I has to watch this again - it's marvelous....it looks like the real trick will be controlling this beast but I know your stop block approach and that will work nicely. Cheers mate.
Cheers Rick, Ive not had the chance to use it since i did the video, and yea will be making stop blocks in various sizes, The speed is great and i had wanted it twice that ! Im glad I didnt go that route now. Did you use the press on forged in fire? if so what did you think of it.
Great job. That looks amazing. I love my forge press. The ability to break down big stock is a heaven send. Also the ability to play with damascus is much easier. Game changer.
Good job Sir. Nice speed and tonnage. That is an impressive amount of steel moved in a single heat. Now several sets of kiss blocks and a few more sets of dies that you are ready to rock.
Now that's a game changer! Great piece of kit! You touched upon it at the end of your video when you said you needed to order more steel, but I'll suggest it anyway... You may find it more economical now to buy your carbon steel in larger cross section now and re-size it yourself with the aid of some "kiss blocks" of known thicknesses to act as stops in the press. The thinner steel bars marketed to us knife makers is often considerably more expensive than the round section used by machine shops etc. Have fun with your new toy, Happy squishing!
Great job on the press, I know how you feel, I built my press n power hammer n treadle hammer n all my grinders n forges it feels good to be able to do that
It looks great Loz,,nice and quiet as well ,(nice having it on wheels too) I see lots of damascus,axes ,hammers etc in your future ,(Ha Ha) well done mate. Cheers Jason
Nice work, well done on getting it done so quick. I would keep an eye on the temperature of that VFD now that it's enclosed in a box with no ventilation, you're probably fine as the duty cycle is low but keep an eye on it anyway. :-)
Yes i will mate thanks, i have the same set up on my grinder which runs for longer periods i did have a thermometer in there for a while but it never got above 25c
Hi Gary Thank you. sorry mate I didn't work off any plans or draw any and really you can build this to suit your ram size and workshop size, if I had had a much higher workshop I might have placed the ram on top it would have added around 3 feet though. cheers
Wow !! ...thats a beast ....i am a tiny bit jealous of the speed it flattens the steel :) Now in addition you need to start making some fullering dies (to stretch)and some patterning dies....so you do not need to make dust grinding the patterns. Thinking ladder , random pattern.
The PPP potty’s power pusher, great build mate, on your next vid could you tell us where you got the ram and stuff I want to make a wood splitter, Cheers Alan.
Only thing I would change on next build is reverse where ur ram is located , I would prefer my work piece to stay in place and not move up down with the dies , it's harder to control , it's better when press is pressing from the top onto ur work piece.
hey loz, i know you dont work from plans, but, how did you calculate for pump/ ram/ motor, do the beaver power packs not perform ? i'm really wanting to build a press but i always have to do things on the cheap (recycle/ repurpose) . It's a pleasure watching your vids, hearing a fellow northerner instead of american accents is cool too
Hi Chris, I did some calculations on the power pack and ended up phoning a couple of company's to see what they could provide to power the ram i wanted, there was not alot of difference in cost between building my own and having one purpose built for me, opted for the latter figuring the guys who build them know more than I do ;-) cheers
Hey Loz, My power pack arrived (same place as yours). Quick question on video 1, you adjusted something that doesnt look like the pressure relief value. I think its the part on top of the pump with an allen key. Am I right? Is that how you adjusted the pump to work quicker? Thanks in advance!
Hi Mate, Yes I remember on the vid that the ram didnt seem to be moving as it should and was adjusting something but actually I figured it was just air in the pipes and also the motor was not running at full speed initially when i ran it at 1400 rpm and the air was purged it was fine. So I didnt actually do any adjustments to the power pack.
@@LozHarrop thank you!!! Did you purge the air yourself? I have a leak currently on the top of my cylinder, where the bsp connector “connects”’. I checked out the connector and looks like it’s faulty. Ordered a new one. Apart from the small leak, works wonderfully. Just preparing all the steel for the push plate, sides, etc. So many “little bits” that need sorting eh!!! Did you use H13 steel for your dies? If so, where did you get the steel from mate. Thanks again for all the help and inspiration !!!
@@Doobrey Just work the ram up and down a few times mate you can hear the noise difference when the air is replaced by fluid. Yes its all the little bits and pieces that seem to take forever. The die plates are just mild steel and most of the dies are made from leaf spring, I got some 25mm thick ones from the scrap yard once you have one die you can then forge weld and press pieces of spring together into bigger blocks etc, some of the spring stock is hard to weld so I just mig all around the joints and press it into shape. it lasts well and so far there has been minimal deformation, I do need to make some taller dies but i will just mig weld more leaf spring pieces on top of the existing ones. look forward to seeing yours in action. Cheers.
Hey - That is such a sweet build. May I ask where did you pick up the power pack from please? Was it locally sourced and did it come with the control valve and motor or did you get these yourself?
Hi thanks, Yes I left the whole of the power pack to guys who understand hydraulics and what I needed from it. told them what i wanted regarding speed and tonnage. I then sourced the ram, motor and hoses to connect to the power pack myself. I got a good understanding of what i would need from the power pack after taking to the guys who put it together I doubt i would have the performance I have trying to figure it out myself its also alot quieter than it would have been had i gone down the route of parts i had put together on paper. Would have saved some money going DIY with the power pack but I am happy i spent the extra getting it right first time. Cheers.
@@LozHarrop Thanks for the prompt reply! I have been speaking to Kurtis over at Mikrospin! He is very impressed with your build! I am going to source the same setup as yourself (like you I don't know anything about Hydraulics!). Can I ask, the motor you sources, 3phases 4kw, 5HP? Did you get that from the same place or elsewhere? Same on the Inverter? Sorry, but I really want the same setup as you and it's better to ask !!! :D
@@Doobrey Cheers yes you just caught me online as you commented. Yes it was those guys I ended up going with . Motor 4kw 5 hp 3 phase, think it was an ebay seller as was the inverter the huan yang one. The ram came for ramco in Ireland just because they where the only ones who had one back then. hoses etc came from a local firm who did them on the spot. Cheers
@@LozHarrop hahahaha! Sorry Loz, but had hammers for a little while now. It's time to expand to a press also! Thank you for the sub I have subbed at you already! Final quick question on the inverter (bearing in mind, I am not an eleccy person), did you get a 4KW, 220V one to power the 4KW motor? I assume so, but wanted to check!
Hi Loz, Great job on your press. I know what VFD's do, but why did you use it on your press. What was your reasoning. I too will be building a press, and thought of using a VFD. My reasoning is that, the pump could be run at a higher speed when needed. Most that I seen install a pump of about 22 GPM but run a motor of 1740 RPM's. Which will move about 11 GPM's. have you installed a high volume pump ? Dave Gibson Lighting bolt Forge
Hi Dave, I only used a 3 phase motor because I was told single phase can fail with the constant switching on and off 3 phase is also smoother and costs less to run, The motor is 1400 rpm because the faster the revs the more noise the pump makes have seen some presses with noisy screaming pumps and didnt want that, The pump in fact the whole power pack I had the calculations done for me and the power pack built to operate the 30 ton ram to get the speed and tonnage I wanted. It actually turned out perfect in both, ant faster then it is now and it would be difficult to operate, the travel is an inch every 2 seconds with 24 ton of force. Cheers.
yes in the main, i bought the whole pack assembled because i couldnt be bothered working out all the elements needed to give me the speed and force, i could have maybe saved some money but the unit is compact and exactly how i wanted it.
It may be time to forge some proper tongs to handle your big billets! The tongs featured in this clip looked functional (barely!) and a bit on the shabby side. Great knives deserve good tongs! Love the press!
@@LozHarrop certainly looking forward to seeing you make proper Damascus billets with your new monster. I think I may have to begin to collect parts for my own press. Being residencial, a power hammer is out of the question. But a 30 ton high speed press would definitely make life easier. Keep forging!
It turned out very well. First I saw the motor and the hoses unprotected I thought he forgot something but you fixed it. I'm still confused and wondering about how the single phase input running a 5,5KW motor without blowing the fuses.
Thanks, I really dont know much about electrics but i had read that 3 phase motors use less power run through a VFD off single phase supply than the same size single phase motor. But that could be rubbish?
Just wanted to thank you for your video and info of your knife grinder as i built one same as yours and its great, now i am watching your forge press and its exactly what i have been contemplating for some time for my blacksmith shop here in Australia,, however,, i am thinking due to costs it will work out cheaper to purchase a 30 ton log splitter and transform it into a forging press with an electric motor such as your design,, i would like to ask if there is any benefit to the ram fitted beneath or above the workbed and do you know what the RPM of your motor is?? i am thinking 2800-3000rpm ?? thanks in advance,, and again great machine bud.cheers.
Hi Mate, Glad to help. The motor speed is 1440 rpm, i dont fully understand Hydraulics /motors vs pumps vs flow rate and all the other calculations that need to mesh to get the speed and force you want. The 20 ton log splitters do a good job and the speed is as important as the tonnage, if you can get one inch of travel every 2 - 3 seconds you will be fine, I do know that the pump will be rated for the speed the petrol engine shaft puts out so try and match it as near as possible or you may burn it out.
@@LozHarrop Thanks for the quick reply mate, i may have to check out the literature and specs on the pump that comes with the log splitter, i also watched Tims press build from Big dog forge and it seems to be a goer!! building the frame seems pretty straight forward, judging by what you accomplished, i prefer your design which is a typical traditional style of press as opposed to the single pillar designs i see, and l believe they all have some element of deflection with the open die set-up, but thats just my 2 cents worth,, thanks again bud.
No problem mate, forgot to add ram over or under really does not matter from my research. kept mine below to reduce the overall height of the press, also with the pumps if you run them at higher speeds they scream like crazy
@@LozHarrop yea true i been watching shane from blind dog blades and he went from 3000rpm to 1725 due to the noise,, i was wondering if the drop in rpm would slow down the ram speed?
@@plasmacutter1 i had ago many conversations with hydraulic makers most of it lost now but seem to remember motor speed was not linked to ram speed and force. More hp gives you those
Hi, this is all I have from the sales invoice but it does list the items used. Cheers. Item 1) 1 - off Power Pack Assembly K2/409/F18/A1-20/17GH/S09-V1-G00/N01/N128-PG90-MAR63250/N03-D05-A Consists Off: 3 Phase 3 Kw 4 Pole Electric Motor Central Manifold with Check & Relief (90-250 Bar) Gear Pump to Deliver 6.3 L/min . 20 Litre Steel Vertical Tank with Filler Cap & Drain Port/Level Gauge Pressure Gauge & Isolator Single Station Cetop 3 Valve P to T AB Block Manual Lever Spring Return 3/8” A & B Ports 1 - off Hydraulic Cylinder 120 Bore 70 Rod 150 Stroke
Congratulations. Glad to see someone happy for a change.
How friggin slick is this! Nice job man. I know I’m 4 years out of style, but super cool.
Cheers mate one of the best tools I ever made.
NICE! I will be using some of your design elements when I build my press.
Excellent design, cant wait to build something similar
what a treat glad you have it finished , still gathering some parts to make mine .
Thanks Wade, show us when you get it finished mate
Holy hell dude, that things puts out some force! That should do nicely. Great job!
This is very clever love your channel keep them coming cheers
Absolutely Brilliant! I can’t wait to see what this bad boy opens up for you. There’s nothing stopping you now! Cheers.
Thanks Aaron, me too suddenly my usual stacks look very small.
Lovely job!
Congratulations on the new press I just am finishing up mine as I speak. I'm sure it will open up a lot of new avenues for you. Thanks for the videos
thanks good luck with your build mate
Lovely bit of kit .
Well done mate. That works super slick. Great addition to the shop.
Thanks bud
What a great build Loz, Cheers, Martin
Thanks mate
You sir have got some serious skills! Very impressive build!
Thanks Billy
Really nice work sir...
I has to watch this again - it's marvelous....it looks like the real trick will be controlling this beast but I know your stop block approach and that will work nicely. Cheers mate.
Cheers Rick, Ive not had the chance to use it since i did the video, and yea will be making stop blocks in various sizes, The speed is great and i had wanted it twice that ! Im glad I didnt go that route now. Did you use the press on forged in fire? if so what did you think of it.
Great job. That looks amazing. I love my forge press. The ability to break down big stock is a heaven send. Also the ability to play with damascus is much easier. Game changer.
Agreed Ernest, got to resist the urge to give things one more squash though, especially damascus.
Excellent job on this monster.
Thank you! Cheers!
Good job Sir. Nice speed and tonnage. That is an impressive amount of steel moved in a single heat. Now several sets of kiss blocks and a few more sets of dies that you are ready to rock.
Thanks philip, yes i couldnt believe how fast it moved that leaf spring, would have taken me maybe an hour on the anvil
That’s pretty cool man! I’m building one right now....
Great Stuff Fella....! The Squisher works like a monster..!!! Cheers Loz.
Cheers Al
Very good work Pal and looking forward for your new knifes
Cheers
Now that's a game changer! Great piece of kit! You touched upon it at the end of your video when you said you needed to order more steel, but I'll suggest it anyway... You may find it more economical now to buy your carbon steel in larger cross section now and re-size it yourself with the aid of some "kiss blocks" of known thicknesses to act as stops in the press. The thinner steel bars marketed to us knife makers is often considerably more expensive than the round section used by machine shops etc. Have fun with your new toy, Happy squishing!
Thanks bud just worked on my first billet quite a revelation
Very good job !!!
Thank you! Cheers!
Just call him Mr.Happy! Well done indeed.
congrats on the build, what an awesome machine. I think it should be called "The Smashinator"
Cheers mate
it's given a little of what she's got captain. most excellent !
I really plan to do the same, thanks to you !!
great piece of Kit still working great
Excellent.
Tah dah.....awesome job bro
cheers mate
Great job on the press, I know how you feel, I built my press n power hammer n treadle hammer n all my grinders n forges it feels good to be able to do that
Stuff like this is very difficult to source in the UK unless you have very deep pockets
You look like the happiest 'guy' on UA-cam!
Call it “ The Animal” its bloody impressive!
It looks great Loz,,nice and quiet as well ,(nice having it on wheels too) I see lots of damascus,axes ,hammers etc in your future ,(Ha Ha)
well done mate.
Cheers Jason
Cheers Jason, yea im chuffed with it mate, just ordered some 15n20 and 1095, looking forward to see yours in action too.
Fan-bloody-tastic!
Great job, going to borrow your design and get started on my own press.
thanks mate Go for it!
Great gizmo.
Loz, what a great idea of keeping the majority of the weight below the working height to make it more movable. "Big Birtha" is looking good!!!
Cheers Joe yes real easy to move considering the weight of the thing
Nice work, well done on getting it done so quick.
I would keep an eye on the temperature of that VFD now that it's enclosed in a box with no ventilation, you're probably fine as the duty cycle is low but keep an eye on it anyway. :-)
Yes i will mate thanks, i have the same set up on my grinder which runs for longer periods i did have a thermometer in there for a while but it never got above 25c
Fantastic job matey that press is a fucking beast! 😉👍
Best tooling I made bud cheers.
What a nice press! And two great videos! Thank you for sharing! Is there a set of plans that I might be able to buy from you?
Hi Gary Thank you. sorry mate I didn't work off any plans or draw any and really you can build this to suit your ram size and workshop size, if I had had a much higher workshop I might have placed the ram on top it would have added around 3 feet though. cheers
Wow !! ...thats a beast ....i am a tiny bit jealous of the speed it flattens the steel :) Now in addition you need to start making some fullering dies (to stretch)and some patterning dies....so you do not need to make dust grinding the patterns. Thinking ladder , random pattern.
Thanks, yes need to make plenty of dies for sure, have started cutting up the 10mm plate to hold them.
The PPP potty’s power pusher, great build mate, on your next vid could you tell us where you got the ram and stuff I want to make a wood splitter,
Cheers Alan.
Hi Alan, I just bought the whole power pack from a company called microspin in bolton, the ram came from Ramco in Ireland, both delivered to the door
very nicely done.. Ive built one similiar just not quite as nice and with rectangle die plates(mistake)..I do wonder why the vfd?
I wanted to see how that works they stood I want to send a video where you where you working with your machine
Name it Brutus.
GREAT!
thanks Eric
Should make your sanmai experiments easy!
🙏🙏🙏please explain the specifications of the power pack I want to make a forging machine like that🙏🙏🙏🙏
Holy crap!
holy flat crap
@@LozHarrop indeed buddy, are you releasing plans for this epic press. Also, what was the total build cost? Including power pack, ram etc etc
Also, would it be a good idea to have a protection sheet over the power pack buddy?
Lol, u did it, I hadn't got that far into the video lol
What are the specs on the hydraulic pump you are using? GPH? single stage or 2-stage?
Super build! How is the press holding up? Are you still satisfied with it. And what rpm is the motor 3000rpm or 1500 rpm. Thank you and take care👍
Press is still going strong mate, the motor is 1500 rpm if it was 3000 I recon the pump would scream like a banshee! cheers
👍👍
Only thing I would change on next build is reverse where ur ram is located , I would prefer my work piece to stay in place and not move up down with the dies , it's harder to control , it's better when press is pressing from the top onto ur work piece.
hey loz, i know you dont work from plans, but, how did you calculate for pump/ ram/ motor, do the beaver power packs not perform ? i'm really wanting to build a press but i always have to do things on the cheap (recycle/ repurpose) . It's a pleasure watching your vids, hearing a fellow northerner instead of american accents is cool too
Hi Chris, I did some calculations on the power pack and ended up phoning a couple of company's to see what they could provide to power the ram i wanted, there was not alot of difference in cost between building my own and having one purpose built for me, opted for the latter figuring the guys who build them know more than I do ;-) cheers
What size is the hydraulic pump? GPM, PSI and rpm's?
Now you need to figure out how to rig up a way to adjust a travel stop so you get the same travel for thickness you won't nice job 👍
thanks greg yes making stop blocks of various thicknesses
Squishy McSquishface
Anymore roller videos??
Are you shore you are not using butter it makes easy work of the hot metal
Hey Loz, My power pack arrived (same place as yours). Quick question on video 1, you adjusted something that doesnt look like the pressure relief value. I think its the part on top of the pump with an allen key. Am I right? Is that how you adjusted the pump to work quicker? Thanks in advance!
Hi Mate, Yes I remember on the vid that the ram didnt seem to be moving as it should and was adjusting something but actually I figured it was just air in the pipes and also the motor was not running at full speed initially when i ran it at 1400 rpm and the air was purged it was fine. So I didnt actually do any adjustments to the power pack.
@@LozHarrop thank you!!! Did you purge the air yourself? I have a leak currently on the top of my cylinder, where the bsp connector “connects”’. I checked out the connector and looks like it’s faulty. Ordered a new one. Apart from the small leak, works wonderfully. Just preparing all the steel for the push plate, sides, etc. So many “little bits” that need sorting eh!!! Did you use H13 steel for your dies? If so, where did you get the steel from mate. Thanks again for all the help and inspiration !!!
@@Doobrey Just work the ram up and down a few times mate you can hear the noise difference when the air is replaced by fluid. Yes its all the little bits and pieces that seem to take forever. The die plates are just mild steel and most of the dies are made from leaf spring, I got some 25mm thick ones from the scrap yard once you have one die you can then forge weld and press pieces of spring together into bigger blocks etc, some of the spring stock is hard to weld so I just mig all around the joints and press it into shape. it lasts well and so far there has been minimal deformation, I do need to make some taller dies but i will just mig weld more leaf spring pieces on top of the existing ones. look forward to seeing yours in action. Cheers.
Hey - That is such a sweet build. May I ask where did you pick up the power pack from please? Was it locally sourced and did it come with the control valve and motor or did you get these yourself?
Hi thanks, Yes I left the whole of the power pack to guys who understand hydraulics and what I needed from it. told them what i wanted regarding speed and tonnage. I then sourced the ram, motor and hoses to connect to the power pack myself. I got a good understanding of what i would need from the power pack after taking to the guys who put it together I doubt i would have the performance I have trying to figure it out myself its also alot quieter than it would have been had i gone down the route of parts i had put together on paper. Would have saved some money going DIY with the power pack but I am happy i spent the extra getting it right first time. Cheers.
@@LozHarrop Thanks for the prompt reply! I have been speaking to Kurtis over at Mikrospin! He is very impressed with your build! I am going to source the same setup as yourself (like you I don't know anything about Hydraulics!). Can I ask, the motor you sources, 3phases 4kw, 5HP? Did you get that from the same place or elsewhere? Same on the Inverter? Sorry, but I really want the same setup as you and it's better to ask !!! :D
@@Doobrey Cheers yes you just caught me online as you commented. Yes it was those guys I ended up going with . Motor 4kw 5 hp 3 phase, think it was an ebay seller as was the inverter the huan yang one. The ram came for ramco in Ireland just because they where the only ones who had one back then. hoses etc came from a local firm who did them on the spot. Cheers
Oi Mr Doodrey! your totally not allowed to have a power hammer and a press thats not fair but subbed you anyway ;-)
@@LozHarrop hahahaha! Sorry Loz, but had hammers for a little while now. It's time to expand to a press also! Thank you for the sub I have subbed at you already! Final quick question on the inverter (bearing in mind, I am not an eleccy person), did you get a 4KW, 220V one to power the 4KW motor? I assume so, but wanted to check!
Hi Loz, Great job on your press. I know what VFD's do, but why did you use it on your press.
What was your reasoning. I too will be building a press, and thought of using a VFD. My reasoning
is that, the pump could be run at a higher speed when needed. Most that I seen install a pump
of about 22 GPM but run a motor of 1740 RPM's. Which will move about 11 GPM's. have you installed
a high volume pump ?
Dave Gibson
Lighting bolt Forge
Hi Dave, I only used a 3 phase motor because I was told single phase can fail with the constant switching on and off 3 phase is also smoother and costs less to run, The motor is 1400 rpm because the faster the revs the more noise the pump makes have seen some presses with noisy screaming pumps and didnt want that, The pump in fact the whole power pack I had the calculations done for me and the power pack built to operate the 30 ton ram to get the speed and tonnage I wanted. It actually turned out perfect in both, ant faster then it is now and it would be difficult to operate, the travel is an inch every 2 seconds with 24 ton of force. Cheers.
Is it just motor, pump, spool valve hoses and cylinder for the hydraulic parts needed?
yes in the main, i bought the whole pack assembled because i couldnt be bothered working out all the elements needed to give me the speed and force, i could have maybe saved some money but the unit is compact and exactly how i wanted it.
Could i ask where you bought your ram and pump etc please? Best Mic Brechfa Knives UK
Hi, yes the ram cam from ramco in ireland on a pallet and the whole hydraulic set up was from Microspin ltd in the uk. also came on pallet.
ppotty1 thank you 👍🏻 best regards Mic Brechfa Knives
It may be time to forge some proper tongs to handle your big billets! The tongs featured in this clip looked functional (barely!) and a bit on the shabby side. Great knives deserve good tongs! Love the press!
Yes agreed, I picked them up years ago at a boot sale pretty useless but the only ones i had to hold that bar.
@@LozHarrop certainly looking forward to seeing you make proper Damascus billets with your new monster. I think I may have to begin to collect parts for my own press. Being residencial, a power hammer is out of the question. But a 30 ton high speed press would definitely make life easier. Keep forging!
How many kW or HP is your power pack motor? Is it 240V(I'm Aussie)
Hi, its a 5hp three phase 1400 rpm run off an inverter
I’ve got to figure how to fix my die platform to the ram end
It turned out very well. First I saw the motor and the hoses unprotected I thought he forgot something but you fixed it.
I'm still confused and wondering about how the single phase input running a 5,5KW motor without blowing the fuses.
Thanks, I really dont know much about electrics but i had read that 3 phase motors use less power run through a VFD off single phase supply than the same size single phase motor. But that could be rubbish?
@@LozHarrop anyway it works 👍have fun with your new squishi machine ☺️
Just wanted to thank you for your video and info of your knife grinder as i built one same as yours and its great, now i am watching your forge press and its exactly what i have been contemplating for some time for my blacksmith shop here in Australia,, however,, i am thinking due to costs it will work out cheaper to purchase a 30 ton log splitter and transform it into a forging press with an electric motor such as your design,, i would like to ask if there is any benefit to the ram fitted beneath or above the workbed and do you know what the RPM of your motor is?? i am thinking 2800-3000rpm ?? thanks in advance,, and again great machine bud.cheers.
Hi Mate, Glad to help. The motor speed is 1440 rpm, i dont fully understand Hydraulics /motors vs pumps vs flow rate and all the other calculations that need to mesh to get the speed and force you want. The 20 ton log splitters do a good job and the speed is as important as the tonnage, if you can get one inch of travel every 2 - 3 seconds you will be fine, I do know that the pump will be rated for the speed the petrol engine shaft puts out so try and match it as near as possible or you may burn it out.
@@LozHarrop Thanks for the quick reply mate, i may have to check out the literature and specs on the pump that comes with the log splitter, i also watched Tims press build from Big dog forge and it seems to be a goer!! building the frame seems pretty straight forward, judging by what you accomplished, i prefer your design which is a typical traditional style of press as opposed to the single pillar designs i see, and l believe they all have some element of deflection with the open die set-up, but thats just my 2 cents worth,, thanks again bud.
No problem mate, forgot to add ram over or under really does not matter from my research. kept mine below to reduce the overall height of the press, also with the pumps if you run them at higher speeds they scream like crazy
@@LozHarrop yea true i been watching shane from blind dog blades and he went from 3000rpm to 1725 due to the noise,, i was wondering if the drop in rpm would slow down the ram speed?
@@plasmacutter1 i had ago many conversations with hydraulic makers most of it lost now but seem to remember motor speed was not linked to ram speed and force. More hp gives you those
What does the vfd do for this?
It powers the 3 phase motor that runs the hydraulics mate
where did you get the ram itself from ?
came from Ramco in ireland
What KW motor did you install?
4kw 3 phase
I want to Make a Press by myself but i dont know how to Make the Hydraulik...:(
How many tons mate? Cheers
its a 30 ton ram but it puts out 25 tons mate
and how many tons are you
around 25 tons
Three rubber grommets on the foot pedal base
🙏🙏🙏please explain the specifications of the power pack I want to make a forging machine like that🙏🙏🙏🙏
Hi, this is all I have from the sales invoice but it does list the items used. Cheers.
Item 1) 1 - off Power Pack Assembly K2/409/F18/A1-20/17GH/S09-V1-G00/N01/N128-PG90-MAR63250/N03-D05-A Consists Off: 3 Phase 3 Kw 4 Pole Electric Motor Central Manifold with Check & Relief (90-250 Bar) Gear Pump to Deliver 6.3 L/min .
20 Litre Steel Vertical Tank with Filler Cap & Drain Port/Level Gauge Pressure Gauge & Isolator
Single Station Cetop 3 Valve P to T AB Block Manual Lever Spring Return 3/8” A & B Ports 1 - off Hydraulic Cylinder 120 Bore 70 Rod 150 Stroke