the way we show you to connect them in the video allow them to be on at night along with the headlights.
Other than the music being a pain to listen to a good video