can u cut two film at the same time on one window so that u can save more time to cut the other side's film? i saw another video and he did it as i said. but what i am concerned about is the film will be too dark to cut. what do u think? do u think its gonna save a lot of time?
absolutely, i do commercial tint for new car dealerships. ill cut up to 8 windos and shrink up to 4 at a time. back glass is the only thing that id say only shrink one at a time, unless youre using a wet shrink.
Newb question but how come you line the tint along the bottom window seal are you supposed to leave a lil bit extra so it tucks when you apply it on the other side
and can u tell me the tip on how to install film without moving it too much at once after removing clear release? is there anything i should be cautious about?
Maybe for you professionals but that shit would have been stuck together on me as soon as I took it off front window. Let’s skip step 1-5 and go right to 6 please lol . Great job btw!!! 💪
tint master I’ve seen all of your videos actually. Been following now for 3 years and I actually started learning from you. Seen you come a long way now with your new shop ShineTek. Thanks for all your help man. One day I’ll open up a shop too, just working on getting the clientele and becoming better at my tinting skills each day
When you roll down the window you cut right along the top of the window. When you install it you will leave a little more than 1/8" gap between the top of the film and the top of the window leaving you that much to tuck in at the bottom.
Those spots you are seeing is dust / dirt between the window film and the glass. make sure you are not in an area with a lot of air flow (windy) and also make sure you are properly preparing the window to be tinted.
I called solor gard im planning to take the training course. they ask me how I heard about them. I told them I got it from you tube video by platinum... they have a training class @ key largo.. Any help on tools I should get...
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I have some tint and some time, but this video made me want to find a professional ! You can't get technique like this from a video, only experience.
very informative upload yet again. Keep it up man we are loving your vids even if its as simple as doing just one window. Thanks
Thank you!
@@WindowTintWarriors what app liquid is that? rapid tack?? Thanks, great and informing vid!!!
no heat shrink on these silverados?
plus using heat gun for top window. is it really necessary?
Just for the annoying ass what I call triangles, people call them fingers and all that
Nice job. You made it look easy. Was that just water you sprayed or was it mixed with alcohol?
dang bro... you made it look so easy lol. Nice work!
can u cut two film at the same time on one window so that u can save more time to cut the other side's film? i saw another video and he did it as i said. but what i am concerned about is the film will be too dark to cut. what do u think? do u think its gonna save a lot of time?
take your time and cut one at a time. trust me, its easier to do one at a time
absolutely, i do commercial tint for new car dealerships. ill cut up to 8 windos and shrink up to 4 at a time. back glass is the only thing that id say only shrink one at a time, unless youre using a wet shrink.
Yes u can
Newb question but how come you line the tint along the bottom window seal are you supposed to leave a lil bit extra so it tucks when you apply it on the other side
How did you get the curve of the window and no light gaps!?
If you put it so that you do not have any bubbles left in the rear view mirror, all your videos are excellent
Aviezer Olguin thank you!
Tint % applied?
By any chance have you done an 81 chevy silverado windows?
Great videos! I learned a lot, THANK YOU SIR!
and can u tell me the tip on how to install film without moving it too much at once after removing clear release? is there anything i should be cautious about?
spray soapy water on the window and the adhesive side of the tint. it should move around just fine
Dosent the tint go inside?
Hi nice work. I live in south jersey is there anybody you can recommend where I live. thanks 2014 camry back windows done
Does the blade no leave scratches on the glass when you cut the film ? Or are you not even touching the glass ????
It will if you press to hard/have the blade too far out. Only use stainless steel blades
Maybe for you professionals but that shit would have been stuck together on me as soon as I took it off front window. Let’s skip step 1-5 and go right to 6 please lol . Great job btw!!! 💪
Dang, I don't know why but it's so hard for me to tuck in the last corner
Do you not shrink trucks?
Will a 20” roll cover the side windows?
Yes 20" is enough, you have to use 24" if you want to do ford f150 f250 f350 front windows
I have a couple videos hope you see them and like them
tint master I’ve seen all of your videos actually. Been following now for 3 years and I actually started learning from you. Seen you come a long way now with your new shop ShineTek. Thanks for all your help man. One day I’ll open up a shop too, just working on getting the clientele and becoming better at my tinting skills each day
What film do you use?
How do you put the strip in front
Aviezer Olguin are you referring the a strip across the top of the windshield?
Do you have to pull tint down to leave an excess to tuck in ?
When you roll down the window you cut right along the top of the window. When you install it you will leave a little more than 1/8" gap between the top of the film and the top of the window leaving you that much to tuck in at the bottom.
I need help I keep getting white dots when I tint my windows. Any Solution for it?
Those spots you are seeing is dust / dirt between the window film and the glass. make sure you are not in an area with a lot of air flow (windy) and also make sure you are properly preparing the window to be tinted.
Ohh, I tint windows in my garage, maybe thats why. Thanks for your help!
well as long as the garage is closed and there is not a lot of floating debri then the problem is most likely your preparation techniques
Thank you very much!
Yes it is
I'm not sure if solar gard lets you keep the tools you trained with. Who do recommend where I can get a good deal on starter kit tools...
watch my tint tool explanation video and check out zoladist.com
No shrinking ??
Doesn't tint normally go on the inside?
No. Always on the outside 🤭
@@WindowTintWarriors 😂
Where are from?
just put a tint strip on a 35 ford 1/2 ton pickup today… that was not too fun 😂 not compared to doing newer cars
I called solor gard im planning to take the training course. they ask me how I heard about them. I told them I got it from you tube video by platinum... they have a training class @ key largo.. Any help on tools I should get...
Great to hear! Best of luck to you!
Tint percent applied?
Vic O. I believe that was 35%
Its easy...when u know what ur doin!
Молодец- достойная работа.
Freaky beats hahah!!!
he is good becos he shows how to cut the tint with the air press/vent on...
Thank you
You look great with your mom's earrings sweetie. That was so 1998 dude. Like goatees and black rims on cars LOL.
jim davidson you must be bored
You must be just starting to tint windows. You will get faster, great work though