Hello Friend! Can you tell me if it is possible to set up a helicopter to fly by coordinates and return home on the h743 wing controller? ardu pilot,inav?
Hello Friend. (Sorry if that is not clear, I write through a translator) I collect the hk450gt helicopter on the APM2.8 controller. Stabilization works, but the problem is that there is no arming and calibration of the controller does not pass. There is no signal change on channel 8. What can be wrong?? The motor runs directly from the receiver. There were no such problems on the plane.
Looks like all of the features I have been waiting for have been accomplished. I have been sitting on an Align 600efl for years waiting for the software to be reliable (return to home, position hold, acro mode). I will pick up a Matek H743-mini and test it first hand in an Align 250 pro. Any reason to continue waiting?
Fantastic job on your programming tuning and setup! I have this flight controller on order. I was going to put it in an airplane, but think I may try it in a T-Rex 700 kit I've got laying around. But perhaps I should first try it on a little 500 before I destroy my big helicopter : ) I understand betaflight cleanflight and INAV but Ardu Helicopter will be new to me.
It is recommended to use a smaller 500 helicopter to contact the commissioning. The debugging procedure of Ardupilot is slightly more complicated than BF and iNAV, but it can still be successful with reference to the wiki.
Fantastic flight which software is best for a beginner to use and which boards work for a heli also is there a way to get your starting parameters for a heli
The cooperation of mission planner and ArduPilot firmware is most suitable for beginners. There is a more comprehensive wiki guide. According to the guide, patient and detailed settings, the probability of success is very high, see here: www.ardupilot.org Generally, the Pixhawk flight control and its Mod with built-in shock absorber can be used. Even many F4 and F7 flight controls can successfully achieve flight. I wish you luck!
@@zhangpengsir I have now the matek 765 board will the adrupilot firmware work intially or do i have to adjust setting's to make it work to start with thank you for your reply
Awesome
looks awesome with position hold on heli. there's not much videos about this compared to quads
Thank you for sharing this with us. I really enjoyed it.
is there a video on setting up a helicopter in ardu pilote?
Hello. Nice video and maiden. What helicopter are you using? Regards Dom
T-rex 500
Please tell me specifications
hey. Do you know if you can tell me if the ArduPilot fits a pixhawk 6c with px 4?
What is the flight time on that setup and pack?
Looks great.
thanks
Hello Friend! Can you tell me if it is possible to set up a helicopter to fly by coordinates and return home on the h743 wing controller? ardu pilot,inav?
Absolutely ok, with ArduPilot firmware, with GPS and electronic compass
Hi nice build! Can I see a picture where the flight controller is mounted? Did you connect directly the power to the matek board?
Awesome!
I'm sitting here with my first setup, and I'm EXCITED:-)
Hello Friend. (Sorry if that is not clear, I write through a translator) I collect the hk450gt helicopter on the APM2.8 controller. Stabilization works, but the problem is that there is no arming and calibration of the controller does not pass. There is no signal change on channel 8. What can be wrong?? The motor runs directly from the receiver. There were no such problems on the plane.
SHOW ME HOW TO CONFIGURE FLIWING H1 I have done several times it does not work
Looks like all of the features I have been waiting for have been accomplished. I have been sitting on an Align 600efl for years waiting for the software to be reliable (return to home, position hold, acro mode). I will pick up a Matek H743-mini and test it first hand in an Align 250 pro. Any reason to continue waiting?
did you do it yet?
Fantastic job on your programming tuning and setup!
I have this flight controller on order. I was going to put it in an airplane, but think I may try it in a T-Rex 700 kit I've got laying around. But perhaps I should first try it on a little 500 before I destroy my big helicopter : )
I understand betaflight cleanflight and INAV but Ardu Helicopter will be new to me.
It is recommended to use a smaller 500 helicopter to contact the commissioning. The debugging procedure of Ardupilot is slightly more complicated than BF and iNAV, but it can still be successful with reference to the wiki.
Fantastic flight which software is best for a beginner to use and which boards work for a heli also is there a way to get your starting parameters for a heli
The cooperation of mission planner and ArduPilot firmware is most suitable for beginners. There is a more comprehensive wiki guide. According to the guide, patient and detailed settings, the probability of success is very high, see here: www.ardupilot.org Generally, the Pixhawk flight control and its Mod with built-in shock absorber can be used. Even many F4 and F7 flight controls can successfully achieve flight. I wish you luck!
@@zhangpengsir I have now the matek 765 board will the adrupilot firmware work intially or do i have to adjust setting's to make it work to start with thank you for your reply
What apps did you use in mobile phone?
today i test mine with petrol engine. I have only problem with the pitch control but let see :) How default parameters are worked?
Another success maiden.Good job
Is that with governor ESC or just a regular one?
Governor ESC,HOBBYWING V4 60A
@@zhangpengsir where did you connect the yellow RPM wire on the flight controller? please 🙂
please link flight control
support RTH with gps
Nice...
Ух,опасная тема вертушка на открытых мозгах.
amazing ! where can I find a how to vid or website and the list to buy? big thanks
FW www.ardupilot.org,FC mateksys.com
Awesome. Would it be possible to start with 450 frames( belt) or are they to small for this additional equipment?
what helicopter model is that?
T-rex 500pro
Are your separate gyro and flight controller ?
No separate gyro is used, all from the control of the flight control
Can you teach me please .