Just catching up with your videos and you have created an amazing library. I have 2 questions, is the accessport safe for STI and can I unplug my access-port if I'm in a sketch place and don't want to get my window smashed? Thank you for all this content Chris!
Looks great! How is the reach? Like if your buckled in and wanted to adjust something on the AP is it easily in arms reach? Also, I use a sun shade when parking outside. I know you said there was space but would that get in the way?
I can reach it just fine buckled in. My seat is much lower than the stock seat since I have a recaro sportster gt. Yes, you can easily get a sunshade between it. There’s plenty of space to slide it over.
I took some Meguiar's ultimate polish to this mount and got a dull sheen finish. Tested out on the hidden bottom half in case I didn't get good results. Came out well so I did it on the visible side.
Can the cable potential fall out of the mount when the accessport isn't connected? Also, kind of a side thing, I've noticed that you have bounced around the idea of getting a different car at times, what do you think about the Nissan Z/400z or whatever they are going to call it? I have a 2018 STI and I've been holding off on modding it too much because I'm really thinking about getting the Z when it comes out.
It could go through, but I don’t see it happening as the cable stiffness keeps it place. I’m not a Nissan guy, so not too interested in the new z. The only Nissan that gets my attention are r34’s. Besides cross shopping between an STI and a z is apples to oranges. Two very different cars.
Question, after it’s all installed is it possible for the cable to slip back into the dash? I’m thinking if it did say on accident you would basically have to go through the install process all over again to retrieve the cable. 🤷🏻♂️ Curious because I’m installing one today and was just wondering if that could happen.
A convert to the vent mounted docking station life. Welcome 🙏. I am sure you will also enjoy the better and safer view of your Accessport now plus obviously hiding that God awful wire. As for the high back on the Dialed Mounts I like it. To each there own I say boring as sh*t if we all thought the same way. Can’t disagree about 3D printing quality, but I have a cool 😎 solution which I will be posting on IG in the near future.
I use a 3D printed one and have been using it for over 2 years. I like the ability to just pop it in and the cable always plugs in. I wouldn't want this one due to the manual cable plug in. Keeping my 3D printed one for now. If they made this with a plug and play version like the 3D printed ones, I would buy it. Not for me.
@@Scoobyfreak86 no worries thank you for showing all these great products, most of my buys are from you buddy. still might buy this depends on the one you butchered haha
So so so many hours invested in this design. Thank you for all of the kind words. I was the design engineer on this project. You made my night.
You did a fantastic job! Fitment is crazy good. Nice work!
Your interior is so premium 😍
Scooby man you rock it with your videos have watched so many before and after my purchase of my subi. Love this set up looks clean
i got mine for $22 on ebay , no problems at all works perfectly fine.
Been having this mount for 2 years from SubiSpeed and had it dipped in carbon fiber. Absolutely love it!
This is a brand new mount from Mach v about a month or two ago.
@@Scoobyfreak86 Subispeed mount is what I meant lol.
Have one of the cheap 3D printed ones. Love the location of these mounts, I just leave it plugged in all the time.
Just catching up with your videos and you have created an amazing library. I have 2 questions, is the accessport safe for STI and can I unplug my access-port if I'm in a sketch place and don't want to get my window smashed? Thank you for all this content Chris!
Thanks for the support. Yes the accessport is safe. And yes it can be unplugged when parking or wanting to hide.
Looks great! How is the reach? Like if your buckled in and wanted to adjust something on the AP is it easily in arms reach? Also, I use a sun shade when parking outside. I know you said there was space but would that get in the way?
I can reach it just fine buckled in. My seat is much lower than the stock seat since I have a recaro sportster gt. Yes, you can easily get a sunshade between it. There’s plenty of space to slide it over.
@@Scoobyfreak86 awesome thanks! I was always on the fence on those mounts. Thinking I may need to pick one up!
Do you have a short shifter? Or is it just the shift knob? I just got a 2021 STI and your videos are helpful bro thank you🙏🏾
yes, kartboy ssk.
I took some Meguiar's ultimate polish to this mount and got a dull sheen finish. Tested out on the hidden bottom half in case I didn't get good results. Came out well so I did it on the visible side.
Very nice. Question though, does the Subaru STI's come with the Subaru eyesight feature.?
Not currently. Next gen will have it I believe.
@@Scoobyfreak86 ok bro
To the designer of this wonderful piece of work - will there be a version for the LHD 08-14 wrx's (particulary the hatchback)?
Yea buddy. Just finished the design @louise fontillas
@@Adamskymiller cool thanks for the update!
Can the cable potential fall out of the mount when the accessport isn't connected? Also, kind of a side thing, I've noticed that you have bounced around the idea of getting a different car at times, what do you think about the Nissan Z/400z or whatever they are going to call it? I have a 2018 STI and I've been holding off on modding it too much because I'm really thinking about getting the Z when it comes out.
It could go through, but I don’t see it happening as the cable stiffness keeps it place.
I’m not a Nissan guy, so not too interested in the new z. The only Nissan that gets my attention are r34’s. Besides cross shopping between an STI and a z is apples to oranges. Two very different cars.
i just oredered the mount thanks for making the video!
Enjoy! You’ll love it.
What’s the difference between the two options? That they offer “just the mount “ and the “mount + right - angle micro -USB cable ?
Yes the just angle
Question, after it’s all installed is it possible for the cable to slip back into the dash? I’m thinking if it did say on accident you would basically have to go through the install process all over again to retrieve the cable. 🤷🏻♂️
Curious because I’m installing one today and was just wondering if that could happen.
You’ll notice the cable will stay put. The wire is firm and it’ll stay. I don’t have any concern with it falling through.
@@Scoobyfreak86 great!!!! Good to know, thanks man
I was going to purchase it because I have a tough time finding a good spot to put the accessport but my car is a 2014 model. great mount by the way!
Just order mine. Thanks for the video
Enjoy! You’ll love it.
Is there any concern with defrost and AC blowing on the AP or wires?
No concerns
I've got the other brand 😁 and hate how the accessport sits up high almost touching the windshield.mite have to jump on this.Nice install video
I just had to pick one up after watching this again
Great choice!
Where do you bought the accessport mount from
It is in the title of the video and also explained in the video of where it is from.
A convert to the vent mounted docking station life. Welcome 🙏. I am sure you will also enjoy the better and safer view of your Accessport now plus obviously hiding that God awful wire. As for the high back on the Dialed Mounts I like it. To each there own I say boring as sh*t if we all thought the same way. Can’t disagree about 3D printing quality, but I have a cool 😎 solution which I will be posting on IG in the near future.
Hey quick question: do enkei rs05rr 18x9.5 +35 clear my 2020 sti brembos?
Yes
@@Scoobyfreak86 I don’t need spacers?
No spacers needed
Does marrying an access port void the warranty even with no tune?
No it does not since you are not flashing the ecu.
@@Scoobyfreak86 you the man
so yoy can plug in a accessport and not tune it? I thought if u plugged it in it automatically flashes the ecu
No you have to physically select the map and upload it. Plugging it in doesn’t do anything but read data.
what shift knob is that?!
ua-cam.com/video/qK1mLyiAw0k/v-deo.html
I think "V" is actually the Roman numeral "5" :)
I use a 3D printed one and have been using it for over 2 years. I like the ability to just pop it in and the cable always plugs in. I wouldn't want this one due to the manual cable plug in. Keeping my 3D printed one for now. If they made this with a plug and play version like the 3D printed ones, I would buy it. Not for me.
Don’t see the link
👍🏻👍🏻
damn I just got the mount today you butchered lol, just my luck
Sorry brother! Still does it’s job.
@@Scoobyfreak86 no worries thank you for showing all these great products, most of my buys are from you buddy.
still might buy this depends on the one you butchered haha