This is à good example of do what you can with what you have. I am afraid the metal blade is beyond repair, tho. The rusty, pitted surface will not allow it to slide through the cut, and grinding the teeth like this has dulled them more, probably making it impossible to use.
I'm in my 70's and we use to do this sort of stuff way back when and it was called old school you learnt to repair stuff instead of just going out and buying a new one.
I think he is smarter than most of you give him credit. He’s not intending to use that dull old saw,he’s making a video to show the possibilities of a creative mind. Well done my friend.
Kreatif bagus sekali ide nya dari sebuah paralon menjadi gagang gergaji mantap dan hasil nya oun enak fi genggam kaya nya simple lagi.keren bang sukses sehat terus dan tetap semngat berkarya aamiin
IT HAPPENED TO MY VINTAGE SAW AND I USED 7/8 INCH PLYWOOD AND REPLACED THAT WOODEN HANDLE. MORE STRONGER AND WONT TEAR APART. THEN REPLACED THE BOLTS WITH ALUMINUM RIVETS. I KNOW THAT THE MATERIAL YOU ARE USING ARE NOT FOR TOO MUCH TIME AHEAD.
Am I the only one who gets scary when I see no shoes on everyone there? 😕 great way to teach people on UA-cam. I do like the fix, I'm not a total asshole! Just be safe.
❤я себе сделал ручки к ручным пидам из корня старой груши. Плотная древесина, направление волокон крученое. А у мужичка, я смотрю обычная доска с прямыми волокнами. Вот ручка и раскололась.
How much time did you spend fabricating a homemade handle? How much is your labor worth? How much would a new saw cost at a local big box store? After all that labor, you still have a saw blade that is rusty, pitted, and dull.
Good technique idol. God bless.
This is à good example of do what you can with what you have. I am afraid the metal blade is beyond repair, tho. The rusty, pitted surface will not allow it to slide through the cut, and grinding the teeth like this has dulled them more, probably making it impossible to use.
Great way to recycle ♻️ and very cool idea
I'm in my 70's and we use to do this sort of stuff way back when and it was called old school you learnt to repair stuff instead of just going out and buying a new one.
Hola
вы правы , уважаю .
We all did. That’s when your time was considered worthless.
should have put self-locking washers on the nuts
I loved how he uses his toes as clamps , brilliant 😊😊😊
Good thing his safety boots/shoes had holes in the end 😂 (safety first)
Genial. Excelente idea. Lo practicaré.
You're a great man thanks alot for sharing your idea
Un invento sencillo pero genial muchas gracias
Other than not using washers with the nuts, great fix!
Best Idea 👌👍
Awesome video! The detailed and creative instructions make it easy to fix an old saw at home. Thank you for sharing this useful tip!
Muito bom ❤😮😮😊
Great work! In this case I would have faithfully and carefully glued that beautiful old handle back together.
it will work that is all that counts..!! Bravo..!!
Gramps used to sit and hand sharpen his old saws tedious work but always remember they cut great
Dobrá práce 👍👍👍
Excelente perfecto
Bagus idenya
I think he is smarter than most of you give him credit. He’s not intending to use that dull old saw,he’s making a video to show the possibilities of a creative mind. Well done my friend.
I don't know..... He said first step was disassembling old chainsaw.
Wait that was step 2
Excelente idea
Amazing idea
Felicitaciones amigo agradecido por su compartimiento sin egoísmo bendiciones de ❤
Such a creative solution
Good idea 💡👍
You make it look so easy! I’m going to try this out this weekend!
Muy inteligente genial,, mis Respeto🇦🇷💖
Πιστευω οτι ειναι λειτουργικο μπραβο
Great job 👏
Mantap terimakasih 👋
Nicely done!! I would also add some thread locker on the threads and you're done. 👍😁
Ide yang sangat cerdas 😮😮
Pretty creative
Excelente !!!
Gracias por el tip.... 😅😅
Kreatif bagus sekali ide nya dari sebuah paralon menjadi gagang gergaji mantap dan hasil nya oun enak fi genggam kaya nya simple lagi.keren bang sukses sehat terus dan tetap semngat berkarya aamiin
Mantap bang, video tutorialnya jadi rekomendasi
IT HAPPENED TO MY VINTAGE SAW AND I USED 7/8 INCH PLYWOOD AND REPLACED THAT WOODEN HANDLE. MORE STRONGER AND WONT TEAR APART. THEN REPLACED THE BOLTS WITH ALUMINUM RIVETS. I KNOW THAT THE MATERIAL YOU ARE USING ARE NOT FOR TOO MUCH TIME AHEAD.
I would have never thought of that one.
Mantap ❤❤❤
The safety level is at high standards here! 🧐
Bravo Mastery )))) 😊😊😊
i have got good hand saws and i have not used any of them for over 40 years. i am not worried about fixing them.
Then don't.
good
Excellent craftsmanship....
W0w very good
Muy bien gracias
Muy bueno.‼️ José Herrera desde Acarigua Edo portuguesa Venezuela
Vou fazer uma dessa
Mantap 👍😄
Terma kasih ilmunya semangat terus karyanya 👍👍👍❤️
Wow! Amazing idea it very usefull
muy bueno
Good idea
Many many thanks
Meus parabéns belo serviço
Did you squish it flat with glass so we could see it happen? I was a bit confused by your choice there but that handle turned out good!
GASTEI MUITO LEGAL
Vc é um gênio parabéns.
Beautiful Design
Eselente mui vien el video
Ayos Ganda ng gawa
Woowwww tengo uno así, lo único malo es que no cuento con la herramienta 🤧 pero gracias por compartir tus conocimientos 👌
This is genius! I've got an old saw lying around that I’ve been meaning to fix. Gonna try this DIY trick this weekend. 🔨
Boa ideia obrigado pela dica ja vou fazer o meu só que eu não tenho essa ferramenta vou improvisar
Am I the only one who gets scary when I see no shoes on everyone there? 😕 great way to teach people on UA-cam. I do like the fix, I'm not a total asshole! Just be safe.
مجهود موفق.
bien vu bravo !
You just took the set out of your saw by grinding the sides of the cutting edge.
Lanjutkan 😅😅👍🏾
Bom trabalho!!!
Terima kasih ide kreatif buat kami pekerja kayu ya, mantap 👍👍👍
Bueno el invento,
Amigo que serviço maravilhoso . Parabéns!
Good idea , hand should be secure and firm to handle 👍
The Dutch use to make wooden shoes. Maybe you can make a pair of PVC shoes. Safety glasses are a must when using tools that spin at 16,000 RPM.
A ideia é boa, o ruim é a falta de capricho
Amazing
Muito bom,
Mantappp
Yo, pienso que a esos tornillos, antes de socar las tuercas, deberias utilizar arandelas a su medida, y tendras mejores resultados.
Wah Jan bisa di conto Kwi makasih aku yuk ngeti mksih
You could add a piece of dowel rod in the opening it would make it a bit stronger
Your mind is technical but your hands is not technical
Muito bom e muito inteligente para ficar melhor ainda é preciso usar os equipamentos de EPI.
My only suggestion would be lock washers under the nuts.
Did mine a lot quicker had a piece of oak board cut the shape I wanted and made a new handle took about 10 minutes to sand and shape.
muita ✋️ mão ✋️ de obra kkkkkk 👌 kkkkkk
Eu já vi serviço porco, mas esse passa dos limites!!!!
❤я себе сделал ручки к ручным пидам из корня старой груши. Плотная древесина, направление волокон крученое. А у мужичка, я смотрю обычная доска с прямыми волокнами. Вот ручка и раскололась.
Josafa betin mg muito bom
Parabéns bora billllllllll
It always passes me off a little when these guys are barefoot
If you want it to last use schedule 40 instead of 20.
Bien sabe deso
Educational video but too much noise in the background
How much time did you spend fabricating a homemade handle? How much is your labor worth? How much would a new saw cost at a local big box store? After all that labor, you still have a saw blade that is rusty, pitted, and dull.
👌👌👌👌👌
Bit oil on the saw blade would help a bit to keep it clean and get the rust off it
That’s gonna wobble and take you hours to cut a simple 2x4
Нормальная работа . Сделано на коленке ,а не хорошо оборудованой мастерской.
The saw could do with more meat from welding scrap steel to it then waxing the blade with a candle to make it cut easier.
Believe me it’s easier to replace it with wood 😂😂
Créeme. La madera es un árbol.😉
What’s with the hinge on the grinder?
Why did you use glass to flatten the pvc? Dangerous if the glass breaks. Of course using an electric grinder with no guards is even worse.