I just got the SB-WA340 subwoofer with its cable and with your video I managed to get it all hooked up in next to no time, thankyou! another working system saved from landfill!
Hi Raphael wish there was more people like you around to reuse a perfectly good Sub woofer and bring it back to life Awesome stuff please keep it up :)
thanks for this easy to follow guide I now have a working subwoofer and amp for my living room ceiling speakers and it sounds amazing oh and I used the cable that came with the system opened one end to fund which cables where for which pin and connected the speakers that way rather than pushing wires in the holes I find it more stable that way
All the pinouts are listed above - you just need to connect the appropriate RCA outputs from your HD amp to the appropriate pins on the system cable and bridge pins 6 and 13. To turn the amp on or off, bridge pins 4 and 19
@@sermat1000 El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
awesome... it worked... thanks for the informative video tutorial... I bought this powered 300 watts subwoofer from goodwill for 15$ and could make it work with my onkyo.
hi im just wanna say thank for the video it was really helpful and great explanation. i have a question i hope you can help me with that. it is possible to connect any switch to turn it on and of and also to increase or decrease the volume¿ thanks have a nice day or night .
Cool... thanks for the info. Someone threw one of these out with their trash by the side of the road and I scarfed it, and was looking for info about the same pin outs...
Connect the brown cable to the fuse will power on front light of SUBWOOFER ?(Mine shows NO LIGHT ON) Have SB-WA730 SUB And can i connect Ground+pin 17(sub) straight to receiver SUB RCA input? Did it and have just HUMMMMM noise, no sound. Any help ? Thanks.
Yo lo hice con el modelo SB-WA720.. lo que no me gustó y también pasa en este vídeo es que entra voz al bajo.. no sé si sea que lo estamos conectando directamente por RCA y el DVD sea el que maneje el crossover o nos falta conectar o puentear algo.. estaría genial resolver ese problema 🤔
Hi there. can you show me how do u connect the potentiometer wiring. I've connected the wire and all but the volume is very low. I really hope that you can show me how and any other stuff needed?. And are you just using normal cable, so meaning no left and right signal? just red and black cable. If i want is to have left, right and center sound, how should i do the wiring. Your video is the only one on UA-cam that shows this. Thank you so much.
The input source (ipod) has 3 wires, ground, left & right. I connected the ground to any ground of the amp (speakesrs black or #13). I split the right channel and connected it to: front right (#7), rear right (#14) and center (#15). I split the left channel and cnnected it to: front left (#11), rear left (#12) and sub in (#17). I was going to connect a double potof 50K between the ground and the channel input (left or right) in order to lower the volume. You can't increase the volume without a preamp. It was very loud with an ipod. I actually ended up buying a 5 channel car equelizer for $25 on ebay. it has 2 rca inputs (for 2 sources) and front, rear and sub outputs with seperate sub level control. I did have to buy a 12vdc power supply for $8 but it works great and it is loud!good luck.
+Raphael Gluzman - Hello again. The way you said it sound interesting and fun to do. Do you have a video of it now or maybe pictures? It would be great if you can make one more video on how it is now. My electronic know-how is not that good.haha... just a beginner level.
I have the same subwoofer (powered subwoofer only), could you help me & explain how I could connect it to a stereo receiver? Thanks & Thanks for posting this video
Great video! Please could you confirm if the 25 pin cable “pin-out” is just straight? Or maybe crossover? I lost it so I want to build a new one but need to confirm if PIN 1 is also PIN1 in the other end. Thanks in advance!
I know this is a really old video, but is there anyway you can tell me if it's possible to take the red and white rca cables, the right and left audio respectively, and use these to connect to tv? If so, how should I go about doing the center, sub, ground, and power connections? Thank you for your time.
I'm not 100% sure but I believe it wold be the same. You still have a line and a neutral supply to the power supply, just a 220v primary on the transformer. Good luck and don't hurt yourself.
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
hello. dear author, I do not know English, and therefore I did not understand how to connect a subwoofer without a dvd. please explain in more detail once again. thank you very much
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
I just got the SB-WA340 subwoofer with its cable and with your video I managed to get it all hooked up in next to no time, thankyou! another working system saved from landfill!
Wow! It really is amazing the hints on something so obscure that I can find about a sub posted eight years ago!
6 years later and still helping people! Thanks guy
I'm about to hook mine up and saw your video. Excellent. Very informative video and well explained. Great delivery. I appreciate it!
Hi Raphael wish there was more people like you around to reuse a perfectly good Sub woofer and bring it back to life Awesome stuff please keep it up :)
thanks for this easy to follow guide I now have a working subwoofer and amp for my living room ceiling speakers and it sounds amazing oh and I used the cable that came with the system opened one end to fund which cables where for which pin and connected the speakers that way rather than pushing wires in the holes I find it more stable that way
BUENAS TARDES PODRIA EXPLICARMELO MAS DETALLADAMENTE EN ESPAÑOL GRACIAS
Gracias !!! desde Bolivia me sirvió de mucho el video, ahora puedo escuchar músicaaaaa
Buenas tardes yo acabo de comprar el subwoofer el mismo modelo como lo adaptaste o modificaste su salida por favor espero su respuesta
All the pinouts are listed above - you just need to connect the appropriate RCA outputs from your HD amp to the appropriate pins on the system cable and bridge pins 6 and 13. To turn the amp on or off, bridge pins 4 and 19
BUENAS TARDES PODRIA EXPICARMELO MEJOR EN ESPAÑOL.GRACIAS
@@sermat1000 El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
Thank you, I bought a Bluetooth to RCA connector, works great. Thanks again
Hola como isistes la coneccion para que funcione con el bluetoo
Yo también estoy interesado en saber se lo agradecería
@@Lucas-wc3sw gay un aparato que venden en Amazon, RCA to Bluetooth
awesome... it worked... thanks for the informative video tutorial... I bought this powered 300 watts subwoofer from goodwill for 15$ and could make it work with my onkyo.
thanks very much for posting this - it saved the unit being thrown out
hi im just wanna say thank for the video it was really helpful and great explanation. i have a question i hope you can help me with that. it is possible to connect any switch to turn it on and of and also to increase or decrease the volume¿ thanks have a nice day or night .
AMIGO BUENAS TARDES PODRIAS EXPLICARME DETALLADAMENTE COMO LO HICISTE POR FAVOR EN ESPAÑOL -GRACIAS
This is exactly what I needed, thank you
this is exactly what I needed. Great video, thank you so much!!
Hola como.lo hiciste
Cool... thanks for the info. Someone threw one of these out with their trash by the side of the road and I scarfed it, and was looking for info about the same pin outs...
Connect the brown cable to the fuse will power on front light of SUBWOOFER ?(Mine shows NO LIGHT ON) Have SB-WA730 SUB
And can i connect Ground+pin 17(sub) straight to receiver SUB RCA input? Did it and have just HUMMMMM noise, no sound.
Any help ?
Thanks.
The light should be on if the sub is plugged in, it has nothing to with weather the sub is turned on
awesome video tech guy ;) very helpful
thanks so much! i finally got my surround sound set to work :)
Hoy 01/17/2023 relise el proceso y quedo funcionando super bien, recupere mi teatro en casa..gracias
Yo lo hice con el modelo SB-WA720.. lo que no me gustó y también pasa en este vídeo es que entra voz al bajo.. no sé si sea que lo estamos conectando directamente por RCA y el DVD sea el que maneje el crossover o nos falta conectar o puentear algo.. estaría genial resolver ese problema 🤔
Hola es necesario el dvd o se puede aser solo con el bufer
@@jacofebrero Solo con el bufer, este metodo es para cuando ya no funciona el DVD.
i have the same problem but thanks allot to show us how to use this.
hey just to let you know this video is very helpful it worked
Just a bit, the important screws for electronics removal.......on the bottom!
Hello. please tell me how to activate the relay on the power board
Hey man, whats the voltage between the fuse and the brown wire going to the transformer. I want to make sure my switch wont melt, thanks 😂😂
It's been so long. I think it was like voltage. 120vac
Brasil Agradece
Aqui não Tem Técnico ensinando a fazer essas ligações consegui fazer no meu muito
Hola como ases
Thanks a lot. I will be trying this.
Excellent video!
Hi there. can you show me how do u connect the potentiometer wiring. I've connected the wire and all but the volume is very low. I really hope that you can show me how and any other stuff needed?. And are you just using normal cable, so meaning no left and right signal? just red and black cable. If i want is to have left, right and center sound, how should i do the wiring. Your video is the only one on UA-cam that shows this. Thank you so much.
The input source (ipod) has 3 wires, ground, left & right. I connected the ground to any ground of the amp (speakesrs black or #13). I split the right channel and connected it to: front right (#7), rear right (#14) and center (#15). I split the left channel and cnnected it to: front left (#11), rear left (#12) and sub in (#17). I was going to connect a double potof 50K between the ground and the channel input (left or right) in order to lower the volume. You can't increase the volume without a preamp. It was very loud with an ipod. I actually ended up buying a 5 channel car equelizer for $25 on ebay. it has 2 rca inputs (for 2 sources) and front, rear and sub outputs with seperate sub level control. I did have to buy a 12vdc power supply for $8 but it works great and it is loud!good luck.
+Raphael Gluzman - Hello again. The way you said it sound interesting and fun to do. Do you have a video of it now or maybe pictures? It would be great if you can make one more video on how it is now. My electronic know-how is not that good.haha... just a beginner level.
please tell me how could i connect my panasonic sb-wa326 activ sub wooffer with my pc pleas i need your help
Interessante, eu achei na rua um desse porém o modelo 510, não sei se é a mesma os menos pinos, mas irei testar! Obrigado
Making the jumper of the fuse turns on the fan and so we realize that it is already activated
Thanx for showing this!
My friend, I want to cook with more detail when it's time to call. Thank you.
I have the same subwoofer (powered subwoofer only), could you help me & explain how I could connect it to a stereo receiver? Thanks & Thanks for posting this video
What parameters does the fan have? Is it 12V? What are the dimensions of the fan?
Thanks, worked perfectly....
Thanks , This help me a lot
Great video! Please could you confirm if the 25 pin cable “pin-out” is just straight? Or maybe crossover? I lost it so I want to build a new one but need to confirm if PIN 1 is also PIN1 in the other end. Thanks in advance!
Hi I also bought this by mistake from someone in Australia. Now the connecting cable is not compatible with my tv. What to do ?
So you jumped the brown ground wire to the output of the fuse?? But how
heloo ,,I don't have a palette, and I want to take it to the aux. I drink the same dots but it doesn't come out, you have no other video?
Al hacer el jumper no se enciende el ventilador
thanks, i brokend the main unit and so use onli pwer amplifer...
Don't you have orginal black connector ???
Having problems with mine and need to take that housing unit out. Cant seem to get it out
Very thanks for you.
Hello, good afternoon, can you give me the order in which you tell the pins
I know this is a really old video, but is there anyway you can tell me if it's possible to take the red and white rca cables, the right and left audio respectively, and use these to connect to tv? If so, how should I go about doing the center, sub, ground, and power connections? Thank you for your time.
It's even older now I need it 😂
hi , I am from viña del mar,chile. and i want to ask you from power supply, how do you do this connections ? , in my country we use power 240 volt.,
I'm not 100% sure but I believe it wold be the same. You still have a line and a neutral supply to the power supply, just a 220v primary on the transformer. Good luck and don't hurt yourself.
hi i have SB-WA350 when i connect the brown and the fuse power its sparks. every time i do it it always sparks. any help thanks
Thank you!!
El videos es genial
I have this sub hooked up to my ps4 and it sounds amazing! Also have an aux cord for it so i cnn play music from my phone
How did U do it dude...help me out
Como ases amigo
Como hago para activar este 4:29 4:29
COuld you please tell me what the other white wire going from iPod into the case/amp is? Thank you.
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
hello. dear author, I do not know English, and therefore I did not understand how to connect a subwoofer without a dvd. please explain in more detail once again. thank you very much
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
ALGUEM PODERIA LEGENDAR EM PORTUGUÊS?
Someone, maybe the owner of the channel, could subtitle in Portuguese? Thanks!
Eu entendi o básico, se quiser pode me chamar.
Do you have the serial number of the model number of sbwa330
No I dont
i have similar model, i need help making mine work with my mobile mp3 player. Mine has two fuse, and mine shows green light constantly at the front.
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
Hi I also bought this by mistake from someone in Australia. Now the connecting cable is not compatible with my tv. What to do
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
@@wilsonsalazarm4056va a sonar el sistema o otro sistema?
You can make a diagram and explain how to connect How turn
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
How did u just slide it out like that?
I dont know if you=ll find it relevant now but the are screws holding it at the base, outside of the box
How did u connected thę aux?
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
I could connect it what I can't is to go up and down volume
any insight on how to splice system cable to an RCA cable(only for subwoofer) coming from amp?? or if it would even work.
just put it in pin 17 and 18
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
I have a a woofer model number s b w a 330
Tried your suggested by pass. Doesn’t work
How did you wire the aux cable ?
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
@@wilsonsalazarm4056 como se pide ese cable auxiliar?
@@lopezcastanedamichellherna7330 CABLE RCA 2 X 2, viene con los terminales color blanco y rojo como el de los DVD
Do you know the impedance of the driver inside?
No I don't
Raphael Gluzman Thats okay :)
+Raphael Gluzman how do I connect the brown cable to the fuse
+Raphael Gluzman how do I connect the brown cable to the fuse
CameraKid2 yes it is 6ohm becouse the amplifure runs at 6ohm
I need model number sbw A330
Wish I know how to do this too
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
agan uno en español
no necesitas en español, esta facil entenderle
I have a Dump sir
turn your camera
I have the same subwoofer like you but still can’t connect
Can some one please help me
I would pay for this !
🥺
L pin = 7
R pin = 6
GND pin =?
Subwoofer pin = 17
yes? (sorry i not speak english)
please help
suena ese subwoofer o otro sonido?
Я все подключил кому нужно пишите ❤️
Мне нужно! По тарабарски не разумею)). Зачем он красным проводом с крокодильчиками предохранитель с чем то там ( тоже пока не понял) замкнул?
please
El cable RCA se conecta en polo a tierra al chasis del amplificador y el otro cable a los pines enumerados en el video. y se realiza puente con un cable del fusible al cable marron o cafe de la fuente de poder.....
man can you tell me a thing >
Ok
+Raphael Gluzman how can we adjust tge volume ?
Add a 50k pot between the input pin and the input signal
can't we just get out red and white audio wire out if it
@@raphaelgluzman4933
Please I need a website address for connector