You only show the final glue up! What good is that? Apparently the first time I viewed this it was a preview. I’ve since watched the whole video and I’m really impressed!!
That is really great. I can certainly see myself doing something akin to it. I think making the solid corner into a small basket weave would be nice. I would prefer having a voice over rather than the captions. They are distracting. They take away from following the work you were doing. Also, the music was so bad I had to mute it.
Nicer music cost money and this channel does not make big profit so sorry about it. I would do voice over but english is not my first language so captions is the best option for me . Thanks for comment ;)
I’ve been building this board for about a month (maybe more) and it’s not as easy as you make it look. A warning for people who try this. DONT use wood that has previously been glued up into boards as they will break and fall apart when you are cutting them into the 18mm or 9.5mm strips. But hey ho, it’s all a learning curve
@@lioneldegrace4369 Are you a member of fb groups like cutting board hobbyist or endgrain cutting boards? If yes can you share your results up there? I would love to see your work
I am in the country where broadband signal is very poor so I can not watch youtube and do not have this board with me. As soon as I back home I will try to answer your question
Don’t worry about it I will figure it out. It seems like every UA-cam video about carpentry either has no measurements or only a few, it’s all just a tease to get people to watch, I have watched the video at least 15 times but I will make it despite the lack of plans
I'm not sure of exactly how you did it, I saw an awful lot of marking and drawing of lines,for all I know, you made a wooden block and drew the bricks on the block!
ح0
Wow!
Caballero usted es un genio, mis mayor respeto, me pongo de pie y me saco el sombrero para saludar a un grande !!!!!!
gracias :)
At the beginning I thought you said 2 boards. Did you combine 2 boards or end up with 2 identical boards?
I ended up with 2 identical boards with different brick pattern as I showed at the end of the video
You only show the final glue up! What good is that? Apparently the first time I viewed this it was a preview. I’ve since watched the whole video and I’m really impressed!!
Every glue up is shown on the movie
Awesome board 👏 and great tutorial 👍
Thank you
fantastic boards! Wonderful problem-solving!
Thank you
Parabéns ficou muito linda essas tábuas esse 3 d ficou inprecionante
)
Increíble con tu impresionante diseño y muy bien hecho....Saludos de Anaco, Anz.
That is really great. I can certainly see myself doing something akin to it. I think making the solid corner into a small basket weave would be nice.
I would prefer having a voice over rather than the captions. They are distracting. They take away from following the work you were doing. Also, the music was so bad I had to mute it.
Nicer music cost money and this channel does not make big profit so sorry about it. I would do voice over but english is not my first language so captions is the best option for me . Thanks for comment ;)
I finally made the two cutting boards and I also saved a lot of time and mess by a method I found to run them thru my thickness planer
Great vide man! Did you ever figure out the outline dimensions for the 390 x 150 boards?
Thanks :) I do not remember. It was long time ago
I’ve been building this board for about a month (maybe more) and it’s not as easy as you make it look. A warning for people who try this. DONT use wood that has previously been glued up into boards as they will break and fall apart when you are cutting them into the 18mm or 9.5mm strips. But hey ho, it’s all a learning curve
No one of my boards is easy to make 😀 but worth it
They look awesome! Great stuff!
Thank you
Can this be made with just one board?
I am afraid no
What I meant to say was can I make one board , I have all the first glue ups for both boards done, tomorrow I start the cuts !
@@lioneldegrace4369 Are you a member of fb groups like cutting board hobbyist or endgrain cutting boards? If yes can you share your results up there? I would love to see your work
This is one of the best boards I’ve ever seen! Great work!! I’ll tag you if I’m able to make it 😬😳
Thank you ;)
Great video, well done, kudos to you.
Thank you
Wow! Great design! Beautiful result.
Thank you
Fantastic design !!
Thank you
Precise math is impressive; metric is the only way to be able to do this board. I am a believer!
Thank you sir 😉
I like that you added the disclaimer at the beginning.... Protect what you created
Thank you 😀
Fantastic boards
Thank you
Te pasaste eres fantástico felicitaciones increíble lo que as logrado con madera no hay palabras con tan bella creacion
gracias :)
WOW
Well done!
Thank you
Time consuming but the result is incredible 😯
Thank you
nice
Thank you
Well done and very beautiful
Thank you 😉
Incredible board!!!
Thanks sir! Great!!
Thank you
Well done! Came out awesome
Thank you 😉
Great design!
Thank you
A true artist at his craft. Very beautiful
Beautiful ❤️
Thank you :)
What are the measurements of the outline of the 390 x 150 board
I can not tell you now. I am on holiday far far away. Sorry about that
You are kidding me mate aren’t you
I am in the country where broadband signal is very poor so I can not watch youtube and do not have this board with me. As soon as I back home I will try to answer your question
Don’t worry about it I will figure it out. It seems like every UA-cam video about carpentry either has no measurements or only a few, it’s all just a tease to get people to watch, I have watched the video at least 15 times but I will make it despite the lack of plans
🔥🔥🔥🔥🔥
Thank you :)
nice work
Thank you
👍🔥🔥🔥🔥🔥
Thank you 🙂
Thanks for sharing
You are welcome
I'm 76, new woodworker, everything I've learned is because of people like you
Thank you 😉
I'm not sure of exactly how you did it, I saw an awful lot of marking and drawing of lines,for all I know, you made a wooden block and drew the bricks on the block!
If this video is not clear enough for you I would recomend to you try and do easier one. This one is really hard to do
Did you trim the boards at the border lines?
I am not sure I understan your question. If you meant trimming before glue up border/frame answer is yes, a little bit
@@rswoodland8162 I meant the borders you drew on the 4 panels.
So yes, I little bit
WoW ! great job
Thank you :)
The music is so Annoying it takes away .
Im sure it's a great project , just couldn't watch it ??
Better music cost money and I am small creator. Can not afford paying for better music. Sorry about that
Hey Juan there is a really cool thing on your computer called a volume key....TURN IT DOWN AND STOP COMPLAINING PRINCESS
Rs just ignore idiots like Juan. They are just looking for something to complain about
@@daveklein2826 🤠 hey. K. K. K. BOY
that music Really SUCKS ??
Make sure you don't turn into a
MASSS SHOOOTER ??
Like your BROTHER in 2019 TEXAS:
@@daveklein2826 🤠 typical K. K. K. BOY
like the MASSS SHOOOTER in TEXAS ??
Nice design and end result!
Thank you :)