Dave, just wanna say thank u for ur content. I follow so many guys and there’s a bunch of great channels, and I retain ur information better than most. You deliver ur information and knowledge nice and steady and perfect for newer guys to understand! It’s awesome bro and I hope u know how much it’s appreciated. Please keep it coming brother! “Wash-On Wash Fam”
Cool setup, I appreciate the great info. I wish I could get bleach that cheap here in Texas. Cheapest I’ve found is $3.84 from the chemical plant for 12.5%
Amen to that I keep buying spare parts it’s getting out of hand at this point lol. The vise grip is a great idea so many times it come of came in handy
bro, this is AMAZING VIDEO! Thank you aooo much brother! Where are you in Florida? I’m I’m St Pete. I’d like to have you as my parttime Mentor and or Colleague
Hey Man, just put a piece of plywood in the inside of the trailer covering the whole gate(can even be a tarp or even another sign with out the gap for airflow.) that way it will block all the wind and your sign on the outside of the gate will never rip again.
See I was going to do that I just didn’t want to create a ton of resistance when towing the trailer and prob losing some gas mileage was my thought process. I put some slits in the new banner and has solved all issues allowing air to pass through With a board there do you think it changes gas mileage and or affects how it handles on highway when doing 70mph wind wise
I went through fin print.com. About $120 for top and bottom so not cheap and took 3 months to get so that sucked but now I got them I couldn’t be happier very well made
In order to make the hydrocele valves work for metering valve you will have to redesign the ball by putting a v-cut in the ball make sure that it Vinton seals a regular true ball valve is just a ball with a hole you'll have to rework the balls to make them metering and proportioning valves I made the same valve out of 1"hydroseal valves off of Amazon
Thank you for that info I have been playing around with it. If anything I could get away with just a metering on the soap and chlorine and leave the other one wide open water cheap ball valve no?
a place called softwash systems i believe their website is lightspeedhq.com there is also a product called agent halt that works great as well for being a bleach neutralizer
The gases venting out of your SH tank will rot that trailer out before the end of next year...you have to keep those gases contained and routed to the ground...leaving openings like with your drop sticks is gonna destroy that trailer especially once it gets warm out again next year...I see it rusting already so the process is underway unless you change it now...non venting lid..all drop tubes plumbed with bulkheads eliminating the gaps and sealing them...a fill port with ball valve and banjo fitting so you just connect to it, fill it and never have to open the lid....I use a Milwaukee transfer pump to send it from my storage tank to my SH tank on my truck using water hose and the male banjo that connects to the female banjo/ball valve installed on the tank...then at last install a ball valve and hose to vent it through the trailer routed as close as possible to the ground so the gases can escape and move away from your equipment and trailer..the ball valve on the vent allows you to only open it when you are using it and drawing from the tank and allow it to vent, and then close the valve when no longer drawing from it or else it will vent out all the time and kill anything around where you park your trailer..ask me how I know lol...SH gases are 10X more corrosive than the liquid form and once its above 85 degrees outside that SH begins to gas off...just trying to help a fellow washer...there are plenty of videos on here showing the proper way to plumb and vent SH tanks so I would tell ya to check some out and make some changes before you destroy that nice rig you got..Doug Rucker has a few on his channel along with many more..good luck and wash on
Man thanks for saving me on that one. I didn’t think it was that much of a big deal but I will def install the things you said next week to protect my trailer. Thank you very much for taking the time to explain all of that I greatly appreciate the feedback and help.
Ya I agree going to a distributor if possible is the best route I use one by my house that’s $1.49. Up north they got some crazy prices from what I hear
Big props brother. Sick set up..
Thanks bro. I updated the trailer since that vid I’m always trying to Improve it which seems to be never ending. I appreciate the support!
Dave, just wanna say thank u for ur content. I follow so many guys and there’s a bunch of great channels, and I retain ur information better than most. You deliver ur information and knowledge nice and steady and perfect for newer guys to understand! It’s awesome bro and I hope u know how much it’s appreciated. Please keep it coming brother! “Wash-On Wash Fam”
Thanks my dude I got a bunch more I’m filming and love to help where I can
Cool setup, I appreciate the great info.
I wish I could get bleach that cheap here in Texas. Cheapest I’ve found is $3.84 from the chemical plant for 12.5%
Ya it def is more expensive in different states but which is why I hope your charging more on average bc of it
Just found your channel and subbed up ⬆️
Thanks buddy greatly appreciate it. I got tons more vids I’m working on to break down everything with pressure washing
Thank you for sharing your setup with us have a good day
Any time Eric. I’m always modifying it and try to help what I learn along the way
2 is one and one is none, I have at least two of each , add a vise grip to your trailer it comes handy! Thanks for the video
Amen to that I keep buying spare parts it’s getting out of hand at this point lol.
The vise grip is a great idea so many times it come of came in handy
Great video brother keep up the good work
Thanks man I appreciate that a lot
bro, this is AMAZING VIDEO! Thank you aooo much brother!
Where are you in Florida? I’m
I’m St Pete. I’d like to have you as my parttime Mentor and or Colleague
Hey Man, just put a piece of plywood in the inside of the trailer covering the whole gate(can even be a tarp or even another sign with out the gap for airflow.) that way it will block all the wind and your sign on the outside of the gate will never rip again.
See I was going to do that I just didn’t want to create a ton of resistance when towing the trailer and prob losing some gas mileage was my thought process.
I put some slits in the new banner and has solved all issues allowing air to pass through
With a board there do you think it changes gas mileage and or affects how it handles on highway when doing 70mph wind wise
Nice😁👏
Thanks buddy!
Nice setup! Where did you get your company outfit made?
I went through fin print.com. About $120 for top and bottom so not cheap and took 3 months to get so that sucked but now I got them I couldn’t be happier very well made
In order to make the hydrocele valves work for metering valve you will have to redesign the ball by putting a v-cut in the ball make sure that it Vinton seals a regular true ball valve is just a ball with a hole you'll have to rework the balls to make them metering and proportioning valves I made the same valve out of 1"hydroseal valves off of Amazon
Thank you for that info I have been playing around with it. If anything I could get away with just a metering on the soap and chlorine and leave the other one wide open water cheap ball valve no?
What do you use to make the v- shape in the ball, can you make a video with parts list for metering the valve
I'll try to get one for you you can make a better product with a CNC you can also use a Dremel but you have to have a very steady hand
@@ga-prowashllc12.5 That you would be great I have a dremel machine
@@alist3827 ya im working on making that now, I want to make a proportioner out of pvc and stainless steel and test both.
Where do you get plant wash from??
a place called softwash systems i believe their website is lightspeedhq.com
there is also a product called agent halt that works great as well for being a bleach neutralizer
@@pressurewashingguides3178 it's only one pressure washing store in my state. Hopefully they have some. Thanks man
@@410UMAR i had mine shipped in, shipping was like $50 so i ordered like 5 - 5gallon jugs so it would last me a long time.
Are you saying pull cages or pool cages?
lol english is hard
@@pressurewashingguides3178 it was a serious question lol
What are the chances I could shadow you on jobsite for a day?
Are u in southwest florida?
🙌
Thanks I hope you enjoyed!!
The gases venting out of your SH tank will rot that trailer out before the end of next year...you have to keep those gases contained and routed to the ground...leaving openings like with your drop sticks is gonna destroy that trailer especially once it gets warm out again next year...I see it rusting already so the process is underway unless you change it now...non venting lid..all drop tubes plumbed with bulkheads eliminating the gaps and sealing them...a fill port with ball valve and banjo fitting so you just connect to it, fill it and never have to open the lid....I use a Milwaukee transfer pump to send it from my storage tank to my SH tank on my truck using water hose and the male banjo that connects to the female banjo/ball valve installed on the tank...then at last install a ball valve and hose to vent it through the trailer routed as close as possible to the ground so the gases can escape and move away from your equipment and trailer..the ball valve on the vent allows you to only open it when you are using it and drawing from the tank and allow it to vent, and then close the valve when no longer drawing from it or else it will vent out all the time and kill anything around where you park your trailer..ask me how I know lol...SH gases are 10X more corrosive than the liquid form and once its above 85 degrees outside that SH begins to gas off...just trying to help a fellow washer...there are plenty of videos on here showing the proper way to plumb and vent SH tanks so I would tell ya to check some out and make some changes before you destroy that nice rig you got..Doug Rucker has a few on his channel along with many more..good luck and wash on
Man thanks for saving me on that one. I didn’t think it was that much of a big deal but I will def install the things you said next week to protect my trailer. Thank you very much for taking the time to explain all of that I greatly appreciate the feedback and help.
Pinch a penny wants 7 for 2.5 gallons I go to a distributor in Miami for 1.25 a gallon
Ya I agree going to a distributor if possible is the best route I use one by my house that’s $1.49. Up north they got some crazy prices from what I hear