So the amperage draw I noted is what indicated it was a "vdd_main" short, so I manually decided to click on that line on the software. There are many many other lines to look at as well, but I knew from experience it was likely this one that was the problem. The software is called "zxw tools"
Sir, Thank you so much for sharing useful information for everybody! You're amazing! I have a quick question. May I ask how much voltages you injected to the probes after you froze the board?
The Apple phones are metal covered and the phone has speaker holes. By placing the phone to a radioactive heavy power bank for 3 days, the phone’s charging discharging can be fixed, the min of the battery life will be better. Placing by facing the holes toward the power bank, the holes let in the radioactive ray to the battery’s panel. The Chinese and Japanese power banks have nuclear radiation to do the fix. Phones without metal cover, you have to put the phone on the power bank facing the batt down. If the pwr bank is smaller than the phone, you have to guess where you put the pwr bank, but near the battery. Each correct fix takes 3 days. When the battery’s own panel is very hot, you fixed the phone, the phone will become cool, the battery’s little chip will become hot instead. The connections must be clean. Best experiment with old Nokia phones, what’s the middle connection is really for.
Damn that is really cool brother keep up the good work
I appreciate that 😁
We need detailed tutorials for dead mobile repairs please
did you replace or just remove the cap?
Whats the software you use to look at board an how did you get one that showed the likely short area
So the amperage draw I noted is what indicated it was a "vdd_main" short, so I manually decided to click on that line on the software. There are many many other lines to look at as well, but I knew from experience it was likely this one that was the problem. The software is called "zxw tools"
Sir, Thank you so much for sharing useful information for everybody! You're amazing! I have a quick question. May I ask how much voltages you injected to the probes after you froze the board?
You should inject whatever the line is rated for. If it is a 3v line, inject no more then 3v. Or 1v, if it is a 1v line.
@@iBoardRepair Thank you so much sir!
Thank u so much sir
No problem!
The Apple phones are metal covered and the phone has speaker holes. By placing the phone to a radioactive heavy power bank for 3 days, the phone’s charging discharging can be fixed, the min of the battery life will be better. Placing by facing the holes toward the power bank, the holes let in the radioactive ray to the battery’s panel. The Chinese and Japanese power banks have nuclear radiation to do the fix. Phones without metal cover, you have to put the phone on the power bank facing the batt down. If the pwr bank is smaller than the phone, you have to guess where you put the pwr bank, but near the battery. Each correct fix takes 3 days. When the battery’s own panel is very hot, you fixed the phone, the phone will become cool, the battery’s little chip will become hot instead. The connections must be clean. Best experiment with old Nokia phones, what’s the middle connection is really for.
How much does that cost
cool work,keep doing!❤
Thanks!
Voltage
injected …
Amount of the voltage ?
4v for vdd_main
For vdd_boost
I have an iPod five generation it doesn’t turn on all way it just is stuck on the apple logo it doesn’t turn on completely what do you think could be?
I would try to do an update to it first
Where you buy the short finder ?
This is a multimeter that can be found anywhere
What kind of spray you put on the board? What is the name of it?
Freez spray
You can get freeze spray
can u say me the name of software you using?
zxw tools
How many volts and amps do you inject?
480V, 20A 3Phase, there or about.
@@Matt-Holdren nigga what
Weldon boss, I really want to learn from you, what is the process for registration...
Sorry, I don't teach
bro the Internet is full of information to learn this kind of fault finding only one Google search away
No need to replace the capacitor ?
Yes, there's no need to replace the capacitor because you want your device to not operate without a replacement.
Genius! Love the content🫡
Thanks!
Do you have a link for the freeze spray you use please?
I don't have any specific one I use, just google any one.
You can ger it from people sell phones accessories