Ooo I love that box Paul, I might have to commission you to make me one for storing art supplies in! Great video and very interesting to see the process and to imagine the possibilities that could come from this. From your early days of No Name Junction, it's great to see all the creativity that has evolved since then. Keep it up and keep filming all these sidelines to your layout, it all adds up to a very interesting channel. Ignore the negative, rude comment from someone before, you're doing a great job!
If your painted disc gets stuck in the mount, a finger hole or two in the back plate will let you push it out. That will also let you remove the disc, without touching the painted surface, while the paint is still wet. Hold the mount flat, push the disc up with your fingers and manouver it above the cut circle. Tilt the mount to let the disc slide gently onto a flat surface.
Hi Paul, that laser cutter engraver looks really good and your storage box came out very well. I was thinking that you could put a small hole in the back of your circular painting board holder then you can always push out the completed circular painting if it did get stuck.
U do know that bit of u called now that’s scrap wood u could of still used it all u did was engraved into it all u need to do was change the settings and it would off cut it out
Hey, you are more than able to press the unsubscribe button. It is my channel, and I will film and upload the content that I enjoy making. I would encourage you to unsubscribe from Sandling Junction if you do not enjoy my content. I have little time to waste on such comments and those who feel they have a right to make them. Please remember it takes a lot of time to create, film and edit all videos for people to enjoy for FREE. Maybe you should try it for a few years before you comment in this way.
Ooo I love that box Paul, I might have to commission you to make me one for storing art supplies in! Great video and very interesting to see the process and to imagine the possibilities that could come from this.
From your early days of No Name Junction, it's great to see all the creativity that has evolved since then. Keep it up and keep filming all these sidelines to your layout, it all adds up to a very interesting channel. Ignore the negative, rude comment from someone before, you're doing a great job!
Cheers Wendy, I plan on doing just that, P
Wrap the bottom and the sides with candle wax the most drawers will slide beautifully
Yes I think I mentioned that, it is always a good plan, cheers P
Amazing, Simple when you know how. Congrats.
Well a learning curve that is steep, but rewarding, cheers P
If your painted disc gets stuck in the mount, a finger hole or two in the back plate will let you push it out. That will also let you remove the disc, without touching the painted surface, while the paint is still wet. Hold the mount flat, push the disc up with your fingers and manouver it above the cut circle. Tilt the mount to let the disc slide gently onto a flat surface.
Thanks, Henry, that is a great idea. It will be done
great vlog on channel keep up the great vlogs on you channel thanks for the share on your channel
thank you for that cheers P
Hi Paul, that laser cutter engraver looks really good and your storage box came out very well. I was thinking that you could put a small hole in the back of your circular painting board holder then you can always push out the completed circular painting if it did get stuck.
That is a great idea for V2 cheers P
Nice to see the mess, makes me feel a bit better about the state of my desk 😂
always a huge ongoing struggle lol, cheers P
👍 Good advert for the Creality thingy😴
Buy some tool magnets and screws to the wall
sorry I missed that one tool magnets I needed to check on, but screws ate the issue in my case, cheers P
U do know that bit of u called now that’s scrap wood u could of still used it all u did was engraved into it all u need to do was change the settings and it would off cut it out
yes I realise I keep most of the offcuts for smaller projects, cheers P
@@Sandlingjunction alright that’s good 😊
Another long drawn out video. It's all about the layout that we are not seeing....if this keeps up I'm gonna UNSUBSCRIBE
you could have simply just said "can you do more of the layout please?" Or read the title of the video and just ignore it! 🤬
Hey, you are more than able to press the unsubscribe button. It is my channel, and I will film and upload the content that I enjoy making. I would encourage you to unsubscribe from Sandling Junction if you do not enjoy my content. I have little time to waste on such comments and those who feel they have a right to make them. Please remember it takes a lot of time to create, film and edit all videos for people to enjoy for FREE. Maybe you should try it for a few years before you comment in this way.
@@Sandlingjunction 💯 bang on