This has really nothing to do with cutting on a vinyl cutter but my questions is how did you get your windows to have those squares where your individual files are loaded?
got my redsail in 2013, i was mocked in the 'pro groups', here we are in 2021 its survived covid..... once i stood it upright (on its side) on my desk, then knocked it, it fell over in what seemed to be slow motion, it hit my mouse and keyboard, both shattered, the cutter then rolled off the desk and went with another big smash on the floor... i picked it up, the sled/knife assembly was just swingin on its belt, i clipped it back on, turned it on, it lived, i tried a cut, cut fine, didn't have to adjust a thing....
Nice vid.. Helpful for a starter me.. Looks so easy now.. Now maybe I will just need more clarification on the different settings for different materials to be plotted in my red sail plotter.😊
I inherited a complete sign business, even though i know how to weed, premask, and lay lettering, I’m not as good setting up the computer programs. I have an R series Ii And a new much faster plotter that cost $3100 from sign warehouse in late 2019. Used at my brothers home based business until he died suddenly in sept 2020. There’s tons of programs and 2 older computers. About 50 rolls of vinyl. What’s the best way to figure out the programs?
so i purchased a vinyl cutter r series II from some lady but didnt come with the software she assured me i can download it online i just seen the price to try to purchase which is way over my budget is there any other softwares thats not so much i can purchased bummed sign cut pro didnt work as i was using inkscape to mess around with my drawings easy cut i tried the demo it didnt even let me test out my cutter! very annoying. pleaser help!
Did you ever get your problem fixed bcuz mine is sending the job but the cutter is not responding? Don’t know if it’s the firewall settings or not but I’m operating off windows 10 pro
I wouldn’t take the guys in the blue shirt advice. He doesn’t know what the hell he is doing. Your Fired. The guy who is pointing out your mistakes I would listen to him & but from him. Now go and sell some use cars!!!
Terrible recording, but good info. The biggest question is why are these guys doing the opposite job to what they should be!? The guy behind the camera should be in front of it!
Dude Behide Tha Camera Makin Him Look Stupid AF & Makin Him Sound Like He Really Dont Know What He's Talkin About.... I Wouldn't Have Even Uploaded This Video!!!!
your the only other watching theses old ass tuturials,are they helping ?i thought they were then when i went back to fix my design i seemed to of forgot everything i thought i just was taught ?
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
I bet the camera guy was a hall monitor back in his school days 🤣🤣
if micro-management was a person... Maybe practice off camera first, so that your teammate doesn't look bad! great info either way. Appreciated
Poor planning, the guy behind the camera constantly interrupts and jumps into video. Perhaps they should switch roles.
Cutting Your Desgin on the Vinyl Cutter. Maybe Cutting Your DESIGN on the Vinyl Cutter?
This has really nothing to do with cutting on a vinyl cutter but my questions is how did you get your windows to have those squares where your individual files are loaded?
wouldn't want either of these guys doing my vinyl work... want it done right, I'll do it myself....
Ok. So how do you get the cutter to start where you want it, instead of say, in the middle of the roll of vinyl?
So did you get answer
You can sometimes do it in the software before you print
Sir how much price of this vinyl cutter..?
@@aminbinjameeljameel6810 around $1200
This one was the most helpful it's real
Wow Do these guys really know what they are doing?
I've had 2 or 3 of those redsail 720 plotters. They don't hold up for very long.
Just spend the money to buy a Roland.
got my redsail in 2013, i was mocked in the 'pro groups', here we are in 2021 its survived covid..... once i stood it upright (on its side) on my desk, then knocked it, it fell over in what seemed to be slow motion, it hit my mouse and keyboard, both shattered, the cutter then rolled off the desk and went with another big smash on the floor... i picked it up, the sled/knife assembly was just swingin on its belt, i clipped it back on, turned it on, it lived, i tried a cut, cut fine, didn't have to adjust a thing....
all is great!
Same cutting plotter please help my cutting plotter redsell 720c but usb not saport
Nice vid.. Helpful for a starter me..
Looks so easy now..
Now maybe I will just need more clarification on the different settings for different materials to be plotted in my red sail plotter.😊
haw i kan speed and slo my stecr meshen it burd kant werk
We can only cut vinyl , also we can cut transfer paper
hello bhaiya mere paas red cell ki machine fridge Mein cutting karta hoon toh Ruk Ruk cutting karti hai
Wich company this howmany prise or howmany size for floter please reply.
Tell the other guy that keeps interrupting to do his own video
It keeps telling me to set 2 inch below to the right .
Good camera
Flexi buy Krna padta h ya free milta h?
Como se llama el programa que se utiliza para corte
Hola pudiste encontrar porfavor el driver de este cuter para poder utilizarlo
I inherited a complete sign business, even though i know how to weed, premask, and lay lettering, I’m not as good setting up the computer programs. I have an R series Ii And a new much faster plotter that cost $3100 from sign warehouse in late 2019. Used at my brothers home based business until he died suddenly in sept 2020. There’s tons of programs and 2 older computers. About 50 rolls of vinyl. What’s the best way to figure out the programs?
YT videos. And practice
so i purchased a vinyl cutter r series II from some lady but didnt come with the software she assured me i can download it online i just seen the price to try to purchase which is way over my budget is there any other softwares thats not so much i can purchased bummed sign cut pro didnt work as i was using inkscape to mess around with my drawings easy cut i tried the demo it didnt even let me test out my cutter! very annoying. pleaser help!
just try the free software from silhouette works well
thanks guys im going to try
thanks guys im going to try purchased easy cut but want something abit easier.
silhouette works for vinyl express r series?
Need Redcell drivers for Windows 10 64 bit or Windows 7 64 bit drivers
great help
can this make reusable stencils
Is it possible to use 2 machines from 1 computer
Can this LXI sodtware be used to any cutter plotter brands such as Cameo 3 or CUYI?
Hola amigo, pudiste encontrar el software para poder usar este cutter
Help me CD Driver 340, Plotter Red Sail.
Painful to watch
how can I sort programs like your's on desktop ?
what's the program can do this ?
Like the cameraman knows more than the presenter, wonder why he did not do the video instead?
What settings with the r series 31 should the cutter be on for cutting glitter vinyl?
It sounds like this was recorded with a shoe.
How about the guy that knows what he's doing gets in front of the camera? What an obnoxious video.
The Raconteur I totally agree
The Raconteur yeah this guy is a fuckin douche
that guy abolutely lack any social IQ. I stoped watching .
the host knows less than the cameraman
Yah kitne voltage ki h
I need help cutting. I am not understanding how to cut the right size. ie I need 4 inch numbers. I dont know how to set it correctly. Can someone help
just find a new job if you cant figure that out
what size does this machine cut?
Hello dear, do you need a machine for vinyl work?
Hello 😊
I have a r 31 that uses a dongle have to use a Windows 7 don't have the 7 anymore what can I do?
Did you ever get your problem fixed bcuz mine is sending the job but the cutter is not responding? Don’t know if it’s the firewall settings or not but I’m operating off windows 10 pro
I need this machine, how much does it cost?
WHERE TO BUY THE VINYL CUTTER AT CHEAPEST PRICE
Stoped the camera coz it’s fuc.ked up 😂
Software Link Pls
فين فى اسيوط او مصر
Ok. So how
ارجو العذرة نريد تعريفها لحسوب
Supera
VinylMaster Cut (Basic Edition) or Vinyl Express LXi Apprentice Software. What is better?
Are they free or just trial version I just got a free uscutter but no software
Too much yapping, just do the job, no words needed.
Indigo Socratus then people would complain he's not explaining enough of what he's doing.
arnold Schwarzenegger comedy sketch
How much sale plotter?
Redsail Chian factory has promotion for RS 720c cutting plotter, if you have ineterest we can talk.
Haw many sale
What's the point of the guy making the video? You should have prepped him first or make a better video.
genius is holding camera and ....
Kothy Pabo ata
If Kylie Irving was white 😆.
First of what blade your using and setting 🤦🏽♀️
Your speed should be at least 400
S
I wouldn’t take the guys in the blue shirt advice. He doesn’t know what the hell he is doing. Your Fired. The guy who is pointing out your mistakes I would listen to him & but from him. Now go and sell some use cars!!!
"Desgin"...Ugh.
Terrible recording, but good info. The biggest question is why are these guys doing the opposite job to what they should be!? The guy behind the camera should be in front of it!
This plotter is too slow and makes a lot of noise, i cant see my self working all day with this plotter
Dude Behide Tha Camera Makin Him Look Stupid AF & Makin Him Sound Like He Really Dont Know What He's Talkin About.... I Wouldn't Have Even Uploaded This Video!!!!
this machine come from china.
Yeah, and so do the electronics and parts found on yours. 😉
i can’t stand the guy behind the camera.
Linsey Fitzgerald yeah that guy blows
Agreed. Interruptions galore. Rude.
Mr.Bean
Poor guy,
I don’t like the guy behind the camera
damn that was painful. if your going to make video's at least know what your talking about...
good info, bad presentation. thanks for trying.
Wow..He has no idea what hes doing. WTH
He don't know how to feed the vinyl 👎🏾
your the only other watching theses old ass tuturials,are they helping ?i thought they were then when i went back to fix my design i seemed to of forgot everything i thought i just was taught ?
This suck