Well Insulated Gas Forge 🔥
Вставка
- Опубліковано 25 чер 2024
- Making a propane gas forge for blacksmithing.
Uses the same venturi burners I made for my smelting furnace, video about those here:
• Forge / Furnace Ventur...
Forge construction from outside in:
Steel water pressure vessel tank
5cm thick ceramic wool
High allumina castable refractory
Refractory bricks for inside base and doors
The ceramic wool is glued to the walls with specific ceramic wool glue and rigidized with
colloidal silica (tinted blue with food coloring to check covering).
0:00 Frame Preparation
1:42 Ceramic Wool Insulation
4:12 Inside Chamber Mould
6:41 High Allumina Castable Refractory
8:08 Feets And Burner Holders
9:21 Forge Doors
12:04 Counterweight
12:50 Long Pieces Rest
15:19 Test
My new tig welder:
DE: www.expondo.de/stamos-power-2...
ES: www.expondo.es/stamos-power-2...
IT: www.expondo.it/stamos-power-2...
Use code "BlackBeard20" for 20€ discount on minimum order value of 200€
Some of the stuff I use for my projects is listed in this amazon storefront:
www.amazon.com/shop/blackbear...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - Навчання та стиль
Hey! If you liked this one I made another, smaller, longer and also easier to make! Check it out here: ua-cam.com/video/rpSrvsgX5fM/v-deo.html
غععع5
Lager finden
What did you treat the insulation with? The blue liquid?
@@aissakorti9976 qqqqqqqqqqqqqqqq
@@jsmeninick91 hi did you figure out what the blue liquid was??
I love most of the stuff you build/restore are integrated into you're workshop. When you see it in action, you go "oh yeah, I remember that," and go the down the rabbit hole of past videos.
I've been highly critical of what passes for refractory insulation on UA-cam. You've restored my faith in humanity.
Oof that's savage
Its just kaowool
With sodium silicate sprayed on...
@@AA-zv6yo Yes...Kaowool. Against this there are well over ten million views of videos touting Plaster of Paris and sand.
Man this was an excellent build! I love the thought you put into the burner holders, forge door, etc
Thanks brother! Cheers!
the two chanel i subcribe it
When I watch him creating your the first person that comes to my mind. Y’all two are my absolute favorite channels to watch for learning.
Awesome. Both of you supporting each other. And folks like me found you separately. Both of you guys are awesome. Love all the stuff. Keep it up.
I’m so happy to see all the new toys(tools) you have today. I’ve really enjoyed watching you progress over the years. You are a truly gifted craftsman of so many trades. I look forward to more years of watching you grow and inspire so many. In all languages. Continue to be blessed by our creator.
What a well thought-out build. It's crazy to think we've all basically watched you build your shop from a tiny space with entry level table-top tools to an all-encompassing work shop with high-end powerful tools that you, yourself, either restored or created yourself. Amazing work man, and an absolute pleasure to watch.
What a pleasure it must be to see self-made tools. I am left with a work of art !!!!
Всегда поражаюсь его находчивости и мастерству. Однозначно класс.
66663
It is really really good to know what the finished product looks like before you start. It makes it look like your a
genius when you make something beautiful on the first try.
Simply BRILLIANT. Every thing you need and nothing that you don't. Best gas forge that I have seen.
Tbhat was Awesome man! Great job!
Very, very nice job. This is my absolute favorite propane bottle forge build i have seen to date. I love the attention to detail you showed, and that you were following your obviously well thought out plans.
Love it.
I have seen more than a dozen home forges on UA-cam. Without a shadow of a doubt this was the best thought out a end product that I have seen so far. Great job.
Thanks Colin. Means a lot.
Different League
Homemade? The guy has got a tig and a lathe. Not many homes with those tools
@@christophernikolaou8009 It's all about your priorities. Save up over time -- neither a Tig nor a lathe are out of reach, even for men of humble means. Just steal $20 from yourself once every week or two and stick it in a can in the shop -- before you know it, you'll have your tool money. I just got my first welder, which took me over a year to save up for because I don't earn much and support a family -- it can be done! Like Jason Knight says, "Sell the gold coin collection" (or whatever other non-critical thing you're spending that $$ on -- almost everyone blows some portion of their income on something.) Welder, blacksmithing tools, a drill press, bench grinder... A lathe is nice to have, but not critical, a 1x30" belt sander is like $50 on harbor freight and can do a LOT of grinding with cheap belts, if you don't have a 2x72, etc. Tools are never a bad investment!
I replaced my well saver back in February and have been eyeing the old one with exactly this in mind.
Great use of an old expansion tank. I'm in the heating business so I must have at least 20 of these just laying around. I'm always on the lookout for stuff to use them for because scrap prices are so low.
Im honestly always blown away by how well thought out your project are 👍
Check description for list of products and operations.
If you like what I do consider supporting me so I can keep on making. Join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
Hello. Tell me what kind of substance you are pouring, blue, refractory mat?
How long does the internal insulation last?
@@Heinserable it's in the video description.
١٣٤٥ع٦٧٨٩١٠
99⁹
It was awesome. You captivated my attention to all the details of your work. Left me with no words. Excellent job. I can't wait to see what's next. Thank you for the art created.
I'm toying with the idea of building a forge. I have an old helium canister in the back of my garage... This is by far one of the best builds I've seen of all forges I've watched being built on UA-cam...
Thank you for the inspiration 👌
I'm envious of your skill and imagination. I wish I had the ability to do the things you do. Very inspiring! Keep up the great work!
Using the heat gun to re-activate the glue is genius. I never thought of that.
Brilliant, Awesome, artistic. Much respect.
Your Scrap/DIY/Fabrication projects are my favorite videos.
I haven't used pain remover before because I thought it would end up being a mess but it's not, it dries up and peels it away nicely. I like your design. ThankQ for sharing.
This is the most useful diy forge I've seen so far
Awesome forge, such a beautiful work
Excellent build Mr. Beard!
Well thought out and executed.
The fast-forward parts can just as well be his normal pace of work with great quality maintained. Good work!
Your creativity is always amazing !
Absolutely amazing! You have to be the most talented person ever! Outstanding, there is no end to your goodness!! I want to be on your zombie apocalypse survival team!
Beautiful design, loved watching you make it.
Beautiful forge, expertly created! Keep up your great work, dude! 🍻🤘💜
I got to say this is the best homemade looking forward I have ever seen on UA-cam. Beautiful job thanks for sharing.
the most talented man I've ever seen.who loves his job.I wish you great achievements.Although it is not the field I work in, I enjoy watching you
Thanks for sharing the forge build. I like the way you poured the castolite. Nice and simple burner holder and adjusters.
Lovely when a plan comes together
What a happy little forge
Very well done! I really like how you did the weighted wire door.
Mr. Beard defines the term Master Craftsman. CAN I GET AN AMEN?!
Thanks for all your well done and entertaining videos!
This man can easily survive a zombie apocalypse no doubt
Idiot
The zombies won't survive him.
Not without a propane supplier, heh. :)
In a group of people, being a blacksmith - yes, alone - no)
We forget that before each person was a hunter, a builder, and a carpenter .. In short, what you had to do was to do it yourself, just like in the zombie apocalypse, if you are the best blacksmith, you will have the best weapon (from what you can do) but you have to strain to find food, shelter, etc. .. But this is clearly a better skill than let's say some kind of manager, lol ..
Lots of access to power tools, solvents and propane after the apocalypse eh?
This is the perfect forge!!! So awesome.
True! Nice to observe how beautiful its the creativity!
Absolutely beautiful job, absolutely.
WOW!!! Just wow 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻
Absolutely amazing!
Very very nice dude! I've been thinking about my next forge design for a while and this build has really helped work out a few issues I had. Thanks so much! :D
Awesome build, it looks great!
Nicely done, you make it look easy. Great welding rig too by the way
Well thought out, and I really like the adjustable stock holder👍
Man, this is a great looking forge. Great video!
Amazing build as always
An absolute thing of beauty BBP.
2:35 just remembered my plants need fresh water and im all out. Off to the mart. Thanks mate
Most interesting thing I've seen on UA-cam in quite a while.
Absolutely brilliant and extremely well thought out and designed best yet......many thanks.....
Супер, наблюдать за вашей работой и изобретениями
That is really cool the doors how you designed them man one of the best homemade gas forges I have ever seen made for sure
before the half way i was really baffled... Is he really gonna do the internals of a forge from wood and hotglue :D ?
Same
+
I was even confused by the tube, even if it was stainless it wouldn't last very long as a forge liner.
Beautifully done!
Amazing work, really nice result !
What an amazing design!
AWESOME!!! nice build, im also happy to see you got a tig machine =) loved the old stick wleder, but you will find yourself being able to do way more with the tig =)
Some really skilled and ingenious fabrication. Well done.
That was definitely a well put together forge. Great work on designing and completing that build.
This is the best engineering I've seen in all my earthly days!
Masterpiece!
...Good one, nice work, that should do the job...stay safe..
Wow brother! Your metal working and construction skills are amazing! Outstanding work!!! 👍👍
FANTASTIC JOB! very well done!
Compared to the things I see every day there’s like 6 maybe 7 levels of genius on this build.
Highly commendable.
an insanely beautiful forge
That is one efficient system you have created. Well done
Piece of art!
I am in awe of you.
I just love your enginuity! Brillant build!
It feels a lot more educational without any sound, this is really good
The forge came out very nice.
SO HAPPY YOU MADE THIS VIDEO! 😊🙌🏼👍🏼
omg you did it!!
I don't know if I've ever seen a nicer job!!
I just turned a larger one of those into a forge! I wish I had waited though, this one looks a LOT nicer than mine...
You are a genius.
extremely clean, beautiful and amazing creation!!!
Fabulous job. Love the concept
Nicely executed plan
Forge, that just rocks. Nice
Simply amazing workmanship.
Amazing work as usual!
Perfect execution!
Very well done, Made mine from a gas bottle with 3 burners , good for long jobs. :)
BRAVO!!!!
A masterpiece!
Достойно уважения 🙌
Pure genius! Love it
Esta forja com toda certeza , e uma das mais bem feitas que eu já vi no UA-cam , não estou quero desmerecer minguem , est a de parabéns.
great design! every day i wish i had a welder more and more haha
Pretty amazing engineering my friend! Very cool.
Excellent!!
Brilliant!