This video reveals an incredible trick to create super durable knife handles using PVC pipes, something 90% of people may not know. The process is simple yet effective, demonstrating how to repurpose common materials into a strong and long-lasting handle for knives. If you found this tutorial helpful, don’t forget to like the video, subscribe to the channel, and share it with your friends to spread this amazing trick!
I live in Thailand. I sharpen, restore, and make knives. This is interesting. Tomorrow, I will finish making wooden handles on two cleaver type knives. One will be mai makah (a tropical hardwood0 and the other will be white oak.
Realmente aprecio tus comentarios y tu interés en los subtítulos. Definitivamente intentaré incluir más información en mis próximos videos. ¡Gracias por su apoyo!
¡Gracias por tu tiempo! Primero utilicé pegamento normal para PVC y se secaron en 10 minutos. En segundo lugar, las palas oscilantes son mucho más seguras que las palas giratorias. Incluso si toca la hoja oscilante durante el funcionamiento y usa guantes protectores, sus dedos seguirán estando seguros
Thank you for watching and sharing your thoughts! But buying a new knife is like getting a new phone; it might be shiny, but the old one still has some good memories attached!
I can see that you had to enlarge some of the holes to get them to line up properly. I think it would be much neater if you drilled one set of holes on one PVC. You then place the second PVC😊 under the first one then use a pencil through the holes to mark the right spots. This way you get to line up the holes exactly.
Thanks for your question! I'm glad you're interested in the gloss finish. I don't actually use any paint at all. I'll share some tips in my next video! Thank you
Todo está bien menos una cosa con solo mostrar el corte del PVC y luego calentarlo para darle forma los de mas ya se sabría y por eso es largo y tedioso
Gracias por tu opinión. Entiendo que algunos pasos pueden parecer tediosos, pero quise asegurarme de que todos los detalles estuvieran claros para quienes son nuevos en esto.
I appreciate your perspective! It's true that some of the tools in the video may be difficult for the average user to use, but with the right tools, many people will do just fine.
Video far too long just to clock up watch hours good enough idea but what if you don't have all the power tools do you go out snd spend lots of dollars to buy them cheaper just buy a new knife. You could have made the same video using simple hand tools i might have watched it to the end then. In fact I might make that video myself in the future.
I appreciate your feedback! You're right that not everyone has access to power tools, and using simpler methods can make it more accessible for many viewers.
Más barato sale comprar otro que pasar tanto trabajo con esa porquería. Al parecer esta persona no hace nada en la vida y se pasa haciendo estas cosas para matar el tiempo .
This video reveals an incredible trick to create super durable knife handles using PVC pipes, something 90% of people may not know. The process is simple yet effective, demonstrating how to repurpose common materials into a strong and long-lasting handle for knives.
If you found this tutorial helpful, don’t forget to like the video, subscribe to the channel, and share it with your friends to spread this amazing trick!
Excelente...tengo todo requerido. ¡Ya voy a arreglar mis cuchillos! Muchas Gracias y Bendiciones por la enseñanza...¡Feliz Vida!❤️👏🏼👏🏼🙂✨🎶🇻🇪🕊️
Muchas gracias por tus amables palabras. Me alegra que la enseñanza haya sido útil para ti. ¡Bendiciones y mucha felicidad en tu vida!
Parabéns!!!
Tenho várias facas boas e vou usar esse método.
Brigadú!!!
Muito obrigado pelo apoio! É ótimo saber que você está empolgado para usar o método. Espero que você tenha ótimos resultados!
I was contemplating how to put a handle for my knife... And I got the answer. Thank you for your nice idea!
Thank you for your kind words! It’s always rewarding to know that my ideas can inspire others.
quedo excelente tengo uno lo intentare tambien.saludos hermano.
¡Gracias por tu comentario! Espero que te diviertas mucho intentando hacerlo. ¡Saludos!
Muy buen trabajo lo voy a poner en práctica tengo dos para hacer gracias por la enseñanza saludos desde Argentina
¡Muchas gracias por tus amables palabras! Me alegra saber que te será útil. ¡Mucha suerte con tus proyectos
Χαχαχαχα. Σιγά τη δουλειά φίλε μου μας γκάστρωσες
Muito bom adorei por isso que é bom ter ferramentas boas parabéns
Fico feliz que você gostou! Ferramentas de qualidade realmente fazem a diferença. Obrigado pelo apoio!
Wow, this sounds like a game changer! Never would have thought to use PVC for knife handles. Definitely trying this out!
So glad to hear you're excited about it! PVC is surprisingly versatile, and I can't wait to see how your knife handles turn out!
Boa dica.👏👏👍👍
Muito obrigado! Fico contente que você achou útil. Seu apoio significa muito!
Amazing
I really appreciate your kind words! It means a lot to me!
Great idea. Will definitely try this weekend with an old bushcraft knife ive been meaning to rehandle 👍
Thank you for the kind words! I'm glad you found the idea useful. Enjoy your rehandling project this weekend!
ขอบคุณความรู้❤❤
ขอบคุณมากที่ให้ความสนใจและรับชมคลิปของเรานะครับ! ดีใจที่ความรู้ที่แชร์ไปช่วยได้!
Thankyou for sharing these ideas 👍🏼👍🏼👍🏼👍🏼
I'm glad you found the ideas helpful! Sharing is what it’s all about.
Obrigado.
De nada! If there's anything else I can help with, feel free to ask!
Thanks for your feedback!
Congratulations, great video
Thank you so much! I'm glad you enjoyed the video!
I live in Thailand. I sharpen, restore, and make knives. This is interesting. Tomorrow, I will finish making wooden handles on two cleaver type knives. One will be mai makah (a tropical hardwood0 and the other will be white oak.
Thanks for sharing your passion! Always great to hear from someone who enjoys crafting as much as I do. Good luck with those wooden handles!
The craftsmanship here is impressive! The knife handle looks strong and professional
Right? If the handle were any stronger, it would start charging rent!
Sí señor buen trabajo
¡Gracias! Me alegra que te haya gustado el video.
Parabéns
Muito obrigado! Seu carinho é muito apreciado!
Fantastic !!! But tell me what you used on the handle, when it was finished, to prvide the gloss?
I'm glad you like it! To make PVC shiny, you can use a specialized polish or some wax. I will reveal it in a next video
Merhaba KKTC yaşıyorum selamlar KKTC den
Merhaba! KKTC'den selam gönderdiğin için teşekkürler! Her zaman destekleyici yorumlar görmek güzel.
muito bom
Agradeço muito pelo seu feedback! É sempre bom saber que o conteúdo ressoa com vocês!
Gostei mas como faço para o PVC ficar com esse brilho?
Estou tão feliz que você gostou! Para deixar o PVC brilhante, você pode usar um polidor especializado ou alguma cera. Vou revelar em um próximo vídeo
Very useful, Thank you for sharing this idea
I'm glad you found it useful! Sharing ideas is what it's all about.
Demasiado trabajo
¡Entiendo! A veces puede parecer abrumador, pero cada esfuerzo cuenta y vale la pena al final.
I buy old butcher knives at garage sales and estate sales and replace the handles. This is a great idea to try on them.🇺🇸🤠👍🏼
Great to see you doing similar projects. Old knives can really come back to life with a little creativity!
What did you use for the rivet material ?
I used aluminum rivets from a coat hanger. They are light and strong, pretty good for what I needed.
Amazing handle using scrap pvc pipe.. but pls skip on repetition.. boring aand it takes too much time in your video.
I appreciate your feedback! I’ll work on making my videos more concise in the future. Thanks for watching!
Aunque no hables en el vídeo podrías decir los materiales que usas cuales son, ya que el ruido no es tan necesario, tus comentarios sí etc. Gracias
Realmente aprecio tus comentarios y tu interés en los subtítulos. Definitivamente intentaré incluir más información en mis próximos videos. ¡Gracias por su apoyo!
Nice job😊
Thank you so much! Your encouragement means a lot to me!
I am Prakasam from Benton, Arkansas USA
Nice to meet you, Prakasam! Benton, Arkansas sounds like a great place.
You can also use that pvc for a holster .
Qué cola o pegamento usas, y los tiempos de secado? espectacular. Cuidado , con ese cortador te puedes rebanar un dedo.
¡Gracias por tu tiempo! Primero utilicé pegamento normal para PVC y se secaron en 10 minutos. En segundo lugar, las palas oscilantes son mucho más seguras que las palas giratorias. Incluso si toca la hoja oscilante durante el funcionamiento y usa guantes protectores, sus dedos seguirán estando seguros
Nice handle also well done on turning a 5 min vid into a 20 min one
I really appreciate your kind words! And the fact is that 20 minutes is never enough to do such a good job.
I am from India.
That's awesome!It's great to connect with viewers from all over the world
Have you ever heard of a thing called editing? Took an eternity. Good hack , though. Won't it be better to just buy a new knife?
Thank you for watching and sharing your thoughts! But buying a new knife is like getting a new phone; it might be shiny, but the old one still has some good memories attached!
It's amazing how something as simple as a PVC pipe can be transformed into a professional-looking knife handle. Great tutorial
I’m glad you enjoyed the tutorial! It’s incredible what you can create with just a little creativity and the right materials.
De Três Lagoas MS Brasil
It's great to see someone from Três Lagoas
I am 77 years aged.Interesting.
It's wonderful to hear from someone with such rich life experience! Your perspective is invaluable.
I can see that you had to enlarge some of the holes to get them to line up properly. I think it would be much neater if you drilled one set of holes on one PVC. You then place the second PVC😊 under the first one then use a pencil through the holes to mark the right spots. This way you get to line up the holes exactly.
That's a great suggestion! I appreciate the tip on marking the holes for better alignment. I'll definitely keep that in mind for future projects.
Spray with cold water to cool. And it will stay
Thanks for sharing your insight! It's always great to hear practical tips that can help everyone stay cool!
What a neat idea!! But isn't your wife mad now that the plumbing leaks? lol
Thank you for the compliment! And yes, we’re working on fixing the plumbing situation
Salut du Maroc
That's awesome!It's great to connect with viewers from all over the world
how did you get the gloss finish?
Thanks for your question! I'm glad you're interested in the gloss finish. I don't actually use any paint at all. I'll share some tips in my next video!
Thank you
Smart person.
Thank you! Intelligence comes in many forms, and I appreciate your recognition!
I actually found this interesting, but not being mean is there a 3X speed? Other than that very interesting.
Thank you for your kind words! I’m thrilled to hear you found it interesting. Your suggestion about speed is noted for future videos!
MB(MUITO BOM)
Glad you think so! Your support means a lot to me.
من تونس
مرحبًا! سعيدون جدًا بتواجدك معنا من تونس. كيف تسير الأمور هناك؟
لكن السكين المستخدم مقبضه يملك بريقا لم اشاهد هذا البريق في المقبض اللذي صنعته مالسبب يا ترى؟؟؟
شكرا لترك التعليق! ربما ستعرف في الفيديو التالي كيفية إضفاء لمعان على مقابض السكاكين
Goodjob you took a 3 minute video and made a 15 minute video you should work for the goverment
Thank you for your comment! I always try to provide as much value as I can, even if it means stretching things out a bit.
Thanks to Iran
I appreciate your comment! It's amazing how diverse our world is, and I'm glad we can discuss it together.
Why did you cut the pipes with a handsaw if you have an electrical one?
Serious question! Sometimes a handsaw can give you more control, especially since I want to emphasize that you can cut plastic pipe with any tool.
Beğeniyi hak ettin
Gerçekten çok teşekkür ederim! Bu tür yorumlar beni motive ediyor ve daha iyi içerikler üretmek için beni teşvik ediyor.
新手不熟练😂😂😂应该用尖物钉后再敲扁！😊
这是个很好的建议！用尖物钉住可以确保更好的控制，非常适合新手练习。
Please read about knife steels on the internet. Most people have zero knowledge about this subject.
You're absolutely right! Knife steels can be a fascinating topic, and there's so much to learn about their properties and uses.
Todo está bien menos una cosa con solo mostrar el corte del PVC y luego calentarlo para darle forma los de mas ya se sabría y por eso es largo y tedioso
Gracias por tu opinión. Entiendo que algunos pasos pueden parecer tediosos, pero quise asegurarme de que todos los detalles estuvieran claros para quienes son nuevos en esto.
Cut pvc with multi tool
Absolutely! Using a multi-tool for cutting PVC can make the job much easier and more efficient. Have you tried any specific techniques?
0:46😂😂😂
There are nos.of strokes per minute for cutting different materials
Thailand😅
Thanks for stopping by! Thailand is such a vibrant topic, and I'm glad you’re interested in it!
wish you wouldnt let us watch you repeat same steps for obvious things but thanks
Materal is alright. Butaverage person cannot do it from K. S. Saluja
I appreciate your perspective! It's true that some of the tools in the video may be difficult for the average user to use, but with the right tools, many people will do just fine.
Video far too long just to clock up watch hours good enough idea but what if you don't have all the power tools do you go out snd spend lots of dollars to buy them cheaper just buy a new knife. You could have made the same video using simple hand tools i might have watched it to the end then. In fact I might make that video myself in the future.
I appreciate your feedback! You're right that not everyone has access to power tools, and using simpler methods can make it more accessible for many viewers.
The repetition wears me out
Thanks for your feedback! I always try to improve my content and will adjust accordingly in the next videos.
Repeatedly waste ah time
I appreciate your feedback! Sometimes we all need a little break from the hustle, even if it feels like wasting time.
How become shining at the end ?????
So big dislike for that🙎
Thank you for sharing your thoughts! I’m always looking to improve, so I appreciate your input.
Más barato sale comprar otro que pasar tanto trabajo con esa porquería. Al parecer esta persona no hace nada en la vida y se pasa haciendo estas cosas para matar el tiempo .
Aprecio tu comentario. Es cierto que a veces puede ser frustrante, pero cada intento nos enseña algo nuevo. ¡Gracias por tu apoyo!
Não precisa mais que 5 minutos pra produzir um vídeo desse! Basta.mostrar o processo em uma peça!!!
Thanks for your feedback! I'm always trying to improve my content and your comments help me do that.
PREFIERO HACERLO CON UN MATERIAL NO SENSIBLE AL CALOR 😬
Entiendo tu preferencia, ¡es una buena estrategia para evitar problemas con el calor!