This video saved me.. had no idea what I was doing, almost took down the entire door to take the whole panel off and then I watched this. Amazing thank you so much.
You're the best, Bro! You gave very detailed instructions. It's idiots like me just happened to drop the 10mm bolt into the door panel so I was forced to open the upholstery. But the repair job on the door handle was successful because of your video. Bravo!!!
Thanks for the video. Just changed mine and wanted to thank you. Inside door handle is bit tricky to pull out but Rag trick works, just make sure rag is folded or thick enough to fit in that space. Be careful guys to not to drop screws in door cavities otherwise, you will be stuck to continue.
Good advice. Just have to be more clear a bit on the rag and the inner door handle. The small metal clip must be hooked on the rag so it’ll slide out. Tried doing lit with a rag, it was so freaking hard! Until I realized the clip should be caught by the rag on the other side so it’ll slide. 😂
Hiya, after following all the steps I just couldn’t get the external handle of our i800 off. Is it slightly different? Another bolt or did I just need some more force? TIA
Love this vid man! Can you suggest things to do on the rollers or tracks that might help make it smoother to open. I have already replaced my iMax handle before and it’s snapped off again. So clearly there is a deeper problem than just the handle.
🎉🎉🎉🎉🎉🎉🎉🎉 Thank you so much I’m no good at repairs but this video was so helpful I shit you not the local Hyundai dealer said $620 per door in Logan qld dude ur a legend!!!!!!!!
Hey Mate . I have Hyundai I load 2019 and its right hand sliding door handle broken. Will this handle work for that as well. As you mentioned year from 2007-17. Thanks a lot.
Great video thank you. Just one question the remote locking works on all doors except the drivers side sliding door, do you know how to fix this? cheers
@@thepartsfactory4239 I found out what it was, a loose part was stopping the door from closing properly which meant the electrical contacts were not touching.
Got same issue with mine, snapped clean off. I think it’s because when you open the handle on the iloads it doesn’t open the door, it feels as if my door is sealed so I’ve got to pull hard on the handle for it to unseal and then slide the door open, my brothers transit when you pull on the handle it pops the door slightly open and then you can slide it.
The hem of a cloth to take the handle off, is just genius…
Saved me a lot of time.
Thanks for posting this.
This video saved me.. had no idea what I was doing, almost took down the entire door to take the whole panel off and then I watched this. Amazing thank you so much.
Glad it helped
That cloth trick is tha bomb. Thanks a bunch from South Africa. Happy new year to you and the crew
You're the best, Bro! You gave very detailed instructions. It's idiots like me just happened to drop the 10mm bolt into the door panel so I was forced to open the upholstery. But the repair job on the door handle was successful because of your video. Bravo!!!
Glad it worked out for you 👍
The cloth trick!!!! Most amazing technique ever
Glad you think so!
Thank you from me in England. You have saved me a lot of money. The video was very easy to follow. Much appreciated.
Glad it helped
Thanks for the video. Just changed mine and wanted to thank you. Inside door handle is bit tricky to pull out but Rag trick works, just make sure rag is folded or thick enough to fit in that space. Be careful guys to not to drop screws in door cavities otherwise, you will be stuck to continue.
Hi Thanks for this video, appreciated. Do you have white instead of black. Please reply. Thanks
Hello. Buy the handle and have it painted. It's the only way. Thanks
Good advice. Just have to be more clear a bit on the rag and the inner door handle. The small metal clip must be hooked on the rag so it’ll slide out. Tried doing lit with a rag, it was so freaking hard! Until I realized the clip should be caught by the rag on the other side so it’ll slide. 😂
Hiya, after following all the steps I just couldn’t get the external handle of our i800 off. Is it slightly different? Another bolt or did I just need some more force? TIA
Love this vid man! Can you suggest things to do on the rollers or tracks that might help make it smoother to open. I have already replaced my iMax handle before and it’s snapped off again. So clearly there is a deeper problem than just the handle.
Thanks for the video. Easy job. Saved me a fortune
🎉🎉🎉🎉🎉🎉🎉🎉
Thank you so much I’m no good at repairs but this video was so helpful I shit you not the local Hyundai dealer said $620 per door in Logan qld dude ur a legend!!!!!!!!
Glad it helped you out. Crazy that its $620 though thats daylight ROBBERY
Hey Mate . I have Hyundai I load 2019 and its right hand sliding door handle broken. Will this handle work for that as well. As you mentioned year from 2007-17.
Thanks a lot.
previous owner of a Grand Starex Platinum deactivate the PSD how do you activate it again?
Good video. The rag didn't work for me so I tried a piece of 3mm thick cord/string and it worked a treat, first time.
Great video thank you. Just one question the remote locking works on all doors except the drivers side sliding door, do you know how to fix this? cheers
Door lock actuator
@@thepartsfactory4239 I found out what it was, a loose part was stopping the door from closing properly which meant the electrical contacts were not touching.
Duuuuuude, thank you sooooo much! I would never have worked that out. 🎉
No problem!
Do you have them in white?
Go to super cheap auto and use there colour matched spray cans. Thanks
The best video ever, thank you bro!
Glad you liked it!
Great video mate , Just placed order and sub scribed . Looking forward to easy fit and saving a few $$ on labour costs
Awesome, thank you!
Thank you so much bro...good job done my own..Godbless you and long life for you and your family..
No worries man! 👍
Got same issue with mine, snapped clean off. I think it’s because when you open the handle on the iloads it doesn’t open the door, it feels as if my door is sealed so I’ve got to pull hard on the handle for it to unseal and then slide the door open, my brothers transit when you pull on the handle it pops the door slightly open and then you can slide it.
Lube up the sliders and the door lock actuator.. thanks
Thanks bro am fixing mine now.❤
Thank you very much, this really help me
Glad it helped!
Thanks for the video, really helpful, much appreciated 👍
Glad it helped
0:44 "you've got 2 10 mils here".. and I can't see it... FIRE your Cameraman!!!
Just watch the video man. I show it multiple times.
Thanks for the tip mate.
No problem 👍
That was great help thank you so much
Glad it helped
Great advice. Thank you
Thanks so much bro!!!!
Happy to help
Thank you for share my friend
Thank you so much
You're most welcome
👍👍👍👍
Your website is down/broken
Yeah we've put team on it. Thanks
ขอบคุณมากครับ
Brooo you just save me 25 euro there mate. Thanks. I own Hyundai H1 starex. Anyway thanks and I'm subbing nawwww.
Thanks for the sub!
Some help but also your video does not explain it completely
😂