Langmuir Systems CrossFire Review And THC upgrade
Вставка
- Опубліковано 7 жов 2024
- HIT THAT LIKE BUTTON, SUBSCRIBE, SHARE & COMMENT!!
Hey guys! Today we are reviewing the Langmuir Systems CrossFire and installing the THC kit. As always, don't forget to like comment, and subscribe!
CHECK OUT MY NEW STORE!! blowingdiesel....
Share with me your purchases for a shout out on Instagram!
Check out superclean.com for some good degreasers
Check out www.archoil.com and use the discount code BD10 to get 10% off
Auxbeam Led bulb: amzn.to/3qN27sq
LASFIT LED bulbs(discount code 928obs&lasfit) : lddy.no/e5km
Send me an Email: BlowingDiesel@gmail.com
Send me a DM: @BlowingDiesel_Merch or @_BlowingDiesel_
Mailing Address:
PO Box 788
Chino Valley, AZ 86323
Neiko 1/2" Impact Socket Set: amzn.to/3kQ8bNK
DEWALT 20V MAX XR 1/2 Cordless Impact: amzn.to/3ehWDjT
HOW TO USE MY BUMPER BRACKETS TO INSTALL A 2017 ALUMADUTY BUMPER ON A 7.3 POWERSTROKE
• HOW TO USE MY BUMPER B...
CHECK OUT THIS HEADLIGHT BULBS! - lddy.no/e5km
10% discount codo 928obs&lasfit
-------------------------------------------------------------------------------------------------------------
Click below for the 05+ axle swap!
www.youtube.co....
Click below for the stage 1 build!
www.youtube.co....
INSTAGRAM www.instagram....
EMAIL BlowingDiesel@gmail.com
-OBS PARTS-
LED BULBS - lddy.no/dfue
6637 Filter - amzn.to/2UtPcuB
aFe Turbo-Back Exhaust System - amzn.to/2TuDbFr
TS Performance 6 Position Chip - amzn.to/2Wyh3fd
GlowShift Diesel Gauge Package - amzn.to/2MIW0C1
BAFX OBDII Reader/Scanner - amzn.to/2GbWm2R
Archoil Performance Kit P-1 - amzn.to/2SjAYz0
Motorcraft BT-50 Belt Tensioner - amzn.to/2Tk9BCh
F8TZ8620FB Belt - amzn.to/2Tks3L0
Crystal Headlights - amzn.to/3a24RtC
Euro Black Bumper Parking Lights - amzn.to/2tMvz96
-TOOLS I USE-
Topside Creeper - amzn.to/2BdAiBH
Lincoln Electric POWER MIG 210 MP Welder - amzn.to/2Wzbyg0
Craftsman 230-Piece Mechanics Tool Set - amzn.to/2B8WXif
Combination Wobble Extension Bar Set - amzn.to/2Wv9vtr
Universal Joint Set - amzn.to/2D15ggg
3/8" Dr. 6 Pt. Metric Universal Socket Set - amzn.to/2Tp9CoC
-CAMERA GEAR I USE-
GoPro HERO7 Black - amzn.to/2TnHSRe
GoPro Tripod - amzn.to/2Wswbux
Bigger Tripod - amzn.to/2D2P3XU
-LINKS ABOVE ARE AMAZON ASSOCIATE LINKS-
MUSIC:
Song: Vendredi - Landscape Lover [Copyright FREE Music]
Available on UA-cam promoted by "Copyright FREE Music":
• Vendredi - Landscape L...
---------------------------------------------------------------------------------------
DISCLAIMER:
Due to factors out of the control of 928OBS/Blowing Diesel, we cannot guarantee against improper use or unauthorized modifications of this information. 928OBS/Blowing Diesel assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. 928OBS/Blowing Diesel recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not 928OBS/ Blowing Diesel. Be safe!
This video and description contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission.HIT THAT LIKE BUTTON, SUBSCRIBE, SHARE & COMMENT!!
How did you like keeping your plasma torch below the cutting bed? Seems like a nice way to keep the cables clean by keeping the torch down below. I am setting up a mobile setup and having cable organization issues!
I see you're rocking the Everlast! Nice! I switched to the 82i and it's been great!
Thank you
Thumbs up 👍 on ur garage upgrades!!
What did you use to extend the cables? Imthe motors look just like VGA cables. What about the THC and other cables?
I think I have the exact same setup but I'm having trouble wiring up the thc upgrade can you is there anyway u can help me with that....I have it all hooked on the table and wired up but don't know how to wire my cutter to the table
Just purchased the same
Setup, wondering if you had gotten your torch firing issues figured. Any tips?
How's the table going? Are you still running it or did you upgrade? I am getting ready to install my Z axis upgrade in the next few weeks.
I’m very happy with it, it worked great for the 2 years that I used it pretty much trouble free! But just this week I upgraded to the Pro and it’s even better!
@@blowingdiesel im torn between the 2x2 or the pro. I know you said you wish you got the pro, but do you find it sucks up a lot of shop space? do you really need the bigger envelope? do you still prefer the pro since getting it?
Thank you for doing this video, I have the same gen 1 table with the XL addition and was also interested in the thc, other than the connection issues you have does it do a good job on the warped material you cut?
Thank you, stay safe
It makes a huge difference I can now cut on my whole table with out worries
@@blowingdiesel did you get the connection problem figured out out is it still hit and miss?
Thanks for the video. I am torn between the THC upgrade for my og crossfire xl or purchasing the crossfire pro. I believe being able to fit full sheets would be a lifesaver to me. I also have an identical in looks and hp kobalt air compressor that says it’s 11 cfm @ 90psi and 11.5 @ 40psi? Anyways keep up the great content!
100% go with the pro not having done that from the get go is one of my biggest regrets and I will probably be buying it or the new xr or whatever they are calling the new full 4x8 table. Is yours a single stage? Maybe that’s why you have the higher cfm?
No it’s a two stage also!
3.7 hp 175 psi?
@@blowingdiesel yes
That’s wired I wander what’s the difference
You dont run mach 3 ?
is this the gen1 or gen 2 THC KIT
So the gen 1 and gen 2 refers to the actual table not the THC the gen 2 will already run Firecontrol gen 1 used Mach3 if you are on their website get the one that goes to your table if you have the gen 1 that uses Mach 3 get that option it’s what I got if you gave a gen 2 get that. Hope that helps
@@blowingdiesel got it thanks
👍
Thanks brother!