Simple answer to the balance issue is to built a flexible pack of batteries in series that wraps around the hub instead of a big honkin pack stuck to one side.
Your video inspired me and I did this to my two fat tire mountain bikes and the comments I get thanks for the idea goes for safety and never got pulled over by the cops lol people definitely see you coming.
You should of gotten a Lunasee HiViz system that uses a high power UV LED that attaches to the fork or frame that energizes the special glow tape on the rims
Nice mod...certainly does the job - the effects look great I'd rather run power to the wheel with brushes - I'd be worried about the weight imbalance with the battery.
Surely it affects the balancing of the wheels and could ruin your bearings? I know the bulk of the weight change is near the hub but there will still be an impact.
ready for some geek, it will actually make no difference, anything attached to the hub will only get centrifugal force. it will only be getting pulled outwards, from the motion of the spin. but it shouldn't affect the wheel in any manor unless it comes loose then flys out.
@@kallumbmx The centrifugal force will have an effect on the opposing bearings in the hub, the wheels would need rebalancing also because of the the led strip cabling.
Lads does this mean you need to buy two kits for the second Battery? Also would I have to buy a Milwaukee battery charger? 🤔 looks the mutts nuts 🥜 👌🏻👌🏻👌🏻👌🏻
I guess it's too much to ask for common sense from 'muricans. Of course the parts and shipping is expensive, it's from Finland :D It's the same thing vice versa, the shipping from US to Finland costs arm and leg. You can easily buy all the parts from Ebay, Amazon, DX.com whatever you prefer.
Блин все конечно здорово, но такой вопрос вам ребята. А вы не подумали что из-за батарейного блока на ступице создастся противовес, то есть балансировка собъется ? Если я допустим похожую идею хочу на какой нить к примеру CBR 1000 RR впихнуть которая ебашит под 300(я конечно условно но все же ) представьте какой там расколбас будет и какая вибрация
I don't understand the need for the big heavy tool battery? They are LED strips so use hardly any power and you would only have them turned on a short while at night... so all they need is a tiny power pack which could be USB rechargeable? Then you could neatly strap to the hub with some zip ties and barely see it.
Typically the smaller the pack the less the mah, you could use a 12v 3S Lithium Polymer battery, commonly used on RC drones. From experience a 2200mah one will last about 1.5 hours before the voltage gets to low but you can attach a voltage reader that will alarm when the voltage gets too low.
5 metriä lediä maksaa noin kolmesta viiteenkymppiin ellet tilaa tyyliin kiinasta ja odota 2 kuukautta pakettia. eikä toi uberteippikää ilmasta oo, muilla osilla ei nyt nii paljo oo arvoo. joo onhan toi vähän ylihinnoteltu mutta ei se oo tyhmä joka pyytää
You know how much time, effort and money that would take? It's like converting a car to generate energy by applying alternators to the wheels! Plus it's easier to use a power bank that can last a weekand you can take it off and put it right back on.
These are not waterproof... And also they had a problem of charging and turning on and off...... But the one I made... Were waterproof.. No problem of charging and turning on and of...... Now that's called excellent work...
Should have said dirt bike in the title instead of motorcycle! It's A LOT easier to do on dirt bikes. What kind of tape is that? ALSO, it's legal here in Oklahoma...
If you speed up the video to 1.75 it sounds like he is talking normally.
😂😂🤣😂 he really does!!
Omg yesss
Finnish people speak slower than your average english speaking man.
🤣 on point
I hear some indians
After watching this video I dont wanna do this anymore lol
Why
Those who know know.
So much for a balanced wheel.
His friend : Yo dude let's go for a ride
Him : i can't I'm charging batteries
Simple answer to the balance issue is to built a flexible pack of batteries in series that wraps around the hub instead of a big honkin pack stuck to one side.
See my same video of installing RGB led lights in motorcycle wheels without batteries.
👇👇👇
ua-cam.com/video/GFEUhZAK7qo/v-deo.html
Your video inspired me and I did this to my two fat tire mountain bikes and the comments I get thanks for the idea goes for safety and never got pulled over by the cops lol people definitely see you coming.
I'm so thankful for y'all making a tutorial thanks so much this is the coolest mod ever.
I need one ! Really good possibility, good vibe.
Jorian we can come to France in summer and build one of these LED wheels with you :)
Jorian Ponomareff sur le 636 hehe
We this would work on my electric e.bike scooter rims ??
Good build man, looks mad!
no
Great video , I think I will try this on my wr450f 👍
enjoy the shakiest ride ever
To upvote before watching is full throttleeeee 😁
Actually in Denmark those ARE street legal😂 hell yeah I'll save this video so i can do it on mine
hahaha i live in a lawn
Thanks for posting
neat idea 👍 did you balance the wheel and shrink wrap the power cables?
Looks amazing and super cool! Any guesses if the police like it? ;) Hahaha
Keep up the content love it fuck the haters
Nice👌 thoughts and it looks really amazing 😍..👏👏
How would you charge the battery for dis lights??
Disassembly?...🤔
You should of gotten a Lunasee HiViz system that uses a high power UV LED that attaches to the fork or frame that energizes the special glow tape on the rims
That look nice,
Hi! Where u get case for 18650? Or 3D model?
Cool!
Nice mod...certainly does the job - the effects look great
I'd rather run power to the wheel with brushes - I'd be worried about the weight imbalance with the battery.
with what?
Do like a old KTM exc 125 refresh/rebluild :)
This is going to really effect wheel balance though, won't it?
Yeah but remember, they're stunt bikes so they'll be off balance anyways
can the bike be wash?
Idea: Stunt Gas Tank Build
tuleeko ledien mukana se kaukosäädin millä vois vaihtaa väriä. BTW mä kasaan tämmöset. Mun pärräst tulee joulukuusi :)
Nice way to throw off a nice balanced tire😂
Yeah at 80mph you gonna feel that right nice like
See my same video of installing RGB led lights in motorcycle wheels without batteries.
👇👇👇
ua-cam.com/video/GFEUhZAK7qo/v-deo.html
On my bike alloy wheels Lage hue hain Allowheel is mounted on my bike, it will work in it
Remember to use LAD lights. It doesn't work with LEDs
I see what ya did there😂
lmao
Cool!!!!!
What type of battery is that?
is it safe for every day riding?
and can you connect it to the bike battery or the bike head light?
do you really think that a wire coming out of the wheel is a good idea ?
Surely it affects the balancing of the wheels and could ruin your bearings? I know the bulk of the weight change is near the hub but there will still be an impact.
FFS! You make your wheels light up so you can set a new track record round the isle of man, right?
@@theravedaddy no, but any thing that throws off the balancing will ha e detrimental effect.
ready for some geek, it will actually make no difference, anything attached to the hub will only get centrifugal force. it will only be getting pulled outwards, from the motion of the spin. but it shouldn't affect the wheel in any manor unless it comes loose then flys out.
@@kallumbmx The centrifugal force will have an effect on the opposing bearings in the hub, the wheels would need rebalancing also because of the the led strip cabling.
At the end of the day,the led strips powered by battery came out and the rest is history😂😜🤪
Better off using double face tape to the wheel, thin stuff... but making sure you use 3M™ Tape Primer 94
Do you have to balance your rims after the led install ?
Probably
Should of used a black led strip or el tape and you should put spoke covers on to hide the wires a little.
Lads does this mean you need to buy two kits for the second Battery? Also would I have to buy a Milwaukee battery charger? 🤔 looks the mutts nuts 🥜 👌🏻👌🏻👌🏻👌🏻
rc car battery would work just fine and is i lots of sizes.
Who is the owner of your garage? Or the hall?
"Car exsazt connactor ... you know what i mean." We do mate, we do 😃
Is that Eli tomacks bike the Kawasaki at 9.57
do you guys balance the wheel before you put it back on the bike.
No.
Not the best way.
But no.
Vibration is minor
@@stuntfreaksteam roger that.
thanks for the response.
Where i can get that wheel?
Laittakaa 3 kpl 18650 kennoa erillään tasavälein niin ei lisää värinää. Pysyy tasapainossa.
200$ for a thing that costs less than 20.... and shipping's not even free... xD
they don´t want u to buy it from them i think, would be to much work i think
I guess it's too much to ask for common sense from 'muricans. Of course the parts and shipping is expensive, it's from Finland :D It's the same thing vice versa, the shipping from US to Finland costs arm and leg. You can easily buy all the parts from Ebay, Amazon, DX.com whatever you prefer.
Anyone else get mad when he touched the rim right after it was cleaned?
El eh dee
Блин все конечно здорово, но такой вопрос вам ребята. А вы не подумали что из-за батарейного блока на ступице создастся противовес, то есть балансировка собъется ? Если я допустим похожую идею хочу на какой нить к примеру CBR 1000 RR впихнуть которая ебашит под 300(я конечно условно но все же ) представьте какой там расколбас будет и какая вибрация
дурачкам пофиг - главное красиво
onko tulossa mootorikelkkailu videoita. jos teillä on niitä kelkkoja
is this rokbagaros?
Suomi perkele
Are there kits available for Groms?
they are universal so basically work on any bike
Make Ktm lc8 or rc8 into light weight supermoto. Strip it off and left only what needed most.
Do tutorial how to put leds on atv
You just watched it
Tighten that muffler clamp tight to the hub!
Circus without balance
Are the Parts still available?
I wish, did u find any, u really just need tht battery
Terkkuja!
No tervve
I don't understand the need for the big heavy tool battery? They are LED strips so use hardly any power and you would only have them turned on a short while at night... so all they need is a tiny power pack which could be USB rechargeable? Then you could neatly strap to the hub with some zip ties and barely see it.
Thats a great idea. Thanks!
Typically the smaller the pack the less the mah, you could use a 12v 3S Lithium Polymer battery, commonly used on RC drones. From experience a 2200mah one will last about 1.5 hours before the voltage gets to low but you can attach a voltage reader that will alarm when the voltage gets too low.
They have 5v led strips now days. One 18650 lithium cell would work just fine
✨ Thanks for all ✨
siis 200e :DD maksaa n. 20e ostaa ite :DD
5 metriä lediä maksaa noin kolmesta viiteenkymppiin ellet tilaa tyyliin kiinasta ja odota 2 kuukautta pakettia. eikä toi uberteippikää ilmasta oo, muilla osilla ei nyt nii paljo oo arvoo. joo onhan toi vähän ylihinnoteltu mutta ei se oo tyhmä joka pyytää
Tuleeha siinä mukana millwakkeen laturi ja pariakkuaki. Voit neki googlata et paljo ne maksaa
The power bank that orange i thought it was that shotgun shell from nerf
Put some 18650 batteries together and it will last for days without a charge.
@@RBRM3 nice
In France, we call people who install this "kéké".
what do you call that external power source?
its a milwaukee m12 battery
Joo vähä liia vaikeeks menee
What type of welder is that
Kemppi Mig welder :D
ghost rider time
Dude I think you need to take off the double sided tape on led light 😁
Testatkaa mihin uusi DRAC pystyy ilman viriä
ei mihinkään
Balance the Wheel after?
WeekendWarrior how? It’s wayyy to heavy
Im gonna do this for a laugh, 3 weeks to wsbk at Buriram. Ill use a pp3 battery cos its tiny.
Go Buriram!. I am also going to that race. Ill be on a black cbr! See you there, what will you ride?
Really....Forest Fires? 🔥 🔥 🔥 lmfao
Have you ever seen lithium batteries explode?
@@FelipeGonzalezHerrera no...?
left side
Пушка!!!!
Haw to bild it on atv
Why its wheels and they show you how to build it so do it
OK, what about on/ off button without wasting the battery up?.. so, I don't have to keep unplug and plug back in...
just mow your lawn
199e tosta :D
Köyhälle kallista
Круто получилось
opsjtogs
What's a LAD
@Christian Schreuder he's being sarcastic lol 😂😂
Uber tape?
not uber! its a motorcross
Lam the nao sieu vay
lam is sheep in norwegian
En español xfavor.. ok
LAD lights? Or LED = light emitting diodes...
LED you spud
L.A Ducks
mä niin toivon ettei jonnet laita näitä mopoihin xd
Vois
olis aika huutista ku joku jonne vetää sillä tappoviri riejulla tollaset päällä :Dd
Throws tire out of balance
throws you out of common sense
For everyone living under a rock, different languages can pronounce vowels differently. Educate yourself.
yes very much
TF Is a "LAD" light?
Light-Emitiing diode. (Led)
Sir use carbon brush instead of power bank
You know how much time, effort and money that would take? It's like converting a car to generate energy by applying alternators to the wheels! Plus it's easier to use a power bank that can last a weekand you can take it off and put it right back on.
Anybody else pick up on the fact that he doesn’t want to ruin the wheel with glue but it gets ruined by solder😂😂
These are not waterproof... And also they had a problem of charging and turning on and off...... But the one I made... Were waterproof.. No problem of charging and turning on and of...... Now that's called excellent work...
Give yourself a cookie!
See my same video of installing RGB led lights in motorcycle wheels without batteries.
👇👇👇
ua-cam.com/video/GFEUhZAK7qo/v-deo.html
That’s too damn much to do just to install on bike rims
200€..
Should have said dirt bike in the title instead of motorcycle! It's A LOT easier to do on dirt bikes.
What kind of tape is that? ALSO, it's legal here in Oklahoma...
Ota varovasti soi taustal😂
First off u can biy 3m lightd that plug together that glue loos the shittiest ever man.
RRRRRRRRRRIIIIM
Nice on the night but ugly on the day
just like you