ICON Airflite Helmet Review at RevZilla.com
Вставка
- Опубліковано 9 бер 2018
- ICON Airflite Helmet Review
www.revzilla.com/motorcycle/i...
One look at that face shield, and the Airflite had your interest. Yes, that’s a massive full-length shield with badass intentions and plenty of visibility. Those chin vents aren’t just for looks, as they can blast air into the helmet for unparalleled ventilation. Fear no sun with a drop-down visor hidden away in the shell. For the full Airflite effect, you’ll want to look at our face shield options as well. In the safety department, it’s DOT/ECE rated. Oh, and everyone will be looking at you. What’s safer than that? - Авто та транспорт
Everyone forgets to mention that these Icon helmets have a halfway-lock position for the internal sunvisor.
Which is a huge selling point, it means you can essentially have a sun-block while the road ahead is still 100% clear.
I absolutely love how quick you get into the review. 15 seconds and you're already discussing the product. A+
Akroma Martell honestly. I love how he reviews stuff. Straight to the point
Heydisantonywivrevzillawhereu can watch, decide and ride
Sounds like you were about to clock out and boss was like "I need you to do an Airflite review video before you leave."
Love the helmet!!! It just saved my life after I hit a guard rail at 30+ mph in a curve. When I say saved my life I mean if I wasn’t wearing the helmet the my vertebrae would be broken instead of a fractured.Ventilation does its job in semi warm days, if it’s too hot the secondary visor helps. Looks super cool! Got several comments about it. Only drawback would be the helmet has a lot of wind noise. Ear protection is recommended. Overall love the helmet and wouldn’t be here today without it highly recommend!!!
Please put this in .25 speed and watch the intro XD
Entered a new world
Fuckin hilarious
DO THIS IT IS WORTH IT
Lol like it. Then 1.25 ... Coked out
Thank you! I needed cheering up today and that was hilarious! 🤣🤣🤣🤣
Love my Airflite but yes, I installed a cardo packtalk to mine and took a bit of customisation and cutting to get the clamp mount to work
Jesus Christ I haven't seen a video from you guys in months and I've been subbed forever! UA-cam screwing you guys over.
Tye The Great ring d bell
same wtf lol just looked and they have posted a fuck ton recently
Tye The Great I
they post videos like every few days.. refresh your feed often or hit the notification bell
Why are you calling Revzilla Jesus Christ?
I've put a couple hundred miles in with this helmet over the past week since it arrived. I have two gripes with it so far. The first one being the size, when you head turn at speed (60mph+)its like sticking a cardboard box out of the car window doing 60+mph, you just catch a facefull of air that wants to push you off the bike. Also when wearing a backpack the neck cutouts seen 3:05-3:20 at are always catching on the shoulder straps for me. The other problem is the full tuck position. It's not very good at all, I have to adjust the helmet by tilting it back on my head to be able to see anything more than a barely-1-inch gap between my windscreen and the top of the helmet. I maybe could have gone one size down on the helmet and maybe that would help, but a Medium fits nice and snug and I can't squeeze any fingers in anywhere between the visor cutout and my face, I also have to push down from the top to get the helmet on, so it fits nice and tight. The forehead cutout could have been a bit higher to better accommodate a full-tuck position.
It may be just the nerd in me, but with the right tint on the visor and the helmet color you can look like a spartan from halo, or the closest thing to power ranger you can get. Either way it’d put the biggest smile on my face to see it
So glad to find this review!!! My husband just surprised me with one of these that I'd seen, tried on, and fallen in love with.
Pro: It's gorgeous!! I got the "Blue", which is a graphic of an underwater scene... swirling seaweed, bright orange octopus tentacles, fish, seaweed, etc. I love it!
Con: It nearly takes my ears off when I remove the helmet. It fits great; it's just the way it's made.
Thanks again...I look forward to shopping with you guys. My grandson swears by y'all!
That "Inky" Graphic is great! Enjoy! -DrewZilla
I do like this helmet a lot! Thanks for the details! But that small problem while mounting Bluetooth communications.
Actually, remember "Silverhawks" in the 80's? This is damn close to the helmet style
You are the only one who mentioned UV. Thank you
.
Bought one about a month ago, did about 400miles with it. The sealing around the inside of shield is not there at all (more on the top forehead area) therefore when going normal highway speeds the wind noise was extremely loud, and whistles. Also no matter what position the face vent was on there was still an uncontrollable amount of air flow coming through. Fit was good but whole face/shield area needs A LOT of work, would not suggest.
I settled on an icon airflite because I couldn't afford the full carbon helmets that I wanted. Helmet I received was beautiful. It was really hard to put on, but once on it was snug and comfortable. It provided very loe noise and I soon forgot about the Ingress and egress because what's important is when you are on the bike. Highly recommended...
That intro is funny. Made my day.
excellent review!
Please review the EVS Stratus Warbird Helmet you guys sell. I love the design but can find no intel on them except they make great motox helmets. Love the icon I own 1.
After owning this helmet for about a half a year i bought myself a cardo packtalk bold and i installed everything. When i was riding at full volume i wondered why i cant understand anyone but my friends can hear me... it turns out the cutouts for the speakers are about 2-3 inches behind my ears. I don’t know if i have a weird head or ears but its a deal breaker. I cant mount it further up because the cheek pads are in the way then... too bad
I am going to have to buy a version of this helmet...also, your tool room is entirely to clean😆...cheers👍
The Cobra Commander helmet...that's my shit right there! Def getting one.
That's the first thing I thought when I seen this lid
IF Icon makes one, I will buy it.
Hi!
Good reviews as always!
I have the Airflite Blockchain 2022 model, and i dont have the same issue with the cheek pad. In fact, I don't have exactly the same cheek pad model.
I only have velcro without the plastic border which seems problematic in your video. Have they changed the cheek pad for 2-3 years?
Really digging the helmet and a good review! One question, can you reach the chin vent switch with the chin skirt in?
Yes, you can reach it. -DrewZilla
I've wore this helmet for my first 400 miles on my new bike and I like it so far. When I'm under 55 mph I just use the drop down sunglasses, but anything higher I use the face shield, and it's not too noticeably loud until you're like 70 mph+ where I have to crank up the audio on the helmet speakers I installed. Air flow is really good.
Gonna be deaf lol
Holy crap, first time that i see Anthony make a verbal mistake.
Fistbumpbros
Me too.
Quite impressive when you consider just how lightning fast he speaks.
Somebody missed an edit
Timestamp?
Id say someone forgot an edit
Manuel Barrio 7:37
I just got this helmet. It seems the the mouth vent has 4 setting. Is all the way up deflect wind to the face shield?
Hey can you review the MIPS sealth airflite. Does it weigh more? Is mips a gimmick?
Just picked one up. Loving it.
I'm considering it for an ebike that goes up to 40 mph. How do you like it so far??
Super duper badass!
@revzilla , is the interior visor replaceable if I’d like to have a clear one? If so is that something you carry on your site? Great review as always and Thank you for your time!!!
Yes, the internal drop-down visor is replaceable, and a clear version is available. It uses the same internal visor as the Alliance GT. -DrewZilla
*www.revzilla.com/motorcycle/icon-alliance-gt-inner-sun-shield
RevZilla ok great. I’ll be ordering the lid, a windscreen and a visor on Tuesday or Wednesday. Thanks a bunch for your time.
Very very amazing design, look like futuristic helmet from the future film
This guy’s closet is full of multiples of that same shirt
True Story. -DrewZilla
He's like Homer Simpson lol
LOL, I was just noticing that after having watched him in a 2010 video.
KingN8Boogie i actually buy plenty if clothes in bulk. I actually own 3 of the same pumas too
will you guys review X803 anytime soon?
looking forward for this helmet review
We'll likely review it, but we don't know exactly when we'll shoot a review. -DrewZilla
Good day sir. Can i ask my head shape is round and the size is 61-62cm can i still use this helmet? If yes what size should i get?
The only bad thing I could say about icon helmets in general is that the visor from inside has anti fog coating wich expaiers even if you don't use it and its in oem packing
I saved this helmet on my wishlist
Why does the helmets I like is not suitable for my head shape? :( round oval heads problem
@RevZilla hey, douse anyone know if the face shields are fogfree? or do they come with a pinlock ready fit?
The shields have an anti-fog coating, but there aren't any Pinlock shields for them currently. -DrewZilla
Cobra Commander called.....He is holding a country hostage for his helmet back.
So, i previously had the Shoei Qwest.
Now, i know that theres a lot more going into windnoise than just the helmet, obviously but, very generalized, would you consider the Airflite to be on the quieter or louder side in terms of windnoise? i wanna use my Sena with it and also use it for touring, two things where i would prefer a quieter helmet.
The Airflite is louder than the Qwest, and it has a very different fit as well. The Qwest had a bit rounder fit, while the Airflite is a much narrower fit. The Shoei RF-SR is the successor to the Qwest, but of course it doesn't look like the Airflite. -DrewZilla
*bit.ly/Shoei_RF-SR_
thanks for the video. but I need to ask is Dot and ECE able to be worn at a track where you are from? Here where I live in Indiana we must wear Snell at the track. again thanks for the video.
It all depends on your track day organization to be honest. Since a lot of MotoGP and WorldSBK racers are out there racing at the top tier levels with ECE helmets, it is tough for track day organizations to say that that standard is not good enough and SNELL is mandatory. It all depends on your local organization but a few in our region have no issues with ECE only as long as the helmet is still within its factory lifespan.
Patrick McHugh thank you for the info.
I have an intermediate oval shaped head will I have any fitment issues with this helmet? Also my head in inches measures 23 and 1/2 inches around should I order a large?
There's a good chance this helmet will be too narrow for you. I have an intermediate oval head shape, and it is too narrow for me. If you size up to get more width, the helmet will likely be too loose front to back. If you want to try, though, you can try size large. -DrewZilla
*www.revzilla.com/icon-airflite-helmets
Revzilla, can i install an Cardo Bold unit on this helmet. One of your competitors, informed me that i wouldn't be able to. Let me know, thanks.
The PackTalk BOLD can fit, yes, but you cannot fit the PackTalk Slim. -DrewZilla
*www.revzilla.com/motorcycle/cardo-packtalk-bold-headset-2018
Just got myself the helmet but the helmet is realy a tight fit! my size = 59/60 (L), but when putting on this helmet it actually hurts and had to detach the shin part, beside that i suppose after some time the leather inside and the cushens (if i say it correctly) will soften up
Yes, Icon helmets are generally hard to put on, but the padding does loosen up over time. -DrewZilla
Don’t think that’s the helmet riders will be wearing with Bluetooth.In watching that’s a very Cool City helmet
Bar Hopping Cool ! Get to mess with others while on Poker Runs lol But most of all seems to be a safe mid priced one n flow good air for these Hot Southern mornings ✌🏻🐊
Does the medium helmet fit multiple size lining/cheek pads on the side like other icon helmets? My medium is just a little to tight.
Yes for the cheek pads. We don't carry the liners yet, but I imagine they'll be the same as other Icon lids. Should be able to get thinner pads in there no problem, but not thicker. -Kraus-e
Can we remove upper nose protection
Mine developed a squeak after a few months, they want you to pay for shipping and be out of a lid while they decide if its "safe". I do believe this is a safe lid if you can live with squeaks at the slightest step or movement also the visor(lightsmoke) the tint is literally falling off and really turned me off the new variant pro if its just gonna be a squeaky sob, I expected more from 2 companies I've legit spent thousands of dollars with
How loud is the helmet?
Hi mate , I’m a XL for the icon variant deployed.. which size should I go for the airflite ,, regards
You'd likely fit the Airflite in size XL as well. -DrewZilla
*www.revzilla.com/icon-airflite-helmets
How is it in the morning with fogging up? Better than the normal style helmet? That Bain type front LOOKS like it might not fog as much.
It's similar to a normal face shield. It's not as good as a Pinlock face shield with Pinlock lens insert, but the Airflite doesn't support Pinlock. -DrewZilla
What's the black and yellow helmet on the left behind you?
With the air vent like that on the chin section, is it a problem internally mounting my microphone for my packtalk?
No, it isn't an issue. You can always mount the microphone slightly offset from vents. -DrewZilla
I can't figure out what is the benefit of the shield extension. It makes the helmet heavier and sticks out when the shield is open.
aesthetics
BrokenFiddles it does NOT make the helmet hevier
MonstaFreak13 how would it not make it heavier? More material more weight. To be fair it’s probably negligible but it is adding weight. Biggest point I see is how much that helmet probably sucks wth the visor open.
except they took out area for the shield to fit smoothly, so unless the shell material is lighter than the shield, it still would lose a little if not stay the same.
In which sizes are the different shells. I need to order cheek pads and I have a medium. Are the large and extra large shells the same?
The shell size breakdown is XS-SM, MD-LG, and XL-3XL. So for you, size medium and large cheek pads are interchangeable (medium are slightly thicker than large cheek pads). -DrewZilla
*www.revzilla.com/motorcycle/icon-airflite-cheek-pads
Does Lemmy know you shot this in his garage? Also, I'm pretty sure that radio is the one I had in 3rd grade. Please tell Spurge I want it back already.... oh.. nice lid. Every single helmet (or at least those above the basic entry level price point) should provide easily installation of a bluetooth communicator. It's 2018 already.. speaker pockets, clamp mount ready.. all should be part of the design to begin with. JMO
What’s that writes look at away he does at 0:00
What about noise how is it
OMGosh!!!! I just noticed Anthony has a little twitch at the beginning of ALL his videos when he says, "HEY, This is..."!!! He twitches downward left in all his videos. Bwhahahahahahahaha!!!
Is the chromatic/ mirror face shield dark from the inside? I mean, can you ride at night with a mirrored shield?
Mirrored shields have a smoke tint, so you should not use them at night. -DrewZilla
does it fit larger heads without having to remove cheek pads?
Timothy C the neck roll on icon helmets are ALL a pain to get past but once you get in there it feels amazing.. i like the neck rolls, once theyre on my neck. i wear XL and i have a lot of hair so i found that the heat cap things help contain my hair and make sliding on helmets easier
I've read some reviews saying that this helmet runs smaller. I've got head circ. of 55 cm. Should I get the Small or Medium size?
It has a narrow fit and tight seal around the neck, but it does not run small. At 55cm, that is definitely size Small. -DrewZilla
*bit.ly/ICON_Airflite
So I just bought this in large and I'm measured at 7 1/2" and its a bit tight. Should I keep or go size bigger?
It should be a bit tight. If you wear a 7 1/2 fitted hat, then you should probably be in size large. Try wearing it at home for about 30-45 minutes to see if you develop any pressure points. -DrewZilla
RevZilla is it supposed to be uncomfortably tight when i try to equip or remove the helmet?
This helmet runs tight on me too. Im a small in other brands but this one i am a medium
Does anybody notice Anthony's been greying recently? Has it really been that long already?
I think that’s just lighting.
It's called getting older dude. Everyone's doing it these days.
1 year with this helmet, quite noisy indeed but amazing looking and i've just fitted a Cardo system on it. Next step: go pro mount and a NOJ Quiet Rider Helmet Skirt
How easy is it to mount a cardo to one of these?
@@corbenmatthews9890 easy to install the cabling but i had to carve out a piece of foam to fit the speakers
Is this true to size?
looking for a new helmet...having a very difficult time finding one....i am 6'2" and over 400lbs so yea.....its hard.....I need a full face helmet...how do i size it for me -23" around my head just above the ears....Thanks
Generally, you match the crown circumference to the helmet size and then get thinner or thicker cheek pads if necessary. At 23 inches, that would be size Large. -DrewZilla
I have a really big head and at first it’s super snug but then gets more comfortable after a few days or so.
Am I the only one that doesn’t get tired of the intro?
Hopefully someone can answer this? Does the helmet come with a faceshield that is pinlock ready? Or do I have to purchase a second faceshield AND the pinlock shield, both separately? Which obviously would mean about another $80 or so I'd assume.
The visor that is included is not pinlock ready, but the included visor has anti-fog and I haven't had any issues with it fogging up. There's more than enough ventilation, and if you avoid having your visor down constantly there isn't any need for pinlock really.
Can you change the drop down visor to a clear visor?
Yes, you can purchase a clear inner shield separately. -DrewZilla
*www.revzilla.com/motorcycle/icon-airflite-alliance-gt-airform-inner-sun-shield
That sun visor is beast!... I love this helmet. My icon pro wasn't as good at top speeds like this one is. Dont buy it please... I wanna be the only one LMAO
Is it a safe hemet?
Just got this helmet. Not sure if I should exchange it. Once on, it fits perfectly - only problem is putting it on and off. Putting it on is hard but doable, but taking it off is when the problem arises. It's just sooo hard! Ears are getting folded back and hurting when taking it off. Should I exchange and go up a size?🤔🤷♂️
It's completely normal for it to be hard to put on and take off. It's the same with the Airmada and Airframe Pro. If it fits good and snug once on, then that's the right size. Don't go up a size. -DrewZilla
@@RevZilla Thanks for the clarification!👍 I had put in a return request when first trying it on. How do I cancel this? Or would I just let the request lapse?
Can I use the silver visor with this helmet during night?
No, all mirror and tinted visors are not intended for night riding. It's best to stay with clear for nighttime riding. -DrewZilla
I would love this helmet, with the covered over the mouth visor, but I live in The Netherlands... Does anyone have any tips? Also does anyone know if this model is EU approved?
Yes, this helmet is EU approved, as it has an ECE rating. You can see the ECE label below the DOT label at 2:29. -DrewZilla
*www.revzilla.com/motorcycle/icon-airflite-helmet
*www.revzilla.com/motorcycle/icon-airflite-rubatone-helmet
RevZilla I see, thanks! Do you know if it's easy to attach a cam on it?
Anthony you fucking beast, how many times did you rehearse that, or did you read it off-screen? Cause it was fucking epic! I'm buying one right now!
Looks more like cobra commander then bane with a chrome shield.
COOOOBRAAAAAAAAA!!!!!!!! LOL
Can anyone give me some opinions or feedback based on other helmets about how this one will fit? I want one but I’m concerned that a medium (which is what I normally wear) won’t fit.
It fits similarly to the Airmada and Alliance helmets. It's a bit narrower than intermediate oval helmets like those from Scorpion and Shoei. -DrewZilla
Wanna ask a question. My helmet size in LS2 is small. Should I get size small for this one? Thanks!
Yes a size Small should be just fine. If you have any other questions or concerns, please reach out to our Gear Geeks at cs@revzilla.com or 877.792.9455. Ride safe, -Pat
@@RevZilla thanks, Pat! Keepsafe.
Ya as much a as I like the look the mounting of comm’s is a deal breaker for me ..guess airamada it is!
Is it really that loud?
do you think a Cardo Packtalk Slim would work with this helmet? They don't have it on their compatibility list but is that because they just haven't tried this helmet yet? or because it won't fit at all?
Due to the big neck notch at the back of the helmet, a PackTalk Slim is unlikely to fit. The battery needs to sit flush along the backside, and the neck cutout won't allow the battery to do that. -DrewZilla
@@RevZilla good to know thanks... I've been so happy with my Airmada that I would likely just get another one if or when I decide to buy a new helmet again. I was able to install it on my Airmada, had to make a hole in the rubber at the back of the helmet to clamp on the battery and their website said to use the long clamp... I found the short worked better for the Airmada helmet.
You're welcome!
just bought airflite; it is easy to put on and once I put it fits well, but I struggle taking it off. Anyone else had this issue? Will the pads become looser after some time?
Yes they will I've had one for about a month now and it slides on and off fine now
This is totally normal for Icon helmets. -DrewZilla
Would you recommend the Shoei Ryd or this one?
If you can afford Shoei, then get the Shoei. -DrewZilla
RevZilla thanks:)
You're welcome!
will a sena 20 mount right up fine??
Yes, a 20S can be mounted pretty easily. -DrewZilla
They should make this in red and purple, then make a visor that has Magneto's face on it.
BTW, If you like a chin mounted GoPro, this helmet won't work very well.
how much ?
Finally some options for us long-oval noggins that don't cost 650 bucks.
potential next helmet, how long do icons last?
Helmets should be replaced after 5 years of use. -DrewZilla
but would the helmet last 5 years? i heard icon helmets start falling apart after 2-3 years
It depends how well you take care of the helmet and/or how often you ride. If you're a weekend rider, a helmet will last longer than if you are a consistent commuter or do a lot of long distance touring. I've seen Icon helmets easily last 5 years, while I've seen others that are used frequently enough that they need to be replaced after 3 years. -DrewZilla
I ordered a size bigger and it’s super tight still.
So wut other options do I have for Bluetooth mounting for this helmet?
I would go for a sticky mount like the Sena 10R. Because of the narrow shape, Icon helmets aren't particularly comfortable with Bluetooth headsets. But if you have a narrow head to match, it should fit well enough. -Kraus-e
*www.revzilla.com/motorcycle/sena-10r-low-profile-motorcycle-bluetooth-headset
@@RevZilla would that venom looking helmet fit better with Bluetooth solutions?
Yes, HJC RPHA 11 Pro Venom is much better for Bluetooth communicators, especially the PackTalk Slim. -DrewZilla
*www.revzilla.com/motorcycle/hjc-rpha-11-pro-venom-helmet
*www.revzilla.com/motorcycle/cardo-packtalk-slim-headset
Would a large vector 2 size fit
Chances are good you'd be a LG in the Airflite as well, but it's always best to measure and see where you fall on the new helmet's size chart. They aren't all the same. -Kraus-e
*www.revzilla.com/size-chart/10
I'm wired about the wind noice in this helmet ! . Is it that bad ?
It's average for wind noise, so it's not that bad. We always recommend wearing earplugs though. -DrewZilla
Bought this today, added a smoke shield. $300
What is that piece that you put your helmet on?
We affectionately call it a donut. We have a few options available. -DrewZilla
*www.revzilla.com/motorcycle/icon-helmet-service-pad
*www.revzilla.com/motorcycle/oxford-helmet-halo
@RevZilla so now the question is how intermediately oval is Anthony's head?
Anthony is on the slightly narrower side of intermediate oval. -DrewZilla
This dudes on speed right?
Can you wear it for an electric long board?
You could, but I think any motorcycle helmet would be too heavy and uncomfortable for that. At the very least, a dirt helmet will be lighter and better at flowing air. Better yet, try looking for a full-face downhill skateboarding helmet. -Kraus-e
*www.revzilla.com/dirt-bike-helmets
I just prefer the look of the helmet plus i am looking into getting a motorcycle as well
Im a perfect fit in this helmet at xl. Will that be the same for an airmada? Help me out boys and girls. 😊 thanks.
You would very likely be XL in the Airmada as well, though keep in mind that the Airmada has a slightly smaller neck opening. That makes it a little harder to put on, but that's normal. -DrewZilla
@@RevZilla so that was bery tight for me on the airflite. But i gotta get me a lepricon lid. 😊 thanks for the answer. !
You're welcome!
@@RevZilla the airmada seemed to be a lot shorter. My mouth almost touches helmet.
How safe is this helmet? As its just by the 300 dolar price range
Well Icon makes it to pass all the main world safety standards, including DOT, ECE, SAI AS1698, and SG, so it's pretty safe. -DrewZilla
Is the medium and large shell the same
Yes, they share the same middle shell. If you have any other questions or concerns, please feel free to reach out to our Gear Geeks at cs@revzilla.com or 877.792.9455. Ride safe, -Pat