Tip Jar - Offset Setting on Vinyl Cutter
Вставка
- Опубліковано 30 лип 2024
- In this edition of Tip Jar from www.CADCUTdirect.com you'll learn how to adjust the offset setting on your vinyl cutter. Offset is one of the key settings to adjust when changing the degree angle of your cutting blade.
been in the biz for nearly 18yrs,... and as i always say, never too old to learn something new... THIS IS HUGE!!! amazing!! Great Tip!!
This I had learn a couple of years ago and I wish I had seen you vid before.
You explanied it so easy and simple, thanks a lot for that.
Just found your vid because I had to refresh about setting up my offset again
#thumbsup
Thanks for this. Just what I needed to know!!
mine was undercutting on specific fonts when they where smaller size. going to try this out but seems promising. thanks for the informative video
This was awesome!!!
Great advice. Thx
Good informative video sir👍
graphtec craft robo pro, 60 degree blade on card stock (and carrier sheet). i see two offset settings in the "plotter controller" window. one of them just say -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5. the other in "advanced" settings shows 30 degrees in the offset. should i simply keep the first offset at 0, and change the advanced offset to 60?
Thanks for the Knowles's this very impressed
Great video! I have a Roland PNC-960 It has a setting for "Over cut" what would the settings for that be and when would I use it? Bob @ Glass Art
I cut vinyl just as a hobby. Ever since i changed my blade on my cutter i am having this problem. Would you happen to know how to change the offset on a Master Tiger 1000 vinyl cutter? Any help would be greatly appreciated. Thank you
My Graphtec FC4100 cutter has an offset setting and my cutting software, Flexi, also has a place to set the offset. Which should I use?
Im using a vinyl Express. and my S, O and P are going jaggedy whenit cuts. have any idea why?
thats the best, Thank You for doing that
Can you tell me how to do this in a ce6000-60 graphitec
Excellent thank you 👍🏻👍🏻
is a GCC 24" Expert 24 Vinyl Cutter a good cutter?
josh good video but is there a standard for offsets with each blade over every machine? the makers of my cutter dont even exis anymore so i have no back up to seek the answer.
Thank You!
Thank you, Thank you, Thank you.
Thanks for the INFO :)
Excellent.
thank you!! no wonder weeding was so difficult LOL
What if letters keep over lapping when cutting.
Thanks alot
What stencil was used for this? I do engraving on stone and use HARTCO SANDMASK 25X20
10MIL and works great but I'm trying increase production and find that the weeding and transfer tape is very time consuming. Eliminating transfer tape can increase our time somewhat, unless anyone knows of other options? ANy help you can provide would be greatly appreciated, thank you.
Please reach out to Hartco's support by visiting hartcoservice.com/customer-support/
Sir plotter s721 ma small name ka kita konsa cutter best rahaga reply plzz
I amusing Sure-Cuts-A-Lot software, and in the output dialog on computer, it has an offset adjustment there, already, set to a [default .25].
Does this override the machine offset? Or does the machine override the settings I send with a job?
As this is not a product we offer, we can not provide operating assistance. However, please visit www.surecutsalot.com/ as they have support, forums, and tutorials available on their products.
So which one is the best??175 mm or 250??
Thanks..very useful
yay.....im doing something right!!!
Turn on cutter. select media type (roll,piece.edge) enter. press menu. then press down. @condition press right then down twice. then press right to edit then press enter to save
🎉nice
i turned on my new machine and it went to end and stayed banging against the end? help anyone?
Thankyou so much for explaining the offset, I purchased a chinese machine of ebay called a goldcut 720 and have been tearing my hair out to what the hell has been going on. I figured the machine was ok when I used the plot pen when all came out fine which prompted me to do a search on youtube for "Offset Setting on Vinyl Cutter" but of course the stupid machine only seems to have speed and force adjust with the offset needed to be done in the export I THINK ? Sold my roland years ago silly me
good and simple video, but we use 45 and 60 same with 0.250mm offset no matter in results...
Hi Men i have cut small letters but not close cut. in my setup window "CUTTING OPTION unit/mm", then i have "Close: 0.4" "Offset: 0.25" "Precision: 0.2" it´s wright this parameters or what suggest for each parameter. tnks men.
Please email qe@stahls.com to get assistance with this question.
Why i cannot get corect circle? i
what offset can you recommend for a 30 degree detail blade?
@anthony stone im after the same info. what did you find out??
Great tips, but for some reason can find the right setting for my cutter a P-Cut 630 :-(
Would be nice if you said what the offset is *actually* doing.
Hobo Hacker he did
I have a shitty old Chinese machine, doesn’t have offset setting, or I don’t know where to find it
Yeah, but it didn't explain what this actually does, how it changes the entry point of the blade. I'm none the wiser.