Hello Robret, Greetings from Ecuador I congratulate you for your videos are very clear and technical, I like to do my own projects, my question is that if this cnc can perform high relief work or everything depends on the software and drivers used, I would also like to know if I can use a Mega Arduino to control the elements. Apologies for my English, I'm using a translator
In the start of the video, you have an aluminum piece in your right hand, could you tell me what's the name please? I need to know and I can't find it on the Internet.
It seems to me the weakest point in this build is the gantry. The height/ weight mounted to a fairly small spread on the rail ( less than 6") lends itself to more deviations on heavy cuts and fast moves. There is a lot of weight and a fairly high center of gravity amplifying everything. This is why you see most upright gantry plates designed with a longer plate where the bearings ride the rails at around 10" spread or more and a gantry height only as tall as needed (most around 7" bit clearance.) Please let us know how things are working with this build and what kind of tolerances you get in different materials. Thanks for the videos.
Haven't had any probl;ems because of the gantry. I don't use the machine every day or sometimes every week so I really don't run it through its paces as they would say. As far as tolerences, that all depends on how well it's calibrated but for what I use it for occassionally, it does okay.
Part 01: ua-cam.com/video/ik19dH5ZWQ0/v-deo.html Part 02: ua-cam.com/video/y-_aA2lJ0c0/v-deo.html ► Part 03: ua-cam.com/video/NKv3I7Zclhk/v-deo.html Part 04: ua-cam.com/video/OY8pq23vXco/v-deo.html Part 05: ua-cam.com/video/66r5X9Q0Xuw/v-deo.html Part 06: ua-cam.com/video/-Yi8X9SALSQ/v-deo.html Part 07: ua-cam.com/video/gdz4OXo9x38/v-deo.html (Electronics) Part 08: ua-cam.com/video/ahIdSt6U17o/v-deo.html (Testing & installing motors) Part 09: ua-cam.com/video/vI-J74K31Zg/v-deo.html (Completion) Part 10: ua-cam.com/video/aMByQvUo3CQ/v-deo.html (Wiring diagram) Part 11: ua-cam.com/video/wjCZnUu23g8/v-deo.html (Wiring diagram update - addded auto zero wiring and scripts)
How many milimiters are the aluminum pieces and the diameter of the Housing ball screw? I want to do one of 1000mmX700mm and have no idea how to size this parameters...
Nice Build!!! Where did you buy the universal plate for the z-axis? Did you buy the gantry riser plates pre-made, or di you have to cut and drill those out by hand? I too am using Linear rods kit, only thing I’m worried about is that the rods will have play in them, but I’m confident it should work for what I’m doing (guitar bodies). MAN! This thing looks super solid! P.S. What size motors are you using? Do they handle the weight okay? I’m going with 3 x High torque NEMA 23, 200 step stepper motors… I bought some controllers that support step muliplication, so I’m hoping it will work good enough for what I’m doing here. Any advice on plate parts will be greatly appreciated, sir. Thank you!
All parts came pre cut and drilled as part of a complete kit. (Which is no longer available) Motors are nema 23 , 425 oz. in. They handle the job just fine.
I've watched you build this, and so far, you have been smart, clever and well-purposed to the end of putting this kit together. With one glaring exception. Not one drop of Loctite. Not Temporary Blue, not Permanent Red. Is this an oversight, or by design ?
MAAAAN OH MAANNN i wish i could buy one or atleast make it lol, but im in the navy too poor lol. do you have aparts build list or do you think one could be made on a budget?
It's about 30" x 48" working area. The linear rails are like these in this link but not the same ones: www.amazon.com/Included-Bearings-Automated-Machines-Equipments/dp/B09MMYTVZM/ref=sr_1_1_sspa?crid=3ETG4DHA6HB9O&keywords=linear+rails&qid=1677724002&sprefix=linear+rails%2Caps%2C83&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.304cacc1-b508-45fb-a37f-a2c47c48c32f&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWjlUTFVGUkc2TDQyJmVuY3J5cHRlZElkPUEwMzMxOTgxM1NJRDY3WUFLWlpFQSZlbmNyeXB0ZWRBZElkPUEwMzE3NjkwMjMwRllBVlNZUEhTNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
+MyRobertadams I have to ask: did you machine those side plates yourself or did you order them? Where I live those would probably run in the hundreds of dollars each....just for the machining.....and easily $150 for the plate itself.... Just did a rough price: steel plate would be half as thick and 1/6th the price.....sure, it'd be 6 lbs heavier but.....
I am really super impressed with this build. U seem like the regular old granddad, but u have some great engineering skills!
Excellent job. All I need now is a reason to build one. Ha.
Thanks for sharing.
Es usted todo un maestro. Muchas gracias por este y los otros videos, me han sido de gran utilidad por su sencillez y muy buena documentacion. Gracias
A serious machine!
Nice work...
Something you might want to do is pin your rails once you know you have it all adjusted where you want it.
The center of those shafts are not hard. The rods are case hardened.
Excellent
I envy you the Al profiles! For us in SK would have to buy 250 kg of any kind! Ouch.
Miroslav.
IT IS HELP FULL
I'm glad, thank you!
Thanks...you done a great job,would you like to tell me about X-Axis plate size(L x W),Y-Axis Plate size (L x W)
Hello Robret, Greetings from Ecuador I congratulate you for your videos are very clear and technical, I like to do my own projects, my question is that if this cnc can perform high relief work or everything depends on the software and drivers used, I would also like to know if I can use a Mega Arduino to control the elements. Apologies for my English, I'm using a translator
Good work. :) what is thichness of linear rails and ballscrews
Hello,
Could you plz tell me the diameter and length of the worm that you used?
Thank you
In the start of the video, you have an aluminum piece in your right hand, could you tell me what's the name please? I need to know and I can't find it on the Internet.
It seems to me the weakest point in this build is the gantry. The height/ weight mounted to a fairly small spread on the rail ( less than 6") lends itself to more deviations on heavy cuts and fast moves. There is a lot of weight and a fairly high center of gravity amplifying everything. This is why you see most upright gantry plates designed with a longer plate where the bearings ride the rails at around 10" spread or more and a gantry height only as tall as needed (most around 7" bit clearance.) Please let us know how things are working with this build and what kind of tolerances you get in different materials. Thanks for the videos.
Haven't had any probl;ems because of the gantry. I don't use the machine every day or sometimes every week so I really don't run it through its paces as they would say. As far as tolerences, that all depends on how well it's calibrated but for what I use it for occassionally, it does okay.
hi this is a great job watched all 9 clips thanks for sharing,and i do have a request.please can you tell me where that i could buy the full set,,
if use linear rail 16mm rigid enough ?
Where did you get those aluminium profiles from? 60x60mm with 2 rabbets?
its difficult to find structure for sbr25s
Verry nice build 👍👍👍 verry strong it give me some idea to build mine
Thank you! Best of luck!
@@MyRobertadams is this cnc kit is still available ?
@@lepretrelucas2309
No it’s not. Their website no longer exists.
@@MyRobertadams thank you verry much can you says me the référence of the linear slide and aluminium profile please ?
I think it is sur 20mm ?
@@lepretrelucas2309
Linear rails are 20mm and aluminum extrusion profiles are 60 x 60mm.
Nice table router kit about the right size. where did u get it, I wont one.
Part 01: ua-cam.com/video/ik19dH5ZWQ0/v-deo.html
Part 02: ua-cam.com/video/y-_aA2lJ0c0/v-deo.html
► Part 03: ua-cam.com/video/NKv3I7Zclhk/v-deo.html
Part 04: ua-cam.com/video/OY8pq23vXco/v-deo.html
Part 05: ua-cam.com/video/66r5X9Q0Xuw/v-deo.html
Part 06: ua-cam.com/video/-Yi8X9SALSQ/v-deo.html
Part 07: ua-cam.com/video/gdz4OXo9x38/v-deo.html (Electronics)
Part 08: ua-cam.com/video/ahIdSt6U17o/v-deo.html (Testing & installing motors)
Part 09: ua-cam.com/video/vI-J74K31Zg/v-deo.html (Completion)
Part 10: ua-cam.com/video/aMByQvUo3CQ/v-deo.html (Wiring diagram)
Part 11: ua-cam.com/video/wjCZnUu23g8/v-deo.html (Wiring diagram update - addded auto zero wiring and scripts)
Looks grate
how thick are the side plates?
sir, what is the size of side sigma profiles?
dear sir super job . im from sri lanka . can you help me , where i can bye thesis material? ball screw,
very nice!! I want the maps and sizes. Can anyone help me? please!
do have the drawings for the holes ball screw nut housing
Nice
nice engine .can you send me the software to learn. .i very keen to make it. Thank you
How many milimiters are the aluminum pieces and the diameter of the Housing ball screw? I want to do one of 1000mmX700mm and have no idea how to size this parameters...
Thank you so much for your answer, for sure It will be helpful for me!!!
Hi... excellent work
I'm wondering how much does it cost?
MyRobertadams thank you a lot sir
It really excites watching all 12 screws in the same piece tightened. Some people don't seem to learn video editing.
cnc lux
Nice Build!!! Where did you buy the universal plate for the z-axis? Did you buy the gantry riser plates pre-made, or di you have to cut and drill those out by hand? I too am using Linear rods kit, only thing I’m worried about is that the rods will have play in them, but I’m confident it should work for what I’m doing (guitar bodies). MAN! This thing looks super solid!
P.S. What size motors are you using? Do they handle the weight okay? I’m going with 3 x High torque NEMA 23, 200 step stepper motors… I bought some controllers that support step muliplication, so I’m hoping it will work good enough for what I’m doing here.
Any advice on plate parts will be greatly appreciated, sir. Thank you!
All parts came pre cut and drilled as part of a complete kit. (Which is no longer available) Motors are nema 23 , 425 oz. in. They handle the job just fine.
mantab
thank you for shring sir
pls help me how i can calculate velocity and acceleration in mach3
thank you very much sir
Have you use bearing sbr20 thanks
Nice build but.....2x?
what is, you use the motherboard and stepper motor controllers, control software?
Thanks Sir.
I've watched you build this, and so far, you have been smart, clever and well-purposed to the end of putting this kit together.
With one glaring exception.
Not one drop of Loctite. Not Temporary Blue, not Permanent Red. Is this an oversight, or by design ?
Very Nice how much did you tear out of your pocket for it?
MAAAAN OH MAANNN i wish i could buy one or atleast make it lol, but im in the navy too poor lol. do you have aparts build list or do you think one could be made on a budget?
Whot size of profiles do u used to this machine ?
What size sbr did you use for the X and Y axis
I'm not good at abbreviations, what is sbr?
@@MyRobertadamssorry. I was asking what diameter your linear rail are for the X and Y axis
Thanks
bryan gorski
They are 20mm.
2' 42" golpear esa pieza tan hermosa, el sueño de cualquiera que quiere armar su propio CNC, es un pecado!!!
hi sir. I wonder what 's the working size of this machine and which is the type of the linear slide rail you using ?
Thank you.
It's about 30" x 48" working area. The linear rails are like these in this link but not the same ones: www.amazon.com/Included-Bearings-Automated-Machines-Equipments/dp/B09MMYTVZM/ref=sr_1_1_sspa?crid=3ETG4DHA6HB9O&keywords=linear+rails&qid=1677724002&sprefix=linear+rails%2Caps%2C83&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.304cacc1-b508-45fb-a37f-a2c47c48c32f&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWjlUTFVGUkc2TDQyJmVuY3J5cHRlZElkPUEwMzMxOTgxM1NJRDY3WUFLWlpFQSZlbmNyeXB0ZWRBZElkPUEwMzE3NjkwMjMwRllBVlNZUEhTNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
@@MyRobertadams thank you so much.
Sorry for the question, but could you tell me the thickness of the aluminium plates that you are using ? Thanks.
Thanks for your support.
how thick are the z axis plates?
+MyRobertadams I have to ask: did you machine those side plates yourself or did you order them?
Where I live those would probably run in the hundreds of dollars each....just for the machining.....and easily $150 for the plate itself....
Just did a rough price: steel plate would be half as thick and 1/6th the price.....sure, it'd be 6 lbs heavier but.....
***** ah this was a kit? I did not know that....
Friend, whats the precision of your CNC machine ?
Thks
I have one machine with Z axis very larger than XY. I'll use it to mill a cast in wood for glass fiber helicopter blades.
ｎｉｃｅ＾＾＾￥・￥
এটার প্রাইস কত টাকা হবে প্লিজ কমেন্টে জানাবেন
so eine umlauf spindel?
What is the price of a CNC ike this?
MyRobertadams thank,s very mach.
비달...
Que bom que gostou do canal sobre Solidworks.
Este vídeo mostra um pouco mais sobre o que você pediu.
Valeu.
ua-cam.com/video/k6OvCqHC2yA/v-deo.html
Excellent
Thank you!